| Manufacturer | DMG MORI |
|---|---|
| Model | NZX 2000/800SY |
| Year | 2016 |
| Location | Denmark
|
Machine overview:
This listing is for a DMG MORI NZX 2000/800SY horizontal turning center, 6-axis configuration, manufactured in 2016. The machine is equipped with dual turrets (2 turrets, 16 stations each = 32 tool stations total) and a FANUC F31iB control with CELOS.
Key specifications and capacities:
- Maximum turning diameter: 320 mm
- Swing over bed / swing over cross slide: 800 mm
- Maximum distance between spindle noses: 1,130 mm
- Spindle speed: 5,000 RPM
- Number of axes: 6
- X-axis travel: 210 mm
- Y-axis travel: 110 mm
- Z-axis travel: 810 mm
- Tool offsets: 200 sets
- Additional workpiece coordinate sets: 48
- Tool stations: 32
- Control memory: 1 mB storage
Electrical / interfaces:
- Main electronic connection: Transformer 95 kVA
- Ethernet interface
- Robot interface
- Barfeeder interface
- 10 external M codes
Included features, options and accessories (as stated):
- Chip conveyor
- 4 x angled live tools (to follow)
- 6 x straight live tool holders (to follow)
- 2 x angled C4 Capto live tool holders (to follow)
- 10 x Capto fixed tool holders (to follow)
- Counter spindle (yes)
- Driven tools (yes)
- Chuck high/low pressure on both spindles
- Spindle 2 tailstock specification
- 7 MPa high-pressure Knoll coolant system
- Coolant gun and coolant float switch
- Chuck-top coolant for both spindles
- Airblow for tool tips on both turrets and airblow for chuck on spindle 1
- Oil skimmer
- Autodoor
- Safety fence (interface)
- Handwheel
- Spindle orientation on both spindles
- Text engraving function
- High-speed canned cycle and program restart
- Island open pockets
Condition and usage notes (as stated):
- Reported as well maintained
- Reported to have been used only for stainless steel from new
Notes:
All information is taken from the provided product details. If you need verification of operational condition, running hours, or additional photos and documentation, please request them from the seller.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
This 6-axis DMG MORI NZX 2000/800SY was manufactured in 2016. It features a maximum turning diameter of 320 mm and a swing over bed of 800 mm. The machine is equipped with dual turrets, each with 16 stations, and offers high-speed canned cycle capabilities. If you are looking to get high-quality turning capabilities, consider the DMG MORI NZX 2000/800SY horizontal turning machine we have for sale. Contact us for further details.Number of turrets: 2
Number of tool slots: 2 x 16 stations
Main electronic connection: Transformer 95 kVA
Chip conveyor: Yes
4 x angel live tools will follow
6 x straight live tool holder will follow
2 x angel C4 Capto live tool holder will follow
10 x capto fix tool holders will follow
Possible to buy also robot solution
Well maintained
Only running stainless steel since day one
Chuch high/low pressure both spindles
Spindle 2 tailstock spec
7 MPa high pressure Knoll system
Coolant gun
Coolant float switch
Chuck top coolant both spindles
Airblow for tool tip both turrets
Airblow for chuck spindle 1
Oil skimmer
Autodoor
Robot IF
Ethernet IF
Safety fence IF
Barfeeder IF
10 external M codes
Handwheel
Spindle orientation both spindles
Text engraving function
High Speed canned cycle
Program restart
Island open pockets
1 mB storage
Additional workpiece coordinate 48 sets
Tool offsets 200 sets
Swing over bed = 800 mm
Swing over cross slide 800 mm
Maximum distance between nose 1130 mm
Max turning diameter 320 mm
Control Brand: FANUC
Control Model: F31iB with Celos
Counter Spindle: yes
Driven Tools: yes
Number of Axes: 6
Tool Stations: 32
Spindle Speed: 5000 RPM
X-axis Travel: 210 mm
Y-axis Travel: 110 mm
Z-axis Travel: 810 mm
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Machinery dealer |
| Active since | 2019 |
| Offers online | 2045 |
| Last activity | Oct. 31, 2026 |
GINDUMAC GmbH is a dynamic German company specializing in the global trade of used industrial machinery. Our international team of more than 30 employees supports manufacturers worldwide in buying and selling high-quality used equipment across sectors such as metalworking, sheet metal, plastics, woodworking, and automation.
Through a data-driven, digital approach, the company delivers accurate machine valuations, professional inspections, and end-to-end transaction management — ensuring a transparent, secure, and efficient sales process for both buyers and sellers.
This 6-axis DMG MORI NZX 2000/800SY was manufactured in 2016. It features a maximum turning diameter of 320 mm and a swing over bed of 800 mm. The machine is equipped with dual turrets, each with 16 stations, and offers high-speed canned cycle capabilities. If you are looking to get high-quality turning capabilities, consider the DMG MORI NZX 2000/800SY horizontal turning machine we have for sale. Contact us for further details.Number of turrets: 2
Number of tool slots: 2 x 16 stations
Main electronic connection: Transformer 95 kVA
Chip conveyor: Yes
4 x angel live tools will follow
6 x straight live tool holder will follow
2 x angel C4 Capto live tool holder will follow
10 x capto fix tool holders will follow
Possible to buy also robot solution
Well maintained
Only running stainless steel since day one
Chuch high/low pressure both spindles
Spindle 2 tailstock spec
7 MPa high pressure Knoll system
Coolant gun
Coolant float switch
Chuck top coolant both spindles
Airblow for tool tip both turrets
Airblow for chuck spindle 1
Oil skimmer
Autodoor
Robot IF
Ethernet IF
Safety fence IF
Barfeeder IF
10 external M codes
Handwheel
Spindle orientation both spindles
Text engraving function
High Speed canned cycle
Program restart
Island open pockets
1 mB storage
Additional workpiece coordinate 48 sets
Tool offsets 200 sets
Swing over bed = 800 mm
Swing over cross slide 800 mm
Maximum distance between nose 1130 mm
Max turning diameter 320 mm
Control Brand: FANUC
Control Model: F31iB with Celos
Counter Spindle: yes
Driven Tools: yes
Number of Axes: 6
Tool Stations: 32
Spindle Speed: 5000 RPM
X-axis Travel: 210 mm
Y-axis Travel: 110 mm
Z-axis Travel: 810 mm
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
Machine overview:
This listing is for a DMG MORI NZX 2000/800SY horizontal turning center, 6-axis configuration, manufactured in 2016. The machine is equipped with dual turrets (2 turrets, 16 stations each = 32 tool stations total) and a FANUC F31iB control with CELOS.
Key specifications and capacities:
- Maximum turning diameter: 320 mm
- Swing over bed / swing over cross slide: 800 mm
- Maximum distance between spindle noses: 1,130 mm
- Spindle speed: 5,000 RPM
- Number of axes: 6
- X-axis travel: 210 mm
- Y-axis travel: 110 mm
- Z-axis travel: 810 mm
- Tool offsets: 200 sets
- Additional workpiece coordinate sets: 48
- Tool stations: 32
- Control memory: 1 mB storage
Electrical / interfaces:
- Main electronic connection: Transformer 95 kVA
- Ethernet interface
- Robot interface
- Barfeeder interface
- 10 external M codes
Included features, options and accessories (as stated):
- Chip conveyor
- 4 x angled live tools (to follow)
- 6 x straight live tool holders (to follow)
- 2 x angled C4 Capto live tool holders (to follow)
- 10 x Capto fixed tool holders (to follow)
- Counter spindle (yes)
- Driven tools (yes)
- Chuck high/low pressure on both spindles
- Spindle 2 tailstock specification
- 7 MPa high-pressure Knoll coolant system
- Coolant gun and coolant float switch
- Chuck-top coolant for both spindles
- Airblow for tool tips on both turrets and airblow for chuck on spindle 1
- Oil skimmer
- Autodoor
- Safety fence (interface)
- Handwheel
- Spindle orientation on both spindles
- Text engraving function
- High-speed canned cycle and program restart
- Island open pockets
Condition and usage notes (as stated):
- Reported as well maintained
- Reported to have been used only for stainless steel from new
Notes:
All information is taken from the provided product details. If you need verification of operational condition, running hours, or additional photos and documentation, please request them from the seller.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2019 |
| Offers online | 2045 |
| Last activity | Oct. 31, 2026 |
GINDUMAC GmbH is a dynamic German company specializing in the global trade of used industrial machinery. Our international team of more than 30 employees supports manufacturers worldwide in buying and selling high-quality used equipment across sectors such as metalworking, sheet metal, plastics, woodworking, and automation.
Through a data-driven, digital approach, the company delivers accurate machine valuations, professional inspections, and end-to-end transaction management — ensuring a transparent, secure, and efficient sales process for both buyers and sellers.
CNC струг DMG MORI NZX 2000/800SY
CNC soustruh DMG MORI NZX 2000/800SY
DMG MORI NZX 2000/800SY CNC-drejebænk
DMG MORI NZX 2000/800SY CNC-Drehmaschine
Τόρνος CNC DMG MORI NZX 2000/800SY
DMG MORI NZX 2000/800SY CNC lathe
Torno CNC DMG MORI NZX 2000/800SY
Tour CNC DMG MORI NZX 2000/800SY
CNC tokarski stroj DMG MORI NZX 2000/800SY
DMG MORI NZX 2000/800SY CNC esztergagép
Tornio CNC DMG MORI NZX 2000/800SY
DMG MORI NZX 2000/800SY CNC tekinimo staklės
DMG MORI NZX 2000/800SY CNC-draaibank
Tokarka CNC DMG MORI NZX 2000/800SY
Torno CNC DMG MORI NZX 2000/800SY
Strung CNC DMG MORI NZX 2000/800SY
DMG MORI NZX 2000/800SY Токарный станок с ЧПУ
CNC strug DMG MORI NZX 2000/800SY
DMG MORI NZX 2000/800SY CNC-svarv
CNC torna DMG MORI NZX 2000/800SY
EN
- Languages
English (GB)