Contact us to receive an offer.
| Manufacturer | FAT HACO WROCLAW |
|---|---|
| Model | TUR 630MN x2000 |
| Year | 2002 |
| Location | Poland
|
The FAT HACO WROCLAW TUR 630MN x2000 is a CNC lathe designed for precision turning operations. It features a turning length of 2000 mm and a maximum turning diameter above the bed of 630 mm, with a spindle bore of 105 mm. The machine supports a maximum workpiece weight of 3000 kg, making it suitable for heavy-duty applications. The lathe is equipped with a single turret holding 8 tools, enabling versatile machining capabilities.
Powered by an 18.5 kW spindle motor, the machine can reach a maximum turning speed of 2500 rpm. The spindle offers two gears and a torque of 2100 Nm, with a chuck mounting taper of D1-8. The tailstock includes a sleeve diameter of 100 mm with an MK 5 cone and a pin extension of 200 mm. The bed width is 433 mm, supporting the guides both at the back.
This CNC lathe includes a Siemens 810 MANUAL TURN control system, which allows for simple cycles and the programming of complex contours. An encoder on the spindle enhances thread quality and spindle positioning. Manual operation is also possible via handwheels, similar to conventional lathes.
The machine is housed within enclosed safety doors featuring transparent windows on both sides, ensuring operator safety while maintaining visibility. A control panel with a screen and various buttons and dials is located on the right side for ease of use. The chuck mounted on the spindle inside the enclosure is designed for secure workpiece holding.
The lathe appears clean and well-maintained with no visible exterior damage. It weighs approximately 5500 kg, with dimensions of 4800 mm in length, 2250 mm in width, and 1850 mm in height.
Additional equipment includes a Sauter 8-position tool head with 4 tool holders, a 3-jaw self-centering chuck (model 315 SCHUNK) with quick-change jaws (hard and soft), a fixed support, and a chip conveyor located at the back of the machine (not visible in the photos). Technical documentation is provided in Polish, including electrical diagrams and a spare parts list with drawings.
The lathe is ready for operation with acceptance tests conducted in Wroclaw. There is a possibility to modify or retrofit the equipment. Support services such as start-up, training in operation and programming, full service support, and spare parts are offered by the manufacturer's service, FAT WROCŁAW.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
TUR 630MN x2000 lathe ready for pickup Photos realistic - of this machine
Technical documentation DTR in PL language, electrical diagrams, spare parts list with drawings
Lathe ready for turning, acceptance tests in Wroclaw. Possibility of changing the equipment or retrofitting the machine.
In addition, start-up and training in operation and programming by the manufacturer's service FAT WROCŁAW and full service support as well as spare parts!!!
Very good condition after overhaul ( new bearings, Z and X bolts, belts, aligned geometry, cleaned electronics )
Turning accuracy on a shaft of length L=300mm in 0.02mm!!!
TUR 630 MN x 2000
Sauter 8-position tool head + 4 tool holders
3-jaw self-centering chuck 315 SCHUNK with quick-change jaws hard + soft !!!
Fixed support
Chip conveyor at the back of the machine (not shown in the photo) !!!
Siemens 810 MANUAL TURN control with simple cycles as well as the ability to write complex contours
Thanks to the encoder on the spindle, the possibility of improving the threads and positioning of the spindle
Possibility to work manually - with wheels as on a conventional machine
Turning diameter above the bed 630mm
Turning diameter above the slide 380mm
Turning length 2000mm
Spindle clearance 105mm Chuck mounting D1-8 taper
Motor 18.5KW, torque 2100Nm Two gears, Max speed 2500rpm
Tailstock sleeve 100mm, MK 5 cone, pin extension 200mm
Bed width 433mm guides both BACK
Weight of the machine about 5500kg
Technical documentation DTR in PL language, electrical diagrams, spare parts list with drawings
Lathe ready for turning, acceptance tests in Wroclaw. Possibility of changing the equipment or retrofitting the machine.
In addition, start-up and training in operation and programming by the manufacturer's service FAT WROCŁAW and full service support as well as spare parts!!!
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
When was this FAT HACO WROCLAW TUR 630MN x2000 manufactured?
This FAT HACO WROCLAW TUR 630MN x2000 CNC lathe was manufactured in 2002.
What is the turning capacity of the machine?
This CNC lathe has a turning capacity of 630 mm.
What is the working length of this CNC lathe?
This FAT HACO WROCLAW TUR 630MN x2000 CNC lathe has a working length of 2000 mm.
Does this equipment have a CNC control system?
This equipment is equipped with a CNC control system.
Is the machine currently under power?
The machine is currently under power.
The following questions and answers are generated using artificial intelligence based on the product information available. They are provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2022 |
| Offers online | 6 |
| Last activity | Sept. 15, 2026 |
TUR 630MN x2000 lathe ready for pickup Photos realistic - of this machine
Technical documentation DTR in PL language, electrical diagrams, spare parts list with drawings
Lathe ready for turning, acceptance tests in Wroclaw. Possibility of changing the equipment or retrofitting the machine.
In addition, start-up and training in operation and programming by the manufacturer's service FAT WROCŁAW and full service support as well as spare parts!!!
Very good condition after overhaul ( new bearings, Z and X bolts, belts, aligned geometry, cleaned electronics )
Turning accuracy on a shaft of length L=300mm in 0.02mm!!!
TUR 630 MN x 2000
Sauter 8-position tool head + 4 tool holders
3-jaw self-centering chuck 315 SCHUNK with quick-change jaws hard + soft !!!
Fixed support
Chip conveyor at the back of the machine (not shown in the photo) !!!
Siemens 810 MANUAL TURN control with simple cycles as well as the ability to write complex contours
Thanks to the encoder on the spindle, the possibility of improving the threads and positioning of the spindle
Possibility to work manually - with wheels as on a conventional machine
Turning diameter above the bed 630mm
Turning diameter above the slide 380mm
Turning length 2000mm
Spindle clearance 105mm Chuck mounting D1-8 taper
Motor 18.5KW, torque 2100Nm Two gears, Max speed 2500rpm
Tailstock sleeve 100mm, MK 5 cone, pin extension 200mm
Bed width 433mm guides both BACK
Weight of the machine about 5500kg
Technical documentation DTR in PL language, electrical diagrams, spare parts list with drawings
Lathe ready for turning, acceptance tests in Wroclaw. Possibility of changing the equipment or retrofitting the machine.
In addition, start-up and training in operation and programming by the manufacturer's service FAT WROCŁAW and full service support as well as spare parts!!!
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
When was this FAT HACO WROCLAW TUR 630MN x2000 manufactured?
This FAT HACO WROCLAW TUR 630MN x2000 CNC lathe was manufactured in 2002.
What is the turning capacity of the machine?
This CNC lathe has a turning capacity of 630 mm.
What is the working length of this CNC lathe?
This FAT HACO WROCLAW TUR 630MN x2000 CNC lathe has a working length of 2000 mm.
Does this equipment have a CNC control system?
This equipment is equipped with a CNC control system.
Is the machine currently under power?
The machine is currently under power.
The following questions and answers are generated using artificial intelligence based on the product information available. They are provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
The FAT HACO WROCLAW TUR 630MN x2000 is a CNC lathe designed for precision turning operations. It features a turning length of 2000 mm and a maximum turning diameter above the bed of 630 mm, with a spindle bore of 105 mm. The machine supports a maximum workpiece weight of 3000 kg, making it suitable for heavy-duty applications. The lathe is equipped with a single turret holding 8 tools, enabling versatile machining capabilities.
Powered by an 18.5 kW spindle motor, the machine can reach a maximum turning speed of 2500 rpm. The spindle offers two gears and a torque of 2100 Nm, with a chuck mounting taper of D1-8. The tailstock includes a sleeve diameter of 100 mm with an MK 5 cone and a pin extension of 200 mm. The bed width is 433 mm, supporting the guides both at the back.
This CNC lathe includes a Siemens 810 MANUAL TURN control system, which allows for simple cycles and the programming of complex contours. An encoder on the spindle enhances thread quality and spindle positioning. Manual operation is also possible via handwheels, similar to conventional lathes.
The machine is housed within enclosed safety doors featuring transparent windows on both sides, ensuring operator safety while maintaining visibility. A control panel with a screen and various buttons and dials is located on the right side for ease of use. The chuck mounted on the spindle inside the enclosure is designed for secure workpiece holding.
The lathe appears clean and well-maintained with no visible exterior damage. It weighs approximately 5500 kg, with dimensions of 4800 mm in length, 2250 mm in width, and 1850 mm in height.
Additional equipment includes a Sauter 8-position tool head with 4 tool holders, a 3-jaw self-centering chuck (model 315 SCHUNK) with quick-change jaws (hard and soft), a fixed support, and a chip conveyor located at the back of the machine (not visible in the photos). Technical documentation is provided in Polish, including electrical diagrams and a spare parts list with drawings.
The lathe is ready for operation with acceptance tests conducted in Wroclaw. There is a possibility to modify or retrofit the equipment. Support services such as start-up, training in operation and programming, full service support, and spare parts are offered by the manufacturer's service, FAT WROCŁAW.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2022 |
| Offers online | 6 |
| Last activity | Sept. 15, 2026 |
cnc струг FAT HACO WROCLAW TUR 630MN x2000
Soustruh cnc FAT HACO WROCLAW TUR 630MN x2000
FAT HACO WROCLAW TUR 630MN x2000 cnc drejebænk
FAT HACO WROCLAW TUR 630MN x2000 Drehmaschine CNC
cnc τόρνος FAT HACO WROCLAW TUR 630MN x2000
FAT HACO WROCLAW TUR 630MN x2000 cnc lathe
Torno cnc FAT HACO WROCLAW TUR 630MN x2000
Tour cnc FAT HACO WROCLAW TUR 630MN x2000
cnc tokarski stroj FAT HACO WROCLAW TUR 630MN x2000
FAT HACO WROCLAW TUR 630MN x2000 cnc eszterga
Tornio cnc FAT HACO WROCLAW TUR 630MN x2000
cnc tekinimo staklės FAT HACO WROCLAW TUR 630MN x2000
FAT HACO WROCLAW TUR 630MN x2000 cnc-draaibank
Tokarka CNC FAT HACO WROCLAW TUR 630MN x2000
Torno CNC FAT HACO WROCLAW TUR 630MN x2000
strung cnc FAT HACO WROCLAW TUR 630MN x2000
FAT HACO WROCLAW TUR 630MN x2000 Токарный станок с ЧПУ
cnc strug FAT HACO WROCLAW TUR 630MN x2000
FAT HACO WROCLAW TUR 630MN x2000 cnc svarv
Cnc torna FAT HACO WROCLAW TUR 630MN x2000
EN
- Languages
English (GB)