| Manufacturer | IMEX Bosch |
|---|---|
| Model | BS150/634 |
| Year | 2023 |
| Location | Italy
|
Overview
This listing is for a complete turnkey injection moulding system centered on an IMEX Borche BS150/634 all‑electric injection moulding machine (manufacturer: IMEX Bosch, model: BS150/634, year: 2023). The sale includes the main auxiliaries required for production, supplied together as a single package.
Included equipment
- IMEX Borche BS150/634 all‑electric injection moulding machine
- Industrial Frigo GR2A 20/X industrial chiller
- WTA 6/95 mould temperature controller
- H.Line Box 2+1 multi‑zone mould temperature control unit
- KEBA 2980 control with 12.1" colour touchscreen
- Euromap 67 robot interface
- Euromap 13 interface
- KEPLAST EasyNet remote monitoring system
Key technical specifications
- Year manufactured: 2023
- Clamping force: 150 t (1,600 kN)
- Shot volume: 341 cm³
- Shot weight (PS): 321 g
- Screw diameter: 45 mm
- Screw stroke: 215 mm
- Injection pressure: 185 MPa (equivalent to 1,850 bar)
- Platen size: 670 × 670 mm
- Distance between tie bars (H × V): 460 × 460 mm
- Maximum daylight / opening of the press: 910 mm
- Mould thickness range: 160–500 mm
- Pump motor power: 22 kW
- Heating power: 10.5 kW (5 heating zones)
- Machine dimensions (L × W × H): 4,750 × 1,400 × 1,950 mm
- Weight: 4,300 kg
Condition and additional notes
The system has been used for approximately 50 operating hours and is described as remaining in near‑new condition. The package is offered complete with the listed auxiliary equipment so a purchaser can acquire a full injection moulding system rather than only the machine. Inspection under power is available by appointment.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
The machine is offered as a complete injection moulding system, including the main auxiliary equipment required for production.
The package includes:
-IMEX Borche BS150/634 all-electric injection moulding machine;
-Industrial Frigo GR2A 20/X industrial chiller;
-WTA 6/95 mould temperature controller;
-H.Line Box 2+1 multi-zone mould temperature control unit;
-KEBA 2980 control with 12.1" colour touchscreen;
-Euromap 67 robot interface;
-Euromap 13 interface;
-KEPLAST EasyNet remote monitoring system.
Technical specifications:
-Year: 2023;
-Clamping force: 1600 kN (150 t);
-Injection volume: 341 cm³;
-Shot weight (PS): 321 g;
-Screw diameter: 45 mm;
-Injection pressure: 185 MPa;
-Screw stroke: 215 mm;
-Platen size: 670 × 670 mm;
-Distance between tie bars: 460 × 460 mm;
-Maximum daylight: 910 mm;
-Mould thickness: 160–500 mm;
-Pump motor power: 22 kW;
-Heating power: 10.5 kW;
-Heating zones: 5;
-Machine dimensions: 4,750 × 1,400 × 1,950 mm;
-Weight: 4,300 kg.
The machine has been used for approximately 50 operating hours and remains in near-new condition.
Unlike a standard machine-only sale, this offer includes the complete cooling and mould temperature management equipment, allowing the purchaser to acquire a complete injection moulding system rather than only the moulding machine.
The system is sold complete with all listed auxiliary equipment and is ready for immediate installation and production as a turnkey injection moulding system.
Inspection under power is available by appointment.
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Factory – small or medium company |
| Active since | 2026 |
| Offers online | 3 |
| Last activity | Nov. 1, 2026 |
The machine is offered as a complete injection moulding system, including the main auxiliary equipment required for production.
The package includes:
-IMEX Borche BS150/634 all-electric injection moulding machine;
-Industrial Frigo GR2A 20/X industrial chiller;
-WTA 6/95 mould temperature controller;
-H.Line Box 2+1 multi-zone mould temperature control unit;
-KEBA 2980 control with 12.1" colour touchscreen;
-Euromap 67 robot interface;
-Euromap 13 interface;
-KEPLAST EasyNet remote monitoring system.
Technical specifications:
-Year: 2023;
-Clamping force: 1600 kN (150 t);
-Injection volume: 341 cm³;
-Shot weight (PS): 321 g;
-Screw diameter: 45 mm;
-Injection pressure: 185 MPa;
-Screw stroke: 215 mm;
-Platen size: 670 × 670 mm;
-Distance between tie bars: 460 × 460 mm;
-Maximum daylight: 910 mm;
-Mould thickness: 160–500 mm;
-Pump motor power: 22 kW;
-Heating power: 10.5 kW;
-Heating zones: 5;
-Machine dimensions: 4,750 × 1,400 × 1,950 mm;
-Weight: 4,300 kg.
The machine has been used for approximately 50 operating hours and remains in near-new condition.
Unlike a standard machine-only sale, this offer includes the complete cooling and mould temperature management equipment, allowing the purchaser to acquire a complete injection moulding system rather than only the moulding machine.
The system is sold complete with all listed auxiliary equipment and is ready for immediate installation and production as a turnkey injection moulding system.
Inspection under power is available by appointment.
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
Overview
This listing is for a complete turnkey injection moulding system centered on an IMEX Borche BS150/634 all‑electric injection moulding machine (manufacturer: IMEX Bosch, model: BS150/634, year: 2023). The sale includes the main auxiliaries required for production, supplied together as a single package.
Included equipment
- IMEX Borche BS150/634 all‑electric injection moulding machine
- Industrial Frigo GR2A 20/X industrial chiller
- WTA 6/95 mould temperature controller
- H.Line Box 2+1 multi‑zone mould temperature control unit
- KEBA 2980 control with 12.1" colour touchscreen
- Euromap 67 robot interface
- Euromap 13 interface
- KEPLAST EasyNet remote monitoring system
Key technical specifications
- Year manufactured: 2023
- Clamping force: 150 t (1,600 kN)
- Shot volume: 341 cm³
- Shot weight (PS): 321 g
- Screw diameter: 45 mm
- Screw stroke: 215 mm
- Injection pressure: 185 MPa (equivalent to 1,850 bar)
- Platen size: 670 × 670 mm
- Distance between tie bars (H × V): 460 × 460 mm
- Maximum daylight / opening of the press: 910 mm
- Mould thickness range: 160–500 mm
- Pump motor power: 22 kW
- Heating power: 10.5 kW (5 heating zones)
- Machine dimensions (L × W × H): 4,750 × 1,400 × 1,950 mm
- Weight: 4,300 kg
Condition and additional notes
The system has been used for approximately 50 operating hours and is described as remaining in near‑new condition. The package is offered complete with the listed auxiliary equipment so a purchaser can acquire a full injection moulding system rather than only the machine. Inspection under power is available by appointment.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Factory – small or medium company |
| Active since | 2026 |
| Offers online | 3 |
| Last activity | Nov. 1, 2026 |
Електрическа шприцмашина IMEC Bosch BS150/634
Elektrický vstřikovací lis IMEC Bosch BS150/634
IMEC Bosch BS150/634 Elektrisk sprøjtestøbemaskine
IMEC Bosch BS150/634 Elektrische Spritzgießmaschine
Ηλεκτρική πρέσα έγχυσης IMEC Bosch BS150/634
IMEX Borche BS150/634 all-electric injection moulding system
Inyectora eléctrica IMEC Bosch BS150/634
Presse à injecter électrique IMEC Bosch BS150/634
Električni stroj za injekcijsko prešanje IMEC Bosch BS150/634
IMEC Bosch BS150/634 Elektromos fröccsöntőgép
Pressa a iniezione elettrica IMEC Bosch BS150/634
IMEC Bosch BS150/634 Elektrinės įpurškimo liejimo staklės
IMEC Bosch BS150/634 Elektrische spuitgietmachine
Wtryskarka elektryczna IMEC Bosch BS150/634
Injetora elétrica IMEC Bosch BS150/634
Mașină electrică de injectat IMEC Bosch BS150/634
IMEC Bosch BS150/634 Электрический термопластавтомат
Električna mašina za injekciono prešanje IMEC Bosch BS150/634
IMEC Bosch BS150/634 Elektrisk formsprutningsmaskin
Elektrikli enjeksiyon makinesi IMEC Bosch BS150/634
EN
- Languages
English (GB)