Contact us to receive an offer.
| Manufacturer | Doosan |
|---|---|
| Model | Puma 400LB |
| Year | 2015 |
| Location | United Kingdom
|
This listing features a Doosan Puma 400LB CNC lathe, manufactured in 2015, designed for precision and heavy-duty turning applications. The machine has a substantial footprint with dimensions of 6642 mm in length, 2440 mm in width, and 2060 mm in height, and it weighs approximately 11,000 kg. It offers a maximum turning length of 2093 mm and a maximum cutting diameter of 550 mm, with a swing of 700 mm over the bed and 590 mm over the transversing slide. The lathe is equipped with a 10-station turret capable of holding tools sized 32 x 32 mm, allowing for versatile machining operations. Its spindle speed reaches up to 2000 rpm, driven by a powerful 26 kW sub spindle motor with a gearbox, and it features an A2-11 spindle nose. The tailstock is equipped with an MT#6 taper. Rapid feed rates for the X and Z axes are 16 and 18 m/min respectively, supporting efficient machining cycles.
The machine includes a 3-jaw chuck with a diameter of 381 mm and a bar capacity of 117 mm. It is controlled via a FANUC 32i control system, known for its reliability and precision. Additional features include coolant system, gearbox, interlocked guards for safety, a tool setter, and a swarf conveyor to manage chips during operation.
From the images, the lathe appears clean and well-maintained, with no visible damage to the exterior or interior. The control panel with display and buttons is mounted on the front center of the machine, and a chip conveyor or coolant system is attached to the right side. The turret tool holder shows multiple tool positions with a large drill bit attached, and the interior metal surfaces, while showing some wear, remain clean. Electrical cables and some tools are visible near the machine base. Overall, this Doosan Puma 400LB CNC lathe presents a robust and versatile solution for demanding turning tasks in an industrial setting.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
3 Jaw Chuck, Coolant, Gearbox, Interlocked guards, Low Volt Light, Swarf Conveyor, Tailstock, Tool setter
Bar Capacity
117mm
Chuck Size
381mm
Control
FANUC 32i control
Machine Dimensions
6642 x 2440 x 2060mm
Machine Weight
11000kg
Maximum Cutting Diameter
550mm
Maximum Cutting Length
2093mm
Rapid Feedrates
X x Z: 16 x 18m/minute
Spindle Nose
A2-11
Spindle Speed
2000rpm
Sub Spindle Motor Power
26kW (Gearbox)
Swing
700mm
Swing Over Carriage
590mm
Tailstock Taper
MT#6
Tool Size
32 x 32mm
Turret Positions
10 station
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Machinery dealer |
| Active since | 2009 |
| Offers online | 178 |
| Last activity | Oct. 31, 2026 |
3 Jaw Chuck, Coolant, Gearbox, Interlocked guards, Low Volt Light, Swarf Conveyor, Tailstock, Tool setter
Bar Capacity
117mm
Chuck Size
381mm
Control
FANUC 32i control
Machine Dimensions
6642 x 2440 x 2060mm
Machine Weight
11000kg
Maximum Cutting Diameter
550mm
Maximum Cutting Length
2093mm
Rapid Feedrates
X x Z: 16 x 18m/minute
Spindle Nose
A2-11
Spindle Speed
2000rpm
Sub Spindle Motor Power
26kW (Gearbox)
Swing
700mm
Swing Over Carriage
590mm
Tailstock Taper
MT#6
Tool Size
32 x 32mm
Turret Positions
10 station
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
This listing features a Doosan Puma 400LB CNC lathe, manufactured in 2015, designed for precision and heavy-duty turning applications. The machine has a substantial footprint with dimensions of 6642 mm in length, 2440 mm in width, and 2060 mm in height, and it weighs approximately 11,000 kg. It offers a maximum turning length of 2093 mm and a maximum cutting diameter of 550 mm, with a swing of 700 mm over the bed and 590 mm over the transversing slide. The lathe is equipped with a 10-station turret capable of holding tools sized 32 x 32 mm, allowing for versatile machining operations. Its spindle speed reaches up to 2000 rpm, driven by a powerful 26 kW sub spindle motor with a gearbox, and it features an A2-11 spindle nose. The tailstock is equipped with an MT#6 taper. Rapid feed rates for the X and Z axes are 16 and 18 m/min respectively, supporting efficient machining cycles.
The machine includes a 3-jaw chuck with a diameter of 381 mm and a bar capacity of 117 mm. It is controlled via a FANUC 32i control system, known for its reliability and precision. Additional features include coolant system, gearbox, interlocked guards for safety, a tool setter, and a swarf conveyor to manage chips during operation.
From the images, the lathe appears clean and well-maintained, with no visible damage to the exterior or interior. The control panel with display and buttons is mounted on the front center of the machine, and a chip conveyor or coolant system is attached to the right side. The turret tool holder shows multiple tool positions with a large drill bit attached, and the interior metal surfaces, while showing some wear, remain clean. Electrical cables and some tools are visible near the machine base. Overall, this Doosan Puma 400LB CNC lathe presents a robust and versatile solution for demanding turning tasks in an industrial setting.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2009 |
| Offers online | 178 |
| Last activity | Oct. 31, 2026 |
cnc струг Doosan Puma 400LB
Soustruh cnc Doosan Puma 400LB
Doosan Puma 400LB cnc drejebænk
Doosan Puma 400LB Drehmaschine CNC
cnc τόρνος Doosan Puma 400LB
Doosan Puma 400LB cnc lathe
Torno cnc Doosan Puma 400LB
Tour cnc Doosan Puma 400LB
cnc tokarski stroj Doosan Puma 400LB
Doosan Puma 400LB cnc eszterga
Tornio cnc Doosan Puma 400LB
cnc tekinimo staklės Doosan Puma 400LB
Doosan Puma 400LB cnc-draaibank
Tokarka CNC Doosan Puma 400LB
Torno CNC Doosan Puma 400LB
strung cnc Doosan Puma 400LB
Doosan Puma 400LB Токарный станок с ЧПУ
cnc strug Doosan Puma 400LB
Doosan Puma 400LB cnc svarv
Cnc torna Doosan Puma 400LB
EN
- Languages
English (GB)