Contact us to receive an offer.
| Manufacturer | HECKERT |
|---|---|
| Model | HEC 630 Athletic |
| Year | 2006 |
| Location | Czech Republic
|
This is a HECKERT HEC 630 Athletic horizontal 4-axis palletized machining center from 2006, designed for versatile and efficient machining operations. It features a travel range of 1200 mm along the X-axis, 950 mm along the Y-axis, and 1200 mm along the Z-axis, allowing for substantial machining capacity. The machine is equipped with two interchangeable pallets, each with a clamping surface measuring 630 x 630 mm, supporting a maximum part weight of up to 1500 kg. The palletized system facilitates efficient workpiece handling and setup.
The machining center includes an 80-tool magazine, capable of handling tools up to 500 mm in diameter and weighing up to 35 kg, enabling a wide range of machining tasks without frequent tool changes. The spindle utilizes an SK 50 taper and supports horizontal milling operations with cooling through the center, enhancing machining precision and tool life. The machine offers a maximum table speed of 70 rpm, a continuously adjustable working feed range, and a rapid traverse rate of 60 m/min, contributing to optimized machining cycles.
Measuring 7500 mm in length, 5200 mm in width, and 4150 mm in height, and weighing approximately 23,000 kg, this machining center is a substantial industrial machine. It comes with tool holders, clamps, and technical documentation.
The machine's exterior is housed in a red and white enclosure and includes a Siemens Sinumerik control panel with a display screen, multiple buttons, knobs, and an attached keyboard for data input. The control panel shows signs of dirt and wear consistent with use. An emergency stop button is located on the front panel for safety. There is a green hose attached to the side of the machine.
The spindle area shows some metal shavings and dirt, indicating recent use, along with some surface rust and wear on metal parts. The exterior shows minor dirt and wear but no visible damage. This machine is well-suited for heavy-duty horizontal machining tasks where palletized operation and a large tool magazine are advantageous.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Horizontal 4-axis, two-pallet machining center,
year 2006
Travel of the X x Y x Z axes 1,200x950x1,200 mm
Table clamping surface 630x630 mm
Max. table speed 70 rpm
Continuously adjustable working feed range
Rapid traverse 60 m/min.
Horizontal milling support
Cooling through the center
Spindle taper SK 50
Max. load 1,500 kg
Number of interchangeable pallets 2
Number of tools in the magazine 80
Max. tool diameter 500 mm
Max. tool weight 35 kg
Machine dimensions lxwxh 7,500 x 5,200 x 4,150 mm
Machine weight 23,000 kg
Tool holders, clamps, technical documentation
Good condition - possible to test.
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Machinery dealer |
| Active since | 2023 |
| Offers online | 74 |
| Last activity | Nov. 11, 2026 |
Horizontal 4-axis, two-pallet machining center,
year 2006
Travel of the X x Y x Z axes 1,200x950x1,200 mm
Table clamping surface 630x630 mm
Max. table speed 70 rpm
Continuously adjustable working feed range
Rapid traverse 60 m/min.
Horizontal milling support
Cooling through the center
Spindle taper SK 50
Max. load 1,500 kg
Number of interchangeable pallets 2
Number of tools in the magazine 80
Max. tool diameter 500 mm
Max. tool weight 35 kg
Machine dimensions lxwxh 7,500 x 5,200 x 4,150 mm
Machine weight 23,000 kg
Tool holders, clamps, technical documentation
Good condition - possible to test.
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
This is a HECKERT HEC 630 Athletic horizontal 4-axis palletized machining center from 2006, designed for versatile and efficient machining operations. It features a travel range of 1200 mm along the X-axis, 950 mm along the Y-axis, and 1200 mm along the Z-axis, allowing for substantial machining capacity. The machine is equipped with two interchangeable pallets, each with a clamping surface measuring 630 x 630 mm, supporting a maximum part weight of up to 1500 kg. The palletized system facilitates efficient workpiece handling and setup.
The machining center includes an 80-tool magazine, capable of handling tools up to 500 mm in diameter and weighing up to 35 kg, enabling a wide range of machining tasks without frequent tool changes. The spindle utilizes an SK 50 taper and supports horizontal milling operations with cooling through the center, enhancing machining precision and tool life. The machine offers a maximum table speed of 70 rpm, a continuously adjustable working feed range, and a rapid traverse rate of 60 m/min, contributing to optimized machining cycles.
Measuring 7500 mm in length, 5200 mm in width, and 4150 mm in height, and weighing approximately 23,000 kg, this machining center is a substantial industrial machine. It comes with tool holders, clamps, and technical documentation.
The machine's exterior is housed in a red and white enclosure and includes a Siemens Sinumerik control panel with a display screen, multiple buttons, knobs, and an attached keyboard for data input. The control panel shows signs of dirt and wear consistent with use. An emergency stop button is located on the front panel for safety. There is a green hose attached to the side of the machine.
The spindle area shows some metal shavings and dirt, indicating recent use, along with some surface rust and wear on metal parts. The exterior shows minor dirt and wear but no visible damage. This machine is well-suited for heavy-duty horizontal machining tasks where palletized operation and a large tool magazine are advantageous.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2023 |
| Offers online | 74 |
| Last activity | Nov. 11, 2026 |
Палетизиран обработващ център HECKERT HEC 630 Athletic
Paletizované obráběcí centrum HECKERT HEC 630 Athletic
HECKERT HEC 630 Athletic Palleteret bearbejdningscenter
HECKERT HEC 630 Athletic Paletten-Bearbeitungszentrum
Παλετοποιημένο κέντρο μηχανουργικής επεξεργασίας HECKERT HEC 630 Athletic
HECKERT HEC 630 Athletic Palletized machining center
Centro de mecanizado paletizado HECKERT HEC 630 Athletic
Centre d’usinage palettisé HECKERT HEC 630 Athletic
Paletizirani obradni centar HECKERT HEC 630 Athletic
HECKERT HEC 630 Athletic Raklapozott megmunkáló központ
Centro di lavoro con cambio pallet HECKERT HEC 630 Athletic
Padėklų apdirbimo centras HECKERT HEC 630 Athletic
HECKERT HEC 630 Athletic Gepalletiseerd bewerkingscentrum
Centrum obróbcze z wymianą palet HECKERT HEC 630 Athletic
Centro de maquinação paletizado HECKERT HEC 630 Athletic
Centru de prelucrare paletizat HECKERT HEC 630 Athletic
HECKERT HEC 630 Athletic Высокоточный обрабатывающий центр
Paletizovani obradni centar HECKERT HEC 630 Athletic
HECKERT HEC 630 Athletic Palleterad bearbetningscentral
Paletli işleme merkezi HECKERT HEC 630 Athletic
EN
- Languages
English (GB)