Contact us to receive an offer.
| Manufacturer | DOOSAN |
|---|---|
| Model | PUMA 2000 LSY |
| Year | 2006 |
| Location | Switzerland
|
The Doosan PUMA 2000 LSY is a CNC lathe designed for precision turning operations, measuring 3118 mm in length, 1705 mm in width, and 2060 mm in height, with a machine weight of approximately 4850 kg. This model features a single turret equipped with 12 tool positions, allowing for versatile tooling options. The turret supports tool shanks with a cross-section of 25 mm and offers an indexing time of 0.1 seconds, facilitating efficient tool changes.
The lathe's turning capabilities include a maximum turning diameter of 330 mm and a swing diameter over the bed of 600 mm. It supports a maximum turning length of up to 760 mm and accommodates bar diameters up to 65 mm. The machine's axes provide a longitudinal travel (Z-axis) of 830 mm and a transversal stroke (X-axis) of 250 mm, with an additional transversal travel (Y-axis) of ±50 mm.
Powering the spindle is an 11 kW motor, with spindle speeds reaching up to 6000 rpm. The main spindle features a spindle nose A2#6 and an internal spindle diameter of 76 mm, while the back spindle also has an A2#6 nose and a maximum speed of 6000 rpm. Both spindles support C-axis control with a resolution of 0.001°.
The machine offers rapid traverse rates of 20 m/min on the X-axis, 24 m/min on the Z-axis, and 7.5 m/min on the Y-axis. It operates on a 3-phase 400 Volt, 50 Hz power supply, requiring a total power input of 46.1 kVA.
The PUMA 2000 LSY comes equipped with several accessories including a lamp, parts catcher, chip conveyor, and two yellow foot pedals for operational control.
The lathe features a control panel with a screen displaying coordinates and program details, along with various buttons and knobs for machine operation. The machining area is enclosed, providing safety and cleanliness, and contains a chuck, turret with multiple tool holders, spindle, and tailstock. The machining chamber shows some signs of use with minor wear marks on metal surfaces but no visible damage. The exterior of the machine is generally clean and intact, with minor wear consistent with normal use. The chuck and tool holders also show signs of use but no visible damage or rust.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Technical data
Number of spindles 2
Number of revolvers 1
Swing diameter 550 mm
Swing diameter over bed 600 mm
Max. turning diameter 330 mm
Maximum turning length 510 / 760 mm
Max. bar diameter 65 mm
Turret carriage:
Travels:
Longitudinal travel (Z-axis) 580 / 830 mm
Transversal strocke (X axis) 250 mm
Transversal travel (y-axis) 100 (+/-50 mm
Turret slide:
Number of positions 12
Tool shank cross section 25 mm
Indexing time 0.1 sec
Main spindle:
Spindle nose A2#6
Internal spindle diameter 76 mm
C axis (spindle,resolution) 0.001 °
Spindle speeds:
number (steps)
from 0 rpm
up to 4500 rpm
Spindle power 15 / 11 kW
Back spindle:
Spindle nose A2#6
max. speed 6000 rpm
Internal spindle diameter 45 mm
Spindle diameter 80 mm
C axis (spindle,resolution) 0.001 °
Power of back spindle 7.5 / 5.5 kW
Rapid traverse X 20 m/min
Rapid traverse Z 24 m/min
Rapid traverse Y 7.5 m/min
Voltage 50 Hz 3x 400 Volt
Total power required 46.1 kVA
Machine's weight about 4850 kg
Overall dimensions machine:
Length 3118 mm
Width 1705 mm
Height 2060 mm
Various accessories:
Lamp
Parts catcher
Chip conveyor
Foot pedal
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Machinery dealer |
| Active since | 2014 |
| Offers online | 258 |
| Last activity | Nov. 5, 2026 |
Technical data
Number of spindles 2
Number of revolvers 1
Swing diameter 550 mm
Swing diameter over bed 600 mm
Max. turning diameter 330 mm
Maximum turning length 510 / 760 mm
Max. bar diameter 65 mm
Turret carriage:
Travels:
Longitudinal travel (Z-axis) 580 / 830 mm
Transversal strocke (X axis) 250 mm
Transversal travel (y-axis) 100 (+/-50 mm
Turret slide:
Number of positions 12
Tool shank cross section 25 mm
Indexing time 0.1 sec
Main spindle:
Spindle nose A2#6
Internal spindle diameter 76 mm
C axis (spindle,resolution) 0.001 °
Spindle speeds:
number (steps)
from 0 rpm
up to 4500 rpm
Spindle power 15 / 11 kW
Back spindle:
Spindle nose A2#6
max. speed 6000 rpm
Internal spindle diameter 45 mm
Spindle diameter 80 mm
C axis (spindle,resolution) 0.001 °
Power of back spindle 7.5 / 5.5 kW
Rapid traverse X 20 m/min
Rapid traverse Z 24 m/min
Rapid traverse Y 7.5 m/min
Voltage 50 Hz 3x 400 Volt
Total power required 46.1 kVA
Machine's weight about 4850 kg
Overall dimensions machine:
Length 3118 mm
Width 1705 mm
Height 2060 mm
Various accessories:
Lamp
Parts catcher
Chip conveyor
Foot pedal
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
The Doosan PUMA 2000 LSY is a CNC lathe designed for precision turning operations, measuring 3118 mm in length, 1705 mm in width, and 2060 mm in height, with a machine weight of approximately 4850 kg. This model features a single turret equipped with 12 tool positions, allowing for versatile tooling options. The turret supports tool shanks with a cross-section of 25 mm and offers an indexing time of 0.1 seconds, facilitating efficient tool changes.
The lathe's turning capabilities include a maximum turning diameter of 330 mm and a swing diameter over the bed of 600 mm. It supports a maximum turning length of up to 760 mm and accommodates bar diameters up to 65 mm. The machine's axes provide a longitudinal travel (Z-axis) of 830 mm and a transversal stroke (X-axis) of 250 mm, with an additional transversal travel (Y-axis) of ±50 mm.
Powering the spindle is an 11 kW motor, with spindle speeds reaching up to 6000 rpm. The main spindle features a spindle nose A2#6 and an internal spindle diameter of 76 mm, while the back spindle also has an A2#6 nose and a maximum speed of 6000 rpm. Both spindles support C-axis control with a resolution of 0.001°.
The machine offers rapid traverse rates of 20 m/min on the X-axis, 24 m/min on the Z-axis, and 7.5 m/min on the Y-axis. It operates on a 3-phase 400 Volt, 50 Hz power supply, requiring a total power input of 46.1 kVA.
The PUMA 2000 LSY comes equipped with several accessories including a lamp, parts catcher, chip conveyor, and two yellow foot pedals for operational control.
The lathe features a control panel with a screen displaying coordinates and program details, along with various buttons and knobs for machine operation. The machining area is enclosed, providing safety and cleanliness, and contains a chuck, turret with multiple tool holders, spindle, and tailstock. The machining chamber shows some signs of use with minor wear marks on metal surfaces but no visible damage. The exterior of the machine is generally clean and intact, with minor wear consistent with normal use. The chuck and tool holders also show signs of use but no visible damage or rust.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2014 |
| Offers online | 258 |
| Last activity | Nov. 5, 2026 |
cnc струг DOOSAN PUMA 2000 LSY
Soustruh cnc DOOSAN PUMA 2000 LSY
DOOSAN PUMA 2000 LSY cnc drejebænk
DOOSAN PUMA 2000 LSY Drehmaschine CNC
cnc τόρνος DOOSAN PUMA 2000 LSY
DOOSAN PUMA 2000 LSY cnc lathe
Torno cnc DOOSAN PUMA 2000 LSY
Tour cnc DOOSAN PUMA 2000 LSY
cnc tokarski stroj DOOSAN PUMA 2000 LSY
DOOSAN PUMA 2000 LSY cnc eszterga
Tornio cnc DOOSAN PUMA 2000 LSY
cnc tekinimo staklės DOOSAN PUMA 2000 LSY
DOOSAN PUMA 2000 LSY cnc-draaibank
Tokarka CNC DOOSAN PUMA 2000 LSY
Torno CNC DOOSAN PUMA 2000 LSY
strung cnc DOOSAN PUMA 2000 LSY
DOOSAN PUMA 2000 LSY Токарный станок с ЧПУ
cnc strug DOOSAN PUMA 2000 LSY
DOOSAN PUMA 2000 LSY cnc svarv
Cnc torna DOOSAN PUMA 2000 LSY
EN
- Languages
English (GB)