Capacity
Swing over bed 400mm 15.7″
Swing over cross slide 246mm 9.6″
Height of centres 195mm 7.7″
Swing in gap 585mm 23″
Gap width from faceplate 165mm 6.5″
Bed length 1270mm 50″
Distance between centres 1270mm 50″

Spindle
Spindle nose D1 – 6 Camlock D1 – 6 Camlock
Taper in spindle nose bush No 4 MT No 4 MT
Spindle bore 54mm 2.1″
Maximum spindle speed 2500 rpm 2500 rpm
Spindle speed ranges
Low 14 – 300 rpm 14 – 300 rpm
Medium 36 – 830 rpm 36 – 830 rpm
High 109 – 2500 rpm 109 – 2500 rpm
Maximum spindle motor power 7.5kW 10 HP
Number of Imperial Pitches 56 56
Range of Imperial Pitches 2 – 56 TPI 2 – 56 TPI
Number of Diametral Pitches 20 20
Range of Diametral Pitches 8 – 56 DP 8 – 56 DP
Number of Metric Pitches 51 51
Range of Metric Pitches 0.2 – 14mm Pitch 0.2 – 14mm Pitch
Number of Module Pitches 20 20
Range of Module Pitches 0.2 – 3.5 MOD 0.2 – 3.5 MOD

Tailstock
Tailstock quill taper No 5 MT No 5 MT
Tailstock quill travel 145mm 5.7″

Fully refurbished complete with new drive.

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. Exapro recommends to check the details with the seller before a purchase

Length between centers 1270 mm
Center height 195 mm
Turning length 1250 mm
Turning Ø 200 mm
Ø above the bed 400 mm
Ø above transversing slide 346 mm
Diameter in the gap 165 mm
Max workpiece weight  kg
Spindle nose D1 – 6 Camlock
Spindle bore 54 mm
Turning speed 2500 rpm
Spindle motor power 7.5 kW
Overhauled no
Year of overhauling
Tailstock yes
Steady no
-------------------
Worked hours
Hours under power
State good
At local norms ---------
Status
Datasheet Colchester Triumph VS 2500
Client type Reseller
Active since 2019
Offers online 34
Last activity March 28, 2024

Description

Capacity
Swing over bed 400mm 15.7″
Swing over cross slide 246mm 9.6″
Height of centres 195mm 7.7″
Swing in gap 585mm 23″
Gap width from faceplate 165mm 6.5″
Bed length 1270mm 50″
Distance between centres 1270mm 50″

Spindle
Spindle nose D1 – 6 Camlock D1 – 6 Camlock
Taper in spindle nose bush No 4 MT No 4 MT
Spindle bore 54mm 2.1″
Maximum spindle speed 2500 rpm 2500 rpm
Spindle speed ranges
Low 14 – 300 rpm 14 – 300 rpm
Medium 36 – 830 rpm 36 – 830 rpm
High 109 – 2500 rpm 109 – 2500 rpm
Maximum spindle motor power 7.5kW 10 HP
Number of Imperial Pitches 56 56
Range of Imperial Pitches 2 – 56 TPI 2 – 56 TPI
Number of Diametral Pitches 20 20
Range of Diametral Pitches 8 – 56 DP 8 – 56 DP
Number of Metric Pitches 51 51
Range of Metric Pitches 0.2 – 14mm Pitch 0.2 – 14mm Pitch
Number of Module Pitches 20 20
Range of Module Pitches 0.2 – 3.5 MOD 0.2 – 3.5 MOD

Tailstock
Tailstock quill taper No 5 MT No 5 MT
Tailstock quill travel 145mm 5.7″

Fully refurbished complete with new drive.

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. Exapro recommends to check the details with the seller before a purchase


Specifications

Length between centers 1270 mm
Center height 195 mm
Turning length 1250 mm
Turning Ø 200 mm
Ø above the bed 400 mm
Ø above transversing slide 346 mm
Diameter in the gap 165 mm
Max workpiece weight  kg
Spindle nose D1 – 6 Camlock
Spindle bore 54 mm
Turning speed 2500 rpm
Spindle motor power 7.5 kW
Overhauled no
Year of overhauling
Tailstock yes
Steady no
-------------------
Worked hours
Hours under power
State good
At local norms ---------
Status

About this seller

Client type Reseller
Active since 2019
Offers online 34
Last activity March 28, 2024

Here is a selection of similar machines

Colchester Triumph VS2500 lathe