Contact us to receive an offer.
| Manufacturer | ENGEL |
|---|---|
| Model | ES 1050/350 K |
| Year | 1997 |
| Location | Poland
|
The ENGEL ES 1050/350 K is a robust injection moulding machine manufactured in 1997, designed for high-performance plastic processing. It features a screw diameter of 50 mm with a length-to-diameter ratio of 20, enabling efficient plasticizing and injection. The machine offers a dispensing stroke of 215 mm and an auger speed ranging from 5 to 240 rpm. Its plasticizing capacity is 28 g/sec, while the injection capacity reaches 217 g/sec, with an increased pressure injection capacity of 166 g/sec. The maximum injection volume is 422 cm³, with a specific injection pressure of 2300 bar and a maximum injection pressure of 1950 bar. The nozzle diameter is 4 mm, supported by a nozzle clamping force of 67 kN. Heating is managed through 5 heating zones with a total heating power of 15.3 kW.
The closing unit provides a clamping force of 3500 kN (350 T), with a maximum limit of 3850 kN. It has a mould opening stroke of 700 mm, a pushing force of 70 kN, and a pushing stroke of 240 mm. The machine accommodates moulds with heights ranging from 250 mm to 660 mm. The mould table measures 1080 mm by 1090 mm, supported by four metal tie bars with horizontal and vertical spacing of 735 mm each and a column diameter of 130 mm.
The drive system includes a 30 kW pump drive power and an oil system capacity of 700 liters. It operates with a dry cycle time of 2.8 seconds. The net weight of the machine is approximately 20,000 kg.
Visually, the machine has a green body with a transparent safety door on the left side and features a control panel with multiple buttons and a screen on the right side. Four large metal tie bars are prominently positioned at the front. Protective transparent safety guards surround the operational area. The machine shows some signs of wear and dirt on its painted surfaces, consistent with typical industrial use. A Sepro robotic arm is mounted above an attached conveyor belt system, indicating automation capabilities, although the machine itself is not equipped with a robot. The surrounding environment appears to be a factory or warehouse setting with packaging materials nearby.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Technical data of ENGEL ES 1050/350 K injection moulding machine
Injection molding unit
Screw diameter [mm]: 50
Screw length [L/D]: 20
Dispensing stroke [mm]: 215
Auger speed [r/min]: 5-240
Plasticizing capacity [g/sec]: 28
Injection capacity [g/sec]: 217
Injection capacity (increased pressure) [g/sec]: 166
Maximum injection volume [cm³]: 422
Maximum injection pressure [bar]: 1950
Specific injection pressure [bar]: 2300
Nozzle diameter [mm]: 4
Nozzle clamping force [kN]: 67
Heating power [kW]: 15.3
Number of heating zones: 5
Closing unit
Closing force [kN]: 3500
Maximum limit [kN]: 3850
Mould opening stroke [mm]: 700
Pushing force [kN]: 70
Pushing stroke [mm]: 240
Maximum mold height [mm]: 660
Minimum mold height [mm]: 250
Mould table size [mm]: 1080 x 1090
Horizontal column spacing [mm]: 735
Column spacing vertically [mm]: 735
Column diameter [mm]: 130
Drive
Pump drive power [kW]: 30
Oil system capacity [L]: 700
Dry cycle time [sec]: 2.8
Weight
Net [T]: 20
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Factory – small or medium company |
| Active since | 2025 |
| Offers online | 3 |
| Last activity | Oct. 14, 2026 |
Technical data of ENGEL ES 1050/350 K injection moulding machine
Injection molding unit
Screw diameter [mm]: 50
Screw length [L/D]: 20
Dispensing stroke [mm]: 215
Auger speed [r/min]: 5-240
Plasticizing capacity [g/sec]: 28
Injection capacity [g/sec]: 217
Injection capacity (increased pressure) [g/sec]: 166
Maximum injection volume [cm³]: 422
Maximum injection pressure [bar]: 1950
Specific injection pressure [bar]: 2300
Nozzle diameter [mm]: 4
Nozzle clamping force [kN]: 67
Heating power [kW]: 15.3
Number of heating zones: 5
Closing unit
Closing force [kN]: 3500
Maximum limit [kN]: 3850
Mould opening stroke [mm]: 700
Pushing force [kN]: 70
Pushing stroke [mm]: 240
Maximum mold height [mm]: 660
Minimum mold height [mm]: 250
Mould table size [mm]: 1080 x 1090
Horizontal column spacing [mm]: 735
Column spacing vertically [mm]: 735
Column diameter [mm]: 130
Drive
Pump drive power [kW]: 30
Oil system capacity [L]: 700
Dry cycle time [sec]: 2.8
Weight
Net [T]: 20
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
The ENGEL ES 1050/350 K is a robust injection moulding machine manufactured in 1997, designed for high-performance plastic processing. It features a screw diameter of 50 mm with a length-to-diameter ratio of 20, enabling efficient plasticizing and injection. The machine offers a dispensing stroke of 215 mm and an auger speed ranging from 5 to 240 rpm. Its plasticizing capacity is 28 g/sec, while the injection capacity reaches 217 g/sec, with an increased pressure injection capacity of 166 g/sec. The maximum injection volume is 422 cm³, with a specific injection pressure of 2300 bar and a maximum injection pressure of 1950 bar. The nozzle diameter is 4 mm, supported by a nozzle clamping force of 67 kN. Heating is managed through 5 heating zones with a total heating power of 15.3 kW.
The closing unit provides a clamping force of 3500 kN (350 T), with a maximum limit of 3850 kN. It has a mould opening stroke of 700 mm, a pushing force of 70 kN, and a pushing stroke of 240 mm. The machine accommodates moulds with heights ranging from 250 mm to 660 mm. The mould table measures 1080 mm by 1090 mm, supported by four metal tie bars with horizontal and vertical spacing of 735 mm each and a column diameter of 130 mm.
The drive system includes a 30 kW pump drive power and an oil system capacity of 700 liters. It operates with a dry cycle time of 2.8 seconds. The net weight of the machine is approximately 20,000 kg.
Visually, the machine has a green body with a transparent safety door on the left side and features a control panel with multiple buttons and a screen on the right side. Four large metal tie bars are prominently positioned at the front. Protective transparent safety guards surround the operational area. The machine shows some signs of wear and dirt on its painted surfaces, consistent with typical industrial use. A Sepro robotic arm is mounted above an attached conveyor belt system, indicating automation capabilities, although the machine itself is not equipped with a robot. The surrounding environment appears to be a factory or warehouse setting with packaging materials nearby.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Factory – small or medium company |
| Active since | 2025 |
| Offers online | 3 |
| Last activity | Oct. 14, 2026 |
Germany
2007
| Robot interface |
|---|
| Mould size |
|---|
| Clamping force | 250 T |
|---|---|
| Tie bar spacing (H) | 685 mm |
| Shot weight | 679 g |
| Platen length | 1005 mm |
| Bi-metal screw | No |
| Robot interface | |
| Number of heating zones | 6 |
| Mould size | 280-700 |
| Screw diameter | 60 mm |
|---|---|
| Tie bar spacing (V) | 735 mm |
| Pressure on material | 998 bar |
| Platen width | 950 mm |
| Equipped with robot | No |
| Number of cores | 4 |
| Opening of the press | 550 mm |
| Clamping force | 120 T |
|---|---|
| Shot volume | 99 cm³ |
| Number of cores | 2 |
| Mould size | 700 |
| Screw diameter | 30 mm |
|---|---|
| Robot interface | |
| Opening of the press | 800 mm |
Germany
2009
| Clamping force | 600 T |
|---|---|
| Equipped with robot | Yes |
| Mould size |
| Shot volume | 2480 cm³ |
|---|---|
| Robot interface | Euromap 67 |
| Clamping force | 650 T |
|---|---|
| Tie bar spacing (H) | 900 mm |
| Shot volume | 1960 cm³ |
| Equipped with robot | Yes |
| Mould size |
| Screw diameter | 80 mm |
|---|---|
| Tie bar spacing (V) | 900 mm |
| Shot weight | 1765 g |
| Robot interface |
| Clamping force | 1100 T |
|---|---|
| Tie bar spacing (H) | 1150 mm |
| Shot volume | 10950 cm³ |
| Platen length | 1150 mm |
| Robot interface | |
| Mould size |
| Screw diameter | 150 mm |
|---|---|
| Tie bar spacing (V) | 1400 mm |
| Pressure on material | 1350 bar |
| Platen width | 1400 mm |
| Opening of the press | 1800 mm |
| Clamping force | 45 T |
|---|---|
| Shot volume | 135 cm³ |
| Platen length | 550 mm |
| Robot interface | |
| Opening of the press | 350 mm |
| Screw diameter | 35 mm |
|---|---|
| Pressure on material | 1065 bar |
| Platen width | 330 mm |
| Number of heating zones | 4 |
| Mould size |
France
1999
| Clamping force | 1100 T |
|---|---|
| Tie bar spacing (H) | 1150 mm |
| Shot volume | 10955 cm³ |
| Pressure on material | 1330 bar |
| Platen width | 2040 mm |
| Equipped with robot | No |
| Opening of the press | 1800 mm |
| Screw diameter | 150 mm |
|---|---|
| Tie bar spacing (V) | 1400 mm |
| Shot weight | 1600 g |
| Platen length | 2360 mm |
| Bi-metal screw | No |
| Robot interface | |
| Mould size |
France
1998
| Clamping force | 550 T |
|---|---|
| Tie bar spacing (H) | 915 mm |
| Shot weight | 1800 g |
| Platen width | 1280 mm |
| Mould size |
| Screw diameter | 80 mm |
|---|---|
| Tie bar spacing (V) | 860 mm |
| Platen length | 1345 mm |
| Robot interface |
| Clamping force | 130 T |
|---|---|
| Shot volume | 106 cm³ |
| Platen length | 850 mm |
| Robot interface | |
| Mould size |
| Screw diameter | 30 mm |
|---|---|
| Pressure on material | 846 bar |
| Platen width | 750 mm |
| Number of cores | 2 |
| Clamping force | 110 T |
|---|---|
| Shot volume | 113 cm³ |
| Robot interface |
| Screw diameter | 30 mm |
|---|---|
| Pressure on material | 2180 bar |
| Mould size |
| Clamping force | 300 T |
|---|---|
| Tie bar spacing (H) | 1200 mm |
| Shot volume | 192 cm³ |
| Mould size |
| Screw diameter | 70 mm |
|---|---|
| Tie bar spacing (V) | 1180 mm |
| Robot interface |
Germany
2001
| Clamping force | 900 T |
|---|---|
| Tie bar spacing (H) | 1170 mm |
| Shot volume | 4940 cm³ |
| Platen length | 1650 mm |
| Robot interface |
| Screw diameter | 105 mm |
|---|---|
| Tie bar spacing (V) | 1000 mm |
| Shot weight | 4.94 g |
| Platen width | 1515 mm |
| Mould size |
Germany
2003
| Clamping force | 25 T |
|---|---|
| Platen length | 300 mm |
| Robot interface | |
| Mould size |
| Screw diameter | 25 mm |
|---|---|
| Platen width | 300 mm |
| Opening of the press | 330 mm |
South Korea
2009
| Clamping force | 220 T |
|---|---|
| Robot interface |
| Screw diameter | 50 mm |
|---|---|
| Mould size |
| Clamping force | 300 T |
|---|---|
| Tie bar spacing (H) | 635 mm |
| Shot volume | 735 cm³ |
| Robot interface |
| Screw diameter | 60 mm |
|---|---|
| Tie bar spacing (V) | 635 mm |
| Equipped with robot | No |
| Mould size |
Germany
2006
| Robot interface |
|---|
| Mould size |
|---|
| Clamping force | 80 T |
|---|---|
| Pressure on material | 128 bar |
| Mould size |
| Screw diameter | 25 mm |
|---|---|
| Robot interface |
| Clamping force | 350 T |
|---|---|
| Mould size |
| Robot interface |
|---|
| Clamping force | 110 T |
|---|---|
| Shot volume | 251 cm³ |
| Mould size |
| Screw diameter | 40 mm |
|---|---|
| Robot interface |
Mexico
1998
| Clamping force | 200 T |
|---|---|
| Tie bar spacing (H) | 530 mm |
| Shot volume | 99 cm³ |
| Pressure on material | 1450 bar |
| Platen width | 330 mm |
| Equipped with robot | Yes |
| Number of cores | 1 |
| Opening of the press | 950 mm |
| Screw diameter | 40 mm |
|---|---|
| Tie bar spacing (V) | 330 mm |
| Shot weight | 89 g |
| Platen length | 550 mm |
| Bi-metal screw | No |
| Robot interface | |
| Number of heating zones | 4 |
| Mould size | 180 |
| Clamping force | 200 T |
|---|---|
| Tie bar spacing (H) | 550 mm |
| Shot volume | 99 cm³ |
| Pressure on material | 1450 bar |
| Platen width | 330 mm |
| Equipped with robot | Yes |
| Number of cores | 1 |
| Opening of the press | 950 mm |
| Screw diameter | 40 mm |
|---|---|
| Tie bar spacing (V) | 430 mm |
| Shot weight | 89 g |
| Platen length | 550 mm |
| Bi-metal screw | No |
| Robot interface | |
| Number of heating zones | 4 |
| Mould size | 180 |
| Clamping force | 600 T |
|---|---|
| Tie bar spacing (H) | 740 mm |
| Shot volume | 208 cm³ |
| Pressure on material | 1430 bar |
| Platen width | 750 mm |
| Robot interface | |
| Mould size |
| Screw diameter | 35 mm |
|---|---|
| Tie bar spacing (V) | 680 mm |
| Shot weight | 186 g |
| Platen length | 750 mm |
| Equipped with robot | Yes |
| Opening of the press | 700 mm |
Mexico
1998
| Clamping force | 600 T |
|---|---|
| Tie bar spacing (H) | 740 mm |
| Shot volume | 208 cm³ |
| Pressure on material | 1430 bar |
| Platen width | 750 mm |
| Robot interface | |
| Mould size |
| Screw diameter | 35 mm |
|---|---|
| Tie bar spacing (V) | 680 mm |
| Shot weight | 186 g |
| Platen length | 750 mm |
| Equipped with robot | Yes |
| Opening of the press | 700 mm |
Mexico
1998
| Clamping force | 600 T |
|---|---|
| Tie bar spacing (H) | 740 mm |
| Shot volume | 208 cm³ |
| Pressure on material | 1430 bar |
| Platen width | 750 mm |
| Robot interface | |
| Mould size |
| Screw diameter | 35 mm |
|---|---|
| Tie bar spacing (V) | 680 mm |
| Shot weight | 186 g |
| Platen length | 750 mm |
| Equipped with robot | Yes |
| Opening of the press | 700 mm |
Mexico
1998
| Clamping force | 600 T |
|---|---|
| Tie bar spacing (H) | 740 mm |
| Shot volume | 208 cm³ |
| Pressure on material | 1430 bar |
| Platen width | 750 mm |
| Robot interface | |
| Mould size |
| Screw diameter | 35 mm |
|---|---|
| Tie bar spacing (V) | 680 mm |
| Shot weight | 186 g |
| Platen length | 750 mm |
| Equipped with robot | Yes |
| Opening of the press | 700 mm |
Mexico
1998
| Clamping force | 600 T |
|---|---|
| Shot weight | 56.8 g |
| Platen width | 429.3 mm |
| Mould size |
| Screw diameter | 35 mm |
|---|---|
| Platen length | 650.2 mm |
| Robot interface |
Mexico
1998
| Clamping force | 600 T |
|---|---|
| Tie bar spacing (H) | 740 mm |
| Shot volume | 208 cm³ |
| Pressure on material | 1430 bar |
| Platen width | 750 mm |
| Robot interface | |
| Mould size |
| Screw diameter | 35 mm |
|---|---|
| Tie bar spacing (V) | 680 mm |
| Shot weight | 186 g |
| Platen length | 750 mm |
| Equipped with robot | Yes |
| Opening of the press | 700 mm |
Mexico
1997
| Clamping force | 600 T |
|---|---|
| Tie bar spacing (H) | 740 mm |
| Shot volume | 208 cm³ |
| Pressure on material | 1430 bar |
| Platen width | 750 mm |
| Robot interface | |
| Mould size |
| Screw diameter | 35 mm |
|---|---|
| Tie bar spacing (V) | 680 mm |
| Shot weight | 186 g |
| Platen length | 750 mm |
| Equipped with robot | Yes |
| Opening of the press | 700 mm |
Машина за леене под налягане ENGEL ES 1050/350 K
Vstřikolis ENGEL ES 1050/350 K
ENGEL ES 1050/350 K Sprøjtestøbemaskine
ENGEL ES 1050/350 K Spritzgießmaschine
Μηχανή χύτευσης με έγχυση ENGEL ES 1050/350 K
ENGEL ES 1050/350 K Injection moulding machine
Inyectora de plástico ENGEL ES 1050/350 K
Presse à injecter ENGEL ES 1050/350 K
Stroj za injekcijsko prešanje ENGEL ES 1050/350 K
ENGEL ES 1050/350 K Fröccsöntő gép
Pressa ad iniezione ENGEL ES 1050/350 K
Įpurškimo formavimo mašina ENGEL ES 1050/350 K
ENGEL ES 1050/350 K Spuitgietmachine
Wtryskarka ENGEL ES 1050/350 K
Máquina de injecção ENGEL ES 1050/350 K
Mașină de turnat prin injecție ENGEL ES 1050/350 K
ENGEL ES 1050/350 K Термопластавтомат
Mašina za brizganje ENGEL ES 1050/350 K
ENGEL ES 1050/350 K Formsprutningsmaskin
Enjeksiyon kalıplama makinesi ENGEL ES 1050/350 K
Romania
Hungary
Bulgaria
EN
- Languages
English (GB)