Contact us to receive an offer.
| Manufacturer | DOOSAN |
|---|---|
| Model | LYNX 220 LMA |
| Year | 2008 |
| Location | Italy
|
This listing features a DOOSAN Lynx 220 LMA CNC motorized horizontal lathe, manufactured in 2008. The machine complies with CE standards and is equipped with a FANUC 0i-TD numerical control system featuring a 10.4-inch display. It offers a maximum turning diameter of 250 mm and a maximum rotating diameter above the bed of 510 mm, with a turning length capacity of 510 mm. The spindle bore diameter is 65 mm, allowing for bar stock up to 51 mm to pass through.
The lathe is powered by a 15 kW spindle motor, capable of reaching speeds up to 6000 rpm. It includes a single turret with 12 motorized tool stations, all of which are rotating tools, providing versatility in machining operations. Rapid movements in the X and Z axes are rated at 30 m/min each. The tailstock features a Morse taper MT4 with a 120 mm quill travel.
Machine dimensions are 4000 mm in length, 1600 mm in width, and 1650 mm in height, with a total weight of 3500 kg. Included accessories are a self-centering chuck with a diameter of 175 mm, a chip conveyor for efficient removal of swarf, a tool presetter to facilitate tool setup, a workpiece pickup arm, a workpiece discharge mat, a tailstock, and an LNS bar feeder. Documentation includes manuals and a CE declaration.
The machine is housed within a safety enclosure door, and a control panel is mounted on the right side, featuring multiple buttons, an emergency stop, and a screen for operational control. A signal tower light is installed on top of the machine for status indication. Hydraulic or pneumatic pressure gauges are located on the left side of the enclosure door. The lathe shows signs of use with some wear and dirt visible inside the enclosure, consistent with a used but operational condition.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
CNC motorized horizontal lathe with CE standards used
with FANUC 0i-TD (10.4") numerical control
MACHINE INSTALLATION: month/year 03/2008
MACHINE ACCESSORIES:
- C-axis
- Self-centering chuck diam. 175 mm (spindle bore 65 mm)
- Chip conveyor
- Tool presetter
- Workpiece pickup arm
- Workpiece discharge mat
- Tailstock
- LNS bar feeder
- Manuals and CE declaration
Max Rotating Diam: 510 mm
Max Turning Diam: 250 mm
Max Turning Length: 510 mm
Bar Passage: 51 mm
Spindle Nose Connection: ASA 5"
Rotation Speed: 6000 min-1
Spindle Power: 15 kW
Rapid X Z Movements: 30/30 m/min
Tailstock taper: MT4 / 120 mm
Turret Stations: 12 nr
Motorized Turret Stations: 12 nr
Machine Dimensions: 4000x1600xH1650 mm
Machine Weight: 3500 Kg
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Machinery dealer |
| Active since | 2017 |
| Offers online | 33 |
| Last activity | Nov. 13, 2026 |
CNC motorized horizontal lathe with CE standards used
with FANUC 0i-TD (10.4") numerical control
MACHINE INSTALLATION: month/year 03/2008
MACHINE ACCESSORIES:
- C-axis
- Self-centering chuck diam. 175 mm (spindle bore 65 mm)
- Chip conveyor
- Tool presetter
- Workpiece pickup arm
- Workpiece discharge mat
- Tailstock
- LNS bar feeder
- Manuals and CE declaration
Max Rotating Diam: 510 mm
Max Turning Diam: 250 mm
Max Turning Length: 510 mm
Bar Passage: 51 mm
Spindle Nose Connection: ASA 5"
Rotation Speed: 6000 min-1
Spindle Power: 15 kW
Rapid X Z Movements: 30/30 m/min
Tailstock taper: MT4 / 120 mm
Turret Stations: 12 nr
Motorized Turret Stations: 12 nr
Machine Dimensions: 4000x1600xH1650 mm
Machine Weight: 3500 Kg
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
This listing features a DOOSAN Lynx 220 LMA CNC motorized horizontal lathe, manufactured in 2008. The machine complies with CE standards and is equipped with a FANUC 0i-TD numerical control system featuring a 10.4-inch display. It offers a maximum turning diameter of 250 mm and a maximum rotating diameter above the bed of 510 mm, with a turning length capacity of 510 mm. The spindle bore diameter is 65 mm, allowing for bar stock up to 51 mm to pass through.
The lathe is powered by a 15 kW spindle motor, capable of reaching speeds up to 6000 rpm. It includes a single turret with 12 motorized tool stations, all of which are rotating tools, providing versatility in machining operations. Rapid movements in the X and Z axes are rated at 30 m/min each. The tailstock features a Morse taper MT4 with a 120 mm quill travel.
Machine dimensions are 4000 mm in length, 1600 mm in width, and 1650 mm in height, with a total weight of 3500 kg. Included accessories are a self-centering chuck with a diameter of 175 mm, a chip conveyor for efficient removal of swarf, a tool presetter to facilitate tool setup, a workpiece pickup arm, a workpiece discharge mat, a tailstock, and an LNS bar feeder. Documentation includes manuals and a CE declaration.
The machine is housed within a safety enclosure door, and a control panel is mounted on the right side, featuring multiple buttons, an emergency stop, and a screen for operational control. A signal tower light is installed on top of the machine for status indication. Hydraulic or pneumatic pressure gauges are located on the left side of the enclosure door. The lathe shows signs of use with some wear and dirt visible inside the enclosure, consistent with a used but operational condition.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2017 |
| Offers online | 33 |
| Last activity | Nov. 13, 2026 |
cnc струг DOOSAN LYNX 220 LMA
Soustruh cnc DOOSAN LYNX 220 LMA
DOOSAN LYNX 220 LMA cnc drejebænk
DOOSAN LYNX 220 LMA Drehmaschine CNC
cnc τόρνος DOOSAN LYNX 220 LMA
DOOSAN LYNX 220 LMA cnc lathe
Torno cnc DOOSAN LYNX 220 LMA
Tour cnc DOOSAN LYNX 220 LMA
cnc tokarski stroj DOOSAN LYNX 220 LMA
DOOSAN LYNX 220 LMA cnc eszterga
Tornio cnc DOOSAN LYNX 220 LMA
cnc tekinimo staklės DOOSAN LYNX 220 LMA
DOOSAN LYNX 220 LMA cnc-draaibank
Tokarka CNC DOOSAN LYNX 220 LMA
Torno CNC DOOSAN LYNX 220 LMA
strung cnc DOOSAN LYNX 220 LMA
DOOSAN LYNX 220 LMA Токарный станок с ЧПУ
cnc strug DOOSAN LYNX 220 LMA
DOOSAN LYNX 220 LMA cnc svarv
Cnc torna DOOSAN LYNX 220 LMA
EN
- Languages
English (GB)