Contact us to receive an offer.
| Manufacturer | Colchester |
|---|---|
| Model | Master |
| Year | |
| Location | United Kingdom
|
Colchester Master 2500 conventional parallel lathe, with a stated length between centres of 1016 mm, a swing over the bed of 330.2 mm, and a maximum turning speed of 2500 rpm. The current listing also specifies a 1 5/8-inch spindle bore, 16 speeds from 20 to 2500 rpm, 3- and 4-jaw chucks, and a 4-way toolpost.
The machine has a headstock, carriage, cross-slide, bed and tailstock. A three-jaw chuck is mounted on the spindle; no workpiece is shown in the chuck. A DROII-2 digital readout is mounted above the headstock. Its display appears inactive or unreadable in the available view, so its operating status is not confirmed. Headstock controls include a speed-selection dial, selector levers, buttons and an emergency-stop button. Yellow safety guard panels are fitted along parts of the bed, and an orange guard is present around the chuck area.
Visible surfaces show grime, oil staining, scuffs and paint wear on the bed, carriage and headstock casing. This description does not confirm the machine’s operational condition. The listing identifies the make and model as Colchester Master; no year of manufacture is specified.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
lathes
Colchester Master 2500 13" x 40" Gap Bed Centre Lathe
13" Swing Over Bed
40" Between Centres
1 5/8" Spindle Bore
16 Speeds 20- 2500 rpm
3 & 4 Jaw Chucks
4 Way Toolpost
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Machinery dealer |
| Active since | 2017 |
| Offers online | 128 |
| Last activity | Oct. 30, 2026 |
lathes
Colchester Master 2500 13" x 40" Gap Bed Centre Lathe
13" Swing Over Bed
40" Between Centres
1 5/8" Spindle Bore
16 Speeds 20- 2500 rpm
3 & 4 Jaw Chucks
4 Way Toolpost
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
Colchester Master 2500 conventional parallel lathe, with a stated length between centres of 1016 mm, a swing over the bed of 330.2 mm, and a maximum turning speed of 2500 rpm. The current listing also specifies a 1 5/8-inch spindle bore, 16 speeds from 20 to 2500 rpm, 3- and 4-jaw chucks, and a 4-way toolpost.
The machine has a headstock, carriage, cross-slide, bed and tailstock. A three-jaw chuck is mounted on the spindle; no workpiece is shown in the chuck. A DROII-2 digital readout is mounted above the headstock. Its display appears inactive or unreadable in the available view, so its operating status is not confirmed. Headstock controls include a speed-selection dial, selector levers, buttons and an emergency-stop button. Yellow safety guard panels are fitted along parts of the bed, and an orange guard is present around the chuck area.
Visible surfaces show grime, oil staining, scuffs and paint wear on the bed, carriage and headstock casing. This description does not confirm the machine’s operational condition. The listing identifies the make and model as Colchester Master; no year of manufacture is specified.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2017 |
| Offers online | 128 |
| Last activity | Oct. 30, 2026 |
Denmark
2010
| Center height | 165 mm |
|---|---|
| Spindle nose | |
| Turning speed | 2500 rpm |
| Overhauled | no |
| Steady | no |
| Turning length | 635 mm |
|---|---|
| Spindle bore | 40 mm |
| Spindle motor power | -2.8 kW |
| Tailstock | no |
| Length between centers | 2000 mm |
|---|---|
| Ø above transversing slide | 368 mm |
| Spindle nose | |
| Turning speed | 1400 rpm |
| Overhauled | no |
| Steady | no |
| Ø above the bed | 535 mm |
|---|---|
| Diameter in the gap | 810 mm |
| Spindle bore | 89 mm |
| Spindle motor power | 9.3 kW |
| Tailstock | no |
Switzerland
| Length between centers | 4000 mm |
|---|---|
| Ø above the bed | 740 mm |
| Spindle nose | |
| Spindle motor power | 15 kW |
| Tailstock | yes |
| Type of chuck | 3 jaw |
| Center height | 380 mm |
|---|---|
| Ø above transversing slide | 520 mm |
| Turning speed | 800 rpm |
| Overhauled | no |
| Steady | no |
United Kingdom
| Length between centers | 1270 mm |
|---|---|
| Turning length | 1250 mm |
| Ø above the bed | 400 mm |
| Diameter in the gap | 165 mm |
| Spindle bore | 54 mm |
| Spindle motor power | 7.5 kW |
| Tailstock | no |
| Type of chuck | 3 jaw |
| Center height | 195 mm |
|---|---|
| Turning Ø | 400 mm |
| Ø above transversing slide | 346 mm |
| Spindle nose | D1 – 6 Camlock |
| Turning speed | 2500 rpm |
| Overhauled | no |
| Steady | no |
Austria
2015
| Spindle nose | |
|---|---|
| Tailstock | no |
| Overhauled | no |
|---|---|
| Steady | no |
United Kingdom
2007
| Length between centers | 3000 mm |
|---|---|
| Turning length | 3000 mm |
| Ø above the bed | 800 mm |
| Diameter in the gap | 870 mm |
| Spindle nose | |
| Turning speed | 1500 rpm |
| Overhauled | no |
| Tailstock | no |
| Center height | mm |
|---|---|
| Turning Ø | 800 mm |
| Ø above transversing slide | mm |
| Max workpiece weight | kg |
| Spindle bore | 120 mm |
| Spindle motor power | kW |
| Year of overhauling | |
| Steady | no |
| Length between centers | 600 mm |
|---|---|
| Turning Ø | 350 mm |
| Ø above transversing slide | 200 mm |
| Spindle nose | |
| Turning speed | 1500 rpm |
| Tailstock | no |
| Type of chuck | 3 jaw |
| Center height | 175 mm |
|---|---|
| Ø above the bed | 350 mm |
| Diameter in the gap | 340 mm |
| Spindle bore | 42 mm |
| Overhauled | no |
| Steady | no |
United Kingdom
2024
| Length between centers | 1500 mm |
|---|---|
| Ø above transversing slide | 370 mm |
| Spindle nose | |
| Tailstock | no |
| Ø above the bed | 554 mm |
|---|---|
| Diameter in the gap | 830 mm |
| Overhauled | no |
| Steady | no |
United Kingdom
2000
| Length between centers | 1250 mm |
|---|---|
| Diameter in the gap | 585 mm |
| Spindle bore | 54 mm |
| Overhauled | no |
| Steady | no |
| Turning Ø | 400 mm |
|---|---|
| Spindle nose | |
| Turning speed | 2500 rpm |
| Tailstock | no |
| Type of chuck | 3 jaw |
United Kingdom
1982
| Length between centers | 100 mm |
|---|---|
| Ø above the bed | 21 mm |
| Diameter in the gap | 812.8 mm |
| Spindle bore | 3.5 mm |
| Spindle motor power | 5 kW |
| Tailstock | no |
| Center height | 266.7 mm |
|---|---|
| Ø above transversing slide | 368.3 mm |
| Spindle nose | |
| Turning speed | 1400 rpm |
| Overhauled | no |
| Steady | no |
United Kingdom
| Length between centers | 3000 mm |
|---|---|
| Ø above transversing slide | 390 mm |
| Spindle nose | |
| Turning speed | 1250 rpm |
| Tailstock | no |
| Ø above the bed | 635 mm |
|---|---|
| Diameter in the gap | 900 mm |
| Spindle bore | 127 mm |
| Overhauled | no |
| Steady | no |
United Kingdom
~ 2000
| Length between centers | 1250 mm |
|---|---|
| Diameter in the gap | 585 mm |
| Spindle bore | 54 mm |
| Overhauled | no |
| Steady | no |
| Ø above the bed | 400 mm |
|---|---|
| Spindle nose | |
| Turning speed | 2500 rpm |
| Tailstock | no |
| Type of chuck | 4 jaw |
United Kingdom
| Length between centers | 100 mm |
|---|---|
| Spindle bore | 3.5 mm |
| Overhauled | no |
| Steady | no |
| Ø above the bed | 21 mm |
|---|---|
| Turning speed | 1400 rpm |
| Tailstock | no |
| Length between centers | 2500 mm |
|---|---|
| Spindle nose | |
| Overhauled | no |
| Steady | no |
| Center height | 250 mm |
|---|---|
| Spindle bore | 78 mm |
| Tailstock | no |
United Kingdom
| Turning speed | 1600 rpm |
|---|---|
| Tailstock | no |
| Type of chuck | 4 jaw |
| Overhauled | no |
|---|---|
| Steady | no |
| Length between centers | mm |
|---|---|
| Turning length | mm |
| Ø above the bed | mm |
| Diameter in the gap | 340 mm |
| Spindle nose | |
| Turning speed | rpm |
| Overhauled | no |
| Tailstock | no |
| Center height | mm |
|---|---|
| Turning Ø | 700 mm |
| Ø above transversing slide | 180 mm |
| Max workpiece weight | kg |
| Spindle bore | 40 mm |
| Spindle motor power | kW |
| Year of overhauling | |
| Steady | no |
| Length between centers | mm |
|---|---|
| Turning length | mm |
| Ø above the bed | mm |
| Diameter in the gap | 340 mm |
| Spindle nose | |
| Turning speed | rpm |
| Overhauled | no |
| Tailstock | no |
| Center height | mm |
|---|---|
| Turning Ø | 700 mm |
| Ø above transversing slide | 180 mm |
| Max workpiece weight | kg |
| Spindle bore | 40 mm |
| Spindle motor power | kW |
| Year of overhauling | |
| Steady | no |
| Length between centers | 1270 mm |
|---|---|
| Spindle nose | |
| Tailstock | no |
| Ø above the bed | 330.2 mm |
|---|---|
| Overhauled | no |
| Steady | no |
| Length between centers | 3048 mm |
|---|---|
| Spindle nose | |
| Tailstock | no |
| Type of chuck | 3 jaw |
| Ø above the bed | 533.4 mm |
|---|---|
| Overhauled | no |
| Steady | no |
Паралелен струг Colchester Master
Hrotový soustruh Colchester Master
Colchester Master Konventionel drejebænk
Colchester Master Spitzendrehmaschine
Παράλληλος τόρνος Colchester Master
Colchester Master Parallel lathe
Torno paralelo Colchester Master
Tour parallèle Colchester Master
Paralelni tokarski stroj Colchester Master
Colchester Master Csúcseszterga
Tornio parallelo Colchester Master
Colchester Master Lygiagrečios tekinimo staklės
Colchester Master Conventionele draaibank
Tokarka kłowa Colchester Master
Torno paralelo Colchester Master
Strung paralel Colchester Master
Colchester Master Токарно-винторезный станок
Paralelni strug Colchester Master
Colchester Master Konventionell svarv
Paralel torna Colchester Master
Belgium
Germany
Italy
France
EN
- Languages
English (GB)