Contact us to receive an offer.
| Manufacturer | HAITIAN |
|---|---|
| Model | MARS |
| Year | 2022 |
| Location | Poland
|
HAITIAN MARS III 1600/570 ECO injection moulding machine, manufactured in 2022. The machine is identified as a MA1600 III/eco model with injection unit 570 and a 45 mm screw, version B. The seller states that it was purchased new in September 2022.
The listed operating figures are approximately 2,589 total operating hours, including approximately 1,007 hours in automatic mode, and 261,513 shots. These figures are reported from the machine’s control panel. The touchscreen displays a production settings and status interface in Polish; the status bar reads “Robot wyłączony” (“Robot switched off”). This indicates the status shown on the panel and does not establish the machine’s overall operating condition.
The listed electrical specifications are 400 V, 50 Hz, with motor power of 18.5 kW and heater power of 11.45 kW. The machine weighs 5,650 kg. Its listed dimensions are 5,330 mm long, 1,370 mm wide and 2,050 mm high. The stated date of manufacture is March 28, 2022.
This machine is offered as a HAITIAN MARS series injection moulding machine with a Polish-language control interface. The description provides the stated model, injection-unit designation, screw diameter, operating figures and electrical details for reference when assessing its suitability for a production setup.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
HAITIAN MARS III 1600/570 ECO injection molding machine, 2022, low hours
For sale: HAITIAN MARS III 1600/570 ECO plastic injection molding machine, manufactured in 2022. The machine was purchased brand-new in September 2022.
Low operating hours according to the attached photo of the control panel:
* total operating time: approx. 2,589 hours,
* operating time in automatic mode: approx. 1,007 hours,
* total number of shots: 261,513.
Technical specifications:
* model: MA1600 III/eco,
* injection unit: 570,
* screw diameter: 45 mm, version B,
* date of manufacture: March 28, 2022,
* power supply: 400 V, 50 Hz,
* motor power: 18.5 kW,
* heater power: 11.45 kW,
* machine weight: 5,650 kg,
* control panel with menus in Polish.
The photos show the control panel and the nameplate of the machine being offered.
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Factory – small or medium company |
| Active since | 2026 |
| Offers online | 1 |
| Last activity | Nov. 2, 2026 |
HAITIAN MARS III 1600/570 ECO injection molding machine, 2022, low hours
For sale: HAITIAN MARS III 1600/570 ECO plastic injection molding machine, manufactured in 2022. The machine was purchased brand-new in September 2022.
Low operating hours according to the attached photo of the control panel:
* total operating time: approx. 2,589 hours,
* operating time in automatic mode: approx. 1,007 hours,
* total number of shots: 261,513.
Technical specifications:
* model: MA1600 III/eco,
* injection unit: 570,
* screw diameter: 45 mm, version B,
* date of manufacture: March 28, 2022,
* power supply: 400 V, 50 Hz,
* motor power: 18.5 kW,
* heater power: 11.45 kW,
* machine weight: 5,650 kg,
* control panel with menus in Polish.
The photos show the control panel and the nameplate of the machine being offered.
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
HAITIAN MARS III 1600/570 ECO injection moulding machine, manufactured in 2022. The machine is identified as a MA1600 III/eco model with injection unit 570 and a 45 mm screw, version B. The seller states that it was purchased new in September 2022.
The listed operating figures are approximately 2,589 total operating hours, including approximately 1,007 hours in automatic mode, and 261,513 shots. These figures are reported from the machine’s control panel. The touchscreen displays a production settings and status interface in Polish; the status bar reads “Robot wyłączony” (“Robot switched off”). This indicates the status shown on the panel and does not establish the machine’s overall operating condition.
The listed electrical specifications are 400 V, 50 Hz, with motor power of 18.5 kW and heater power of 11.45 kW. The machine weighs 5,650 kg. Its listed dimensions are 5,330 mm long, 1,370 mm wide and 2,050 mm high. The stated date of manufacture is March 28, 2022.
This machine is offered as a HAITIAN MARS series injection moulding machine with a Polish-language control interface. The description provides the stated model, injection-unit designation, screw diameter, operating figures and electrical details for reference when assessing its suitability for a production setup.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Factory – small or medium company |
| Active since | 2026 |
| Offers online | 1 |
| Last activity | Nov. 2, 2026 |
Czech Republic
2022
| Clamping force | 90 T |
|---|---|
| Tie bar spacing (H) | 360 mm |
| Pressure on material | 2340 bar |
| Screw diameter | 36 mm |
|---|---|
| Tie bar spacing (V) | 360 mm |
| Mould size |
Czech Republic
2020
| Clamping force | 90 T |
|---|---|
| Tie bar spacing (H) | 370 mm |
| Shot volume | 100 cm³ |
| Mould size |
| Screw diameter | 32 mm |
|---|---|
| Tie bar spacing (V) | 420 mm |
| Pressure on material | 2000 bar |
Czech Republic
2022
| Clamping force | 60 T |
|---|---|
| Tie bar spacing (H) | 310 mm |
| Shot volume | 68 cm³ |
| Mould size |
| Screw diameter | 28 mm |
|---|---|
| Tie bar spacing (V) | 310 mm |
| Pressure on material | 1840 bar |
Switzerland
2005
| Clamping force | 1000 T |
|---|---|
| Tie bar spacing (H) | 1550 mm |
| Shot weight | 1546 g |
| Platen length | 2070 mm |
| Opening of the press | 2000 mm |
| Screw diameter | 80 mm |
|---|---|
| Tie bar spacing (V) | 1320 mm |
| Pressure on material | 2284.4 bar |
| Platen width | 1840 mm |
| Mould size |
Romania
2019
| Clamping force | 230 T |
|---|---|
| Tie bar spacing (H) | 620 mm |
| Shot volume | 570 cm³ |
| Platen width | 920 mm |
| Mould size | 220-600 |
| Screw diameter | 55 mm |
|---|---|
| Tie bar spacing (V) | 620 mm |
| Platen length | 920 mm |
| Opening of the press | 1150 mm |
| Clamping force | 120 T |
|---|---|
| Tie bar spacing (H) | 480 mm |
| Pressure on material | 154 bar |
| Platen width | 670 mm |
| Mould size | 180/550 mm |
| Screw diameter | 35 mm |
|---|---|
| Tie bar spacing (V) | 550 mm |
| Platen length | 720 mm |
| Opening of the press | 400 mm |
| Clamping force | 110 T |
|---|---|
| Tie bar spacing (H) | 510 mm |
| Shot volume | 168 cm³ |
| Platen length | 730 mm |
| Opening of the press | 400 mm |
| Screw diameter | 35 mm |
|---|---|
| Tie bar spacing (V) | 460 mm |
| Pressure on material | 2400 bar |
| Platen width | 680 mm |
| Mould size |
| Clamping force | 110 T |
|---|---|
| Tie bar spacing (H) | 510 mm |
| Shot volume | 168 cm³ |
| Platen length | 730 mm |
| Opening of the press | 400 mm |
| Screw diameter | 35 mm |
|---|---|
| Tie bar spacing (V) | 460 mm |
| Pressure on material | 2400 bar |
| Platen width | 680 mm |
| Mould size |
| Clamping force | 450 T |
|---|---|
| Tie bar spacing (H) | 810 mm |
| Shot volume | 1663 cm³ |
| Opening of the press | 800 mm |
| Screw diameter | 84 mm |
|---|---|
| Tie bar spacing (V) | 810 mm |
| Pressure on material | 1510 bar |
| Mould size | 160/420 mm |
| Clamping force | 300 T |
|---|---|
| Tie bar spacing (H) | 710 mm |
| Shot volume | 763 cm³ |
| Platen length | 1380 mm |
| Opening of the press | 670 mm |
| Screw diameter | 60 mm |
|---|---|
| Tie bar spacing (V) | 830 mm |
| Pressure on material | 1970 bar |
| Platen width | 1500 mm |
| Mould size | 330 |
Poland
2024
| Clamping force | 450 T |
|---|---|
| Tie bar spacing (H) | 720 mm |
| Shot volume | 1590 cm³ |
| Pressure on material | 1600 bar |
| Screw diameter | 73 mm |
|---|---|
| Tie bar spacing (V) | 720 mm |
| Shot weight | 1430 g |
| Mould size |
| Clamping force | 155 T |
|---|---|
| Tie bar spacing (V) | 520 mm |
| Platen width | 780 mm |
| Mould size | 200 |
| Tie bar spacing (H) | 520 mm |
|---|---|
| Platen length | 780 mm |
| Opening of the press | 440 mm |
| Clamping force | 100 T |
|---|---|
| Tie bar spacing (H) | 420 mm |
| Shot volume | 144 cm³ |
| Pressure on material | 2000 bar |
| Platen width | 570 mm |
| Mould size |
| Screw diameter | 35 mm |
|---|---|
| Tie bar spacing (V) | 420 mm |
| Shot weight | 132 g |
| Platen length | 570 mm |
| Opening of the press | 750 mm |
Poland
2003
| Clamping force | 50 T |
|---|---|
| Tie bar spacing (H) | 320 mm |
| Shot volume | 58 cm³ |
| Opening of the press | 250 mm |
| Screw diameter | 28 mm |
|---|---|
| Tie bar spacing (V) | 320 mm |
| Pressure on material | 1700 bar |
| Mould size | 150 |
| Clamping force | 300 T |
|---|---|
| Tie bar spacing (H) | 710 mm |
| Shot volume | 763 cm³ |
| Platen length | 1380 mm |
| Opening of the press | 670 mm |
| Screw diameter | 60 mm |
|---|---|
| Tie bar spacing (V) | 830 mm |
| Pressure on material | 1970 bar |
| Platen width | 1500 mm |
| Mould size | 330mm |
| Clamping force | 1600 T |
|---|---|
| Tie bar spacing (H) | 520 mm |
| Shot volume | 220 cm³ |
| Platen length | 760 mm |
| Opening of the press | 460 mm |
| Screw diameter | 40 mm |
|---|---|
| Tie bar spacing (V) | 520 mm |
| Pressure on material | 1940 bar |
| Platen width | 760 mm |
| Mould size |
| Clamping force | 150 T |
|---|
| Mould size |
|---|
| Clamping force | 150 T |
|---|---|
| Tie bar spacing (H) | 545 mm |
| Shot volume | 88 cm³ |
| Platen length | 765 mm |
| Opening of the press | 500 mm |
| Screw diameter | 28 mm |
|---|---|
| Tie bar spacing (V) | 545 mm |
| Pressure on material | 2200 bar |
| Platen width | 765 mm |
| Mould size |
Czech Republic
2011
| Mould size |
|---|
| Clamping force | 200 T |
|---|---|
| Mould size |
| Pressure on material | 1130 bar |
|---|
| Clamping force | 388 T |
|---|---|
| Tie bar spacing (H) | 750 mm |
| Shot volume | 929 cm³ |
| Platen width | 1060 mm |
| Mould size |
| Screw diameter | 65 mm |
|---|---|
| Tie bar spacing (V) | 700 mm |
| Platen length | 1100 mm |
| Opening of the press | 650 mm |
| Clamping force | 478 T |
|---|---|
| Tie bar spacing (H) | 850 mm |
| Shot volume | 1251 cm³ |
| Platen width | 1220 mm |
| Mould size |
| Screw diameter | 70 mm |
|---|---|
| Tie bar spacing (V) | 800 mm |
| Platen length | 1270 mm |
| Opening of the press | 710 mm |
| Clamping force | 200 T |
|---|---|
| Tie bar spacing (H) | 570 mm |
| Shot volume | 678 cm³ |
| Mould size |
| Screw diameter | 60 mm |
|---|---|
| Tie bar spacing (V) | 570 mm |
| Pressure on material | 2000 bar |
Turkey
2005
| Clamping force | 25 T |
|---|---|
| Tie bar spacing (V) | 221 mm |
| Tie bar spacing (H) | 221 mm |
|---|---|
| Mould size |
| Clamping force | 55 T |
|---|---|
| Mould size |
| Screw diameter | 25 mm |
|---|
Poland
2007
| Clamping force | 100 T |
|---|---|
| Tie bar spacing (H) | 420 mm |
| Shot volume | 217 cm³ |
| Pressure on material | 1865 bar |
| Platen width | 600 mm |
| Screw diameter | 40 mm |
|---|---|
| Tie bar spacing (V) | 419 mm |
| Shot weight | 192 g |
| Platen length | 600 mm |
| Mould size | 200 |
Czech Republic
1997
| Mould size |
|---|
| Clamping force | 200 T |
|---|---|
| Tie bar spacing (H) | 570 mm |
| Shot volume | 353 cm³ |
| Pressure on material | 2400 bar |
| Platen width | 795 mm |
| Mould size |
| Screw diameter | 55 mm |
|---|---|
| Tie bar spacing (V) | 570 mm |
| Shot weight | 384 g |
| Platen length | 795 mm |
| Opening of the press | 650 mm |
| Clamping force | 200 T |
|---|---|
| Tie bar spacing (H) | 520 mm |
| Shot weight | 297 g |
| Screw diameter | 50 mm |
|---|---|
| Tie bar spacing (V) | 520 mm |
| Mould size |
Електрическа шприцмашина HAITIAN MARS
Elektrický vstřikovací lis HAITIAN MARS
HAITIAN MARS Elektrisk sprøjtestøbemaskine
HAITIAN MARS Elektrische Spritzgießmaschine
Ηλεκτρική πρέσα έγχυσης HAITIAN MARS
HAITIAN MARS Electric injection moulding machine
Inyectora eléctrica HAITIAN MARS
Presse à injecter électrique HAITIAN MARS
Električni stroj za injekcijsko prešanje HAITIAN MARS
HAITIAN MARS Elektromos fröccsöntőgép
Pressa a iniezione elettrica HAITIAN MARS
HAITIAN MARS Elektrinės įpurškimo liejimo staklės
HAITIAN MARS Elektrische spuitgietmachine
Wtryskarka elektryczna HAITIAN MARS
Injetora elétrica HAITIAN MARS
Mașină electrică de injectat HAITIAN MARS
HAITIAN MARS Электрический термопластавтомат
Električna mašina za injekciono prešanje HAITIAN MARS
HAITIAN MARS Elektrisk formsprutningsmaskin
Elektrikli enjeksiyon makinesi HAITIAN MARS
France
Germany
Slovakia
Azerbaijan
EN
- Languages
English (GB)