Contact us to receive an offer.
| Manufacturer | DEMAG |
|---|---|
| Model | EXTRA 100 - 430 |
| Year | 2005 |
| Location | Italy
|
DEMAG EXTRA 100 - 430 plastic injection moulding machine, manufactured in 2005. The machine is described as having radial and air-blow features, together with a RoboI interface. It has a turquoise casing and a black base. The mould area is enclosed by a transparent safety guard, and the machine is fitted with a control panel featuring a display, keypad and function buttons. An emergency-stop button is located below the operator panel.
A hopper is mounted above the injection unit. The barrel assembly and a horizontal rod are visible at the side, with hoses and cables routed along and beneath the machine. The machine is shown assembled, with used-condition surface marks on visible panels and components; no obvious major external damage is apparent in the views provided.
Please note that the operator display shows the message “Pompa non funzionante,” meaning “pump not functioning.” This indicates a reported pump issue and should be taken into account when assessing the machine’s condition. The exterior appearance alone does not establish operational status. The display also identifies the machine as “Ergotech 100/400 - 430 h,” while the casing reads “Extra 100-430.”
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Plastic injection molding machine in excellent condition, radial, air-blow, with RoboI interface
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Factory – small or medium company |
| Active since | 2017 |
| Offers online | 2 |
| Last activity | Nov. 2, 2026 |
Plastic injection molding machine in excellent condition, radial, air-blow, with RoboI interface
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
DEMAG EXTRA 100 - 430 plastic injection moulding machine, manufactured in 2005. The machine is described as having radial and air-blow features, together with a RoboI interface. It has a turquoise casing and a black base. The mould area is enclosed by a transparent safety guard, and the machine is fitted with a control panel featuring a display, keypad and function buttons. An emergency-stop button is located below the operator panel.
A hopper is mounted above the injection unit. The barrel assembly and a horizontal rod are visible at the side, with hoses and cables routed along and beneath the machine. The machine is shown assembled, with used-condition surface marks on visible panels and components; no obvious major external damage is apparent in the views provided.
Please note that the operator display shows the message “Pompa non funzionante,” meaning “pump not functioning.” This indicates a reported pump issue and should be taken into account when assessing the machine’s condition. The exterior appearance alone does not establish operational status. The display also identifies the machine as “Ergotech 100/400 - 430 h,” while the casing reads “Extra 100-430.”
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Factory – small or medium company |
| Active since | 2017 |
| Offers online | 2 |
| Last activity | Nov. 2, 2026 |
Germany
2007
| Robot interface |
|---|
| Mould size |
|---|
| Clamping force | 250 T |
|---|---|
| Tie bar spacing (H) | 685 mm |
| Shot weight | 679 g |
| Platen length | 1005 mm |
| Bi-metal screw | No |
| Robot interface | |
| Number of heating zones | 6 |
| Mould size | 280-700 |
| Screw diameter | 60 mm |
|---|---|
| Tie bar spacing (V) | 735 mm |
| Pressure on material | 998 bar |
| Platen width | 950 mm |
| Equipped with robot | No |
| Number of cores | 4 |
| Opening of the press | 550 mm |
Czech Republic
2005
| Clamping force | 160 T |
|---|---|
| Tie bar spacing (H) | 520 mm |
| Pressure on material | 1600 bar |
| Robot interface |
| Screw diameter | 45 mm |
|---|---|
| Tie bar spacing (V) | 520 mm |
| Equipped with robot | Yes |
| Mould size |
| Clamping force | 50 T |
|---|---|
| Tie bar spacing (H) | 360 mm |
| Mould size |
| Screw diameter | 18 mm |
|---|---|
| Robot interface |
| Clamping force | 120 T |
|---|---|
| Tie bar spacing (H) | 470 mm |
| Shot volume | 231 cm³ |
| Robot interface |
| Screw diameter | 40 mm |
|---|---|
| Tie bar spacing (V) | 470 mm |
| Pressure on material | 2025 bar |
| Mould size |
| Clamping force | 210 T |
|---|---|
| Tie bar spacing (H) | 580 mm |
| Robot interface |
| Screw diameter | 50 mm |
|---|---|
| Tie bar spacing (V) | 580 mm |
| Mould size |
| Clamping force | 100 T |
|---|---|
| Tie bar spacing (H) | 470 mm |
| Robot interface |
| Screw diameter | 30 mm |
|---|---|
| Equipped with robot | Yes |
| Mould size |
| Clamping force | 160 T |
|---|---|
| Tie bar spacing (V) | 520 mm |
| Robot interface | |
| Mould size |
| Screw diameter | 50 mm |
|---|---|
| Shot weight | 313 g |
| Opening of the press | 500 mm |
| Clamping force | 150 T |
|---|---|
| Tie bar spacing (H) | 500 mm |
| Shot volume | 399 cm³ |
| Pressure on material | 1598 bar |
| Platen width | 750 mm |
| Robot interface | |
| Opening of the press | 850 mm |
| Screw diameter | 45 mm |
|---|---|
| Tie bar spacing (V) | 500 mm |
| Shot weight | 260 g |
| Platen length | 750 mm |
| Equipped with robot | No |
| Number of cores | 2 |
| Mould size | 250 |
Czech Republic
2006
| Clamping force | 420 T |
|---|---|
| Tie bar spacing (H) | 800 mm |
| Shot volume | 891 cm³ |
| Pressure on material | 2420 bar |
| Platen width | 1100 mm |
| Mould size |
| Screw diameter | 60 mm |
|---|---|
| Tie bar spacing (V) | 710 mm |
| Shot weight | 800 g |
| Platen length | 1200 mm |
| Robot interface |
| Clamping force | 200 T |
|---|---|
| Tie bar spacing (H) | 560 mm |
| Shot volume | 442 cm³ |
| Platen length | 830 mm |
| Bi-metal screw | Yes |
| Robot interface | |
| Opening of the press | 575 mm |
| Screw diameter | 50 mm |
|---|---|
| Tie bar spacing (V) | 560 mm |
| Pressure on material | 1940 bar |
| Platen width | 830 mm |
| Equipped with robot | No |
| Number of cores | 2 |
| Mould size |
| Clamping force | 350 T |
|---|---|
| Tie bar spacing (H) | 810 mm |
| Shot volume | 1212 cm³ |
| Pressure on material | 1877 bar |
| Platen width | 1100 mm |
| Equipped with robot | Yes |
| Number of cores | 2 |
| Mould size | 380 |
| Screw diameter | 70 mm |
|---|---|
| Tie bar spacing (V) | 710 mm |
| Shot weight | 1090 g |
| Platen length | 1200 mm |
| Bi-metal screw | No |
| Robot interface | Euromap E 67 |
| Opening of the press | 710 mm |
| Clamping force | 420 T |
|---|---|
| Tie bar spacing (H) | 820 mm |
| Shot volume | 1212 cm³ |
| Platen length | 1200 mm |
| Bi-metal screw | Yes |
| Robot interface | |
| Opening of the press | 825 mm |
| Screw diameter | 70 mm |
|---|---|
| Tie bar spacing (V) | 820 mm |
| Pressure on material | 1877 bar |
| Platen width | 1200 mm |
| Equipped with robot | No |
| Number of cores | 1 |
| Mould size | 770 |
| Clamping force | 420 T |
|---|---|
| Tie bar spacing (H) | 810 mm |
| Shot volume | 763 cm³ |
| Bi-metal screw | Yes |
| Robot interface | |
| Opening of the press | 710 mm |
| Screw diameter | 60 mm |
|---|---|
| Tie bar spacing (V) | 710 mm |
| Pressure on material | 1905 bar |
| Equipped with robot | No |
| Number of cores | 2 |
| Mould size | 380/820 mm |
| Clamping force | 420 T |
|---|---|
| Tie bar spacing (H) | 800 mm |
| Shot volume | 763 cm³ |
| Bi-metal screw | Yes |
| Robot interface | |
| Opening of the press | 710 mm |
| Screw diameter | 60 mm |
|---|---|
| Tie bar spacing (V) | 710 mm |
| Pressure on material | 1905 bar |
| Equipped with robot | No |
| Number of cores | 2 |
| Mould size |
| Clamping force | 200 T |
|---|---|
| Tie bar spacing (H) | 560 mm |
| Shot volume | 442 cm³ |
| Robot interface |
| Screw diameter | 50 mm |
|---|---|
| Tie bar spacing (V) | 560 mm |
| Pressure on material | 1946 bar |
| Mould size |
| Clamping force | 330 T |
|---|---|
| Tie bar spacing (H) | 710 mm |
| Shot volume | 763 cm³ |
| Pressure on material | 1905 bar |
| Platen width | 950 mm |
| Robot interface | |
| Number of heating zones | 3 |
| Mould size | 330/710 mm |
| Screw diameter | 60 mm |
|---|---|
| Tie bar spacing (V) | 630 mm |
| Shot weight | g |
| Platen length | 1040 mm |
| Bi-metal screw | No |
| Number of cores | 3 |
| Opening of the press | 675 mm |
| Clamping force | 280 T |
|---|---|
| Tie bar spacing (H) | 630 mm |
| Shot volume | 1212 cm³ |
| Platen length | 930 mm |
| Bi-metal screw | Yes |
| Robot interface | hydraulic |
| Opening of the press | 710 mm |
| Screw diameter | 70 mm |
|---|---|
| Tie bar spacing (V) | 630 mm |
| Pressure on material | 1877 bar |
| Platen width | 930 mm |
| Equipped with robot | No |
| Number of cores | 2 |
| Mould size | 675 |
| Clamping force | 50 T |
|---|---|
| Tie bar spacing (H) | 370 mm |
| Shot volume | 52 cm³ |
| Pressure on material | 2180 bar |
| Platen width | 570 mm |
| Mould size |
| Screw diameter | 25 mm |
|---|---|
| Tie bar spacing (V) | 370 mm |
| Shot weight | 46 g |
| Platen length | 520 mm |
| Robot interface |
| Clamping force | 280 T |
|---|---|
| Tie bar spacing (H) | 630 mm |
| Shot volume | 231 cm³ |
| Pressure on material | 2423 bar |
| Platen width | 1505 mm |
| Equipped with robot | Yes |
| Number of cores | 4 |
| Opening of the press | 675 mm |
| Screw diameter | 40 mm |
|---|---|
| Tie bar spacing (V) | 630 mm |
| Shot weight | 210 g |
| Platen length | 1385 mm |
| Bi-metal screw | Yes |
| Robot interface | OUI |
| Number of heating zones | 10 |
| Mould size |
| Clamping force | 200 T |
|---|---|
| Tie bar spacing (H) | 500 mm |
| Shot volume | 323 cm³ |
| Platen length | 750 mm |
| Robot interface |
| Screw diameter | 45 mm |
|---|---|
| Tie bar spacing (V) | 500 mm |
| Pressure on material | 1973 bar |
| Platen width | 750 mm |
| Mould size |
| Clamping force | 200 T |
|---|---|
| Tie bar spacing (H) | 560 mm |
| Shot volume | 445 cm³ |
| Pressure on material | 1946 bar |
| Platen width | 1235 mm |
| Opening of the press | 575 mm |
| Screw diameter | 50 mm |
|---|---|
| Tie bar spacing (V) | 560 mm |
| Shot weight | 400 g |
| Platen length | 1235 mm |
| Robot interface | |
| Mould size | 310 - 760 |
Czech Republic
2006
| Clamping force | 420 T |
|---|---|
| Tie bar spacing (H) | 800 mm |
| Shot volume | 891 cm³ |
| Pressure on material | 2420 bar |
| Platen width | 1100 mm |
| Mould size |
| Screw diameter | 60 mm |
|---|---|
| Tie bar spacing (V) | 710 mm |
| Shot weight | 800 g |
| Platen length | 1200 mm |
| Robot interface |
France
2003
| Clamping force | 150 T |
|---|---|
| Tie bar spacing (H) | 500 mm |
| Shot volume | 323 cm³ |
| Pressure on material | 1973 bar |
| Platen width | 750 mm |
| Equipped with robot | No |
| Number of cores | 2 |
| Opening of the press | 500 mm |
| Screw diameter | 45 mm |
|---|---|
| Tie bar spacing (V) | 500 mm |
| Shot weight | 290 g |
| Platen length | 750 mm |
| Bi-metal screw | Yes |
| Robot interface | |
| Number of heating zones | 4 |
| Mould size | 250/560 |
| Clamping force | 200 T |
|---|---|
| Tie bar spacing (H) | 560 mm |
| Shot volume | 323 cm³ |
| Equipped with robot | No |
| Mould size |
| Screw diameter | 45 mm |
|---|---|
| Tie bar spacing (V) | 560 mm |
| Pressure on material | 1973 bar |
| Robot interface |
Slovakia
2006
| Clamping force | 250 T |
|---|---|
| Tie bar spacing (H) | 630 mm |
| Shot weight | 482 g |
| Bi-metal screw | No |
| Robot interface | |
| Mould size |
| Screw diameter | 50 mm |
|---|---|
| Tie bar spacing (V) | 630 mm |
| Pressure on material | 2426 bar |
| Equipped with robot | Yes |
| Opening of the press | 675 mm |
| Clamping force | T |
|---|---|
| Tie bar spacing (H) | 820 mm |
| Shot volume | cm³ |
| Pressure on material | 1855 bar |
| Platen width | mm |
| Equipped with robot | |
| Number of cores | |
| Opening of the press | 770 mm |
| Screw diameter | 80 mm |
|---|---|
| Tie bar spacing (V) | 820 mm |
| Shot weight | g |
| Platen length | mm |
| Bi-metal screw | |
| Robot interface | |
| Number of heating zones | |
| Mould size |
| Clamping force | 1000 T |
|---|---|
| Tie bar spacing (H) | 1400 mm |
| Shot volume | 4372 cm³ |
| Platen length | 1950 mm |
| Robot interface | |
| Mould size |
| Screw diameter | 110 mm |
|---|---|
| Tie bar spacing (V) | 1120 mm |
| Shot weight | 3930 g |
| Platen width | 1670 mm |
| Number of cores | 4 |
France
2001
| Clamping force | 420 T |
|---|---|
| Tie bar spacing (H) | 810 mm |
| Shot volume | 1039 cm³ |
| Platen length | 1200 mm |
| Robot interface |
| Screw diameter | 70 mm |
|---|---|
| Tie bar spacing (V) | 710 mm |
| Pressure on material | 1450 bar |
| Platen width | 1100 mm |
| Mould size |
Italy
1996
| Clamping force | 100 T |
|---|---|
| Mould size |
| Robot interface |
|---|
Шприцмашина DEMAG EXTRA 100 - 430
Vstřikovací lis DEMAG EXTRA 100 - 430
DEMAG EXTRA 100 - 430 Sprøjtestøbemaskine
DEMAG EXTRA 100 - 430 Spritzgießmaschine
Πρέσα έγχυσης DEMAG EXTRA 100 - 430
DEMAG EXTRA 100 - 430 Injection moulding machine
Inyectora DEMAG EXTRA 100 - 430
Presse à injecter DEMAG EXTRA 100 - 430
Stroj za injekcijsko prešanje DEMAG EXTRA 100 - 430
DEMAG EXTRA 100 - 430 Fröccsöntőgép
Pressa a iniezione DEMAG EXTRA 100 - 430
DEMAG EXTRA 100 - 430 Įpurškimo liejimo staklės
DEMAG EXTRA 100 - 430 Spuitgietmachine
Wtryskarka DEMAG EXTRA 100 - 430
Injetora DEMAG EXTRA 100 - 430
Mașină de injectat DEMAG EXTRA 100 - 430
DEMAG EXTRA 100 - 430 Термопластавтомат
Mašina za injekciono prešanje DEMAG EXTRA 100 - 430
DEMAG EXTRA 100 - 430 Formsprutningsmaskin
Enjeksiyon makinesi DEMAG EXTRA 100 - 430
Romania
Greece
Spain
Turkey
EN
- Languages
English (GB)