Contact us to receive an offer.
| Manufacturer | CHINA JIANGMEN LANGJIE |
|---|---|
| Model | ZLC-300T |
| Year | 2024 |
| Location | Turkey
|
The CHINA JIANGMEN LANGJIE ZLC-300T is a cold chamber die casting machine manufactured in 2024, designed for industrial metal casting applications. It features a clamping unit with a locking force of 3000 kN and a closing stroke of 470 mm, suitable for handling molds with a die height ranging from 250 to 650 mm. The platen measures 870 by 950 mm, and the space between tie bars is 560 by 560 mm, supported by tie bars with a diameter of 110 mm. The injection unit offers three shot positions (0, -125 mm below center line) and an injection stroke of 440 mm, with plunger diameters of 50, 60, and 70 mm, allowing shot weights of 1.3, 2.5, and 2.7 kg respectively.
The machine operates with an intensifier injection force of 336 kN and casting pressures of 170, 118, and 87 MPa, providing casting areas of 172, 252, and 343 cm². It includes features such as manual front and back doors, electric ruler control for clamping stroke, proximity switch for ejection stroke control, and three injection positions. Additional controls include hand wheel control for fast pressure and intensifier speed, and a core pulling device with one patch of move core pulling. Lubrication is managed via plunger oil drip lubrication, and the machine is equipped with a water cooler (model SL-518) and uses mineral hydraulic oil.
The electrical system includes a 15 kW driving motor, operating at a working pressure of 14 MPa, and the hydraulic tank has a capacity of 670 liters. The overall dimensions are 6.5 m in length, 1.7 m in width, and 2.7 m in height, with a machine weight of approximately 11,500 kg.
Visible components include a yellow safety door and a sturdy metal frame, supported by four large metal tie rods. The machine is equipped with a control panel featuring multiple buttons and indicators located on the right side. Hydraulic or pneumatic valves and piping are mounted centrally, with additional lines and connections visible at the base. The rear side has metal safety panels with ventilation slots and four large cylindrical rods extending from it. The machine shows signs of use such as dirt and wear marks on the yellow door and base, indicating it has been operated in an industrial environment on a concrete floor.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Configurations Specification Front door Manual Back door Manual Clamping stroke control Electric ruler Ejection stroke control Proximity switch Injection position Three injection positions Fast pressure and intensifier speed control Hand wheel control Core pulling device 1 patches of move core pulling
Plunger lubrication Plunger oil drip lubrication Water cooler SL-518 Hydraulic oil testing machine Mineral oil Form 1-1 COLD CHAMBER DIE CASTING MACHINE SPECIFICATIONS ITEM UNIT ZLC300 CLAMPING UNIT
LOCKING FORCE kN 3000 CLOSING STROKE mm 470 EJECTOR FORCE kN 158 EJECTOR STROKE mm 110 DIE HEIGHT MIN-MAX mm 250-650
PLATEN SIZE (HxV) mm 870×950 SPACE BETWEEN TIE BARS mm 560×560 TIE BARS DIAMETER mm φ110 INJECTION UNIT SHOT POSITION (below centre line) mm 0，-125
INJECTION STROKE mm 440 INJECTION PLUNGER DIAMETER mm φ50，φ60，φ70 SHOT WEIGHT(AL) kg 1.3, 2.5, 2.7 INTENSIFIER INIECTION FORCE kN 336
CASTING PRESSURE MPa 170, 118, 87 CASTING AREA cm2 172, 252, 343 Chamber Flange Diameter mm 101.6 Chamber Flange Protrusion mm 12 Plunger Hold Out mm 165 ELECTRICAL SYSTEM
DRIVING MOTOR POWER 15Kw OTHERS WORKING PRESSURE MPa 14 TANK CAPACITY LITRE 670 OVERALL DIMENSION m(LxWxH) 6.5×1.7×2.7 MACHINE GREIGHT Kg 11500
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| miscellaneous-presses-and-forging-machines-china-jiangmen-langjie-zlc-300t-p2603121209_14.docx | Download |
| Client type | Factory – large company |
| Active since | 2026 |
| Offers online | 9 |
| Last activity | Nov. 1, 2026 |
Configurations Specification Front door Manual Back door Manual Clamping stroke control Electric ruler Ejection stroke control Proximity switch Injection position Three injection positions Fast pressure and intensifier speed control Hand wheel control Core pulling device 1 patches of move core pulling
Plunger lubrication Plunger oil drip lubrication Water cooler SL-518 Hydraulic oil testing machine Mineral oil Form 1-1 COLD CHAMBER DIE CASTING MACHINE SPECIFICATIONS ITEM UNIT ZLC300 CLAMPING UNIT
LOCKING FORCE kN 3000 CLOSING STROKE mm 470 EJECTOR FORCE kN 158 EJECTOR STROKE mm 110 DIE HEIGHT MIN-MAX mm 250-650
PLATEN SIZE (HxV) mm 870×950 SPACE BETWEEN TIE BARS mm 560×560 TIE BARS DIAMETER mm φ110 INJECTION UNIT SHOT POSITION (below centre line) mm 0，-125
INJECTION STROKE mm 440 INJECTION PLUNGER DIAMETER mm φ50，φ60，φ70 SHOT WEIGHT(AL) kg 1.3, 2.5, 2.7 INTENSIFIER INIECTION FORCE kN 336
CASTING PRESSURE MPa 170, 118, 87 CASTING AREA cm2 172, 252, 343 Chamber Flange Diameter mm 101.6 Chamber Flange Protrusion mm 12 Plunger Hold Out mm 165 ELECTRICAL SYSTEM
DRIVING MOTOR POWER 15Kw OTHERS WORKING PRESSURE MPa 14 TANK CAPACITY LITRE 670 OVERALL DIMENSION m(LxWxH) 6.5×1.7×2.7 MACHINE GREIGHT Kg 11500
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
The CHINA JIANGMEN LANGJIE ZLC-300T is a cold chamber die casting machine manufactured in 2024, designed for industrial metal casting applications. It features a clamping unit with a locking force of 3000 kN and a closing stroke of 470 mm, suitable for handling molds with a die height ranging from 250 to 650 mm. The platen measures 870 by 950 mm, and the space between tie bars is 560 by 560 mm, supported by tie bars with a diameter of 110 mm. The injection unit offers three shot positions (0, -125 mm below center line) and an injection stroke of 440 mm, with plunger diameters of 50, 60, and 70 mm, allowing shot weights of 1.3, 2.5, and 2.7 kg respectively.
The machine operates with an intensifier injection force of 336 kN and casting pressures of 170, 118, and 87 MPa, providing casting areas of 172, 252, and 343 cm². It includes features such as manual front and back doors, electric ruler control for clamping stroke, proximity switch for ejection stroke control, and three injection positions. Additional controls include hand wheel control for fast pressure and intensifier speed, and a core pulling device with one patch of move core pulling. Lubrication is managed via plunger oil drip lubrication, and the machine is equipped with a water cooler (model SL-518) and uses mineral hydraulic oil.
The electrical system includes a 15 kW driving motor, operating at a working pressure of 14 MPa, and the hydraulic tank has a capacity of 670 liters. The overall dimensions are 6.5 m in length, 1.7 m in width, and 2.7 m in height, with a machine weight of approximately 11,500 kg.
Visible components include a yellow safety door and a sturdy metal frame, supported by four large metal tie rods. The machine is equipped with a control panel featuring multiple buttons and indicators located on the right side. Hydraulic or pneumatic valves and piping are mounted centrally, with additional lines and connections visible at the base. The rear side has metal safety panels with ventilation slots and four large cylindrical rods extending from it. The machine shows signs of use such as dirt and wear marks on the yellow door and base, indicating it has been operated in an industrial environment on a concrete floor.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Factory – large company |
| Active since | 2026 |
| Offers online | 9 |
| Last activity | Nov. 1, 2026 |
Шприцмашина CHINA JIANGMEN LANGJIE ZLC-300T
Vstřikovací lis CHINA JIANGMEN LANGJIE ZLC-300T
CHINA JIANGMEN LANGJIE ZLC-300T Sprøjtestøbemaskine
CHINA JIANGMEN LANGJIE ZLC-300T Spritzgießmaschine
Πρέσα έγχυσης CHINA JIANGMEN LANGJIE ZLC-300T
CHINA JIANGMEN LANGJIE ZLC-300T Injection moulding machine
Inyectora CHINA JIANGMEN LANGJIE ZLC-300T
Presse à injecter CHINA JIANGMEN LANGJIE ZLC-300T
Stroj za injekcijsko prešanje CHINA JIANGMEN LANGJIE ZLC-300T
CHINA JIANGMEN LANGJIE ZLC-300T Fröccsöntőgép
Pressa a iniezione CHINA JIANGMEN LANGJIE ZLC-300T
CHINA JIANGMEN LANGJIE ZLC-300T Įpurškimo liejimo staklės
CHINA JIANGMEN LANGJIE ZLC-300T Spuitgietmachine
Wtryskarka CHINA JIANGMEN LANGJIE ZLC-300T
Injetora CHINA JIANGMEN LANGJIE ZLC-300T
Mașină de injectat CHINA JIANGMEN LANGJIE ZLC-300T
CHINA JIANGMEN LANGJIE ZLC-300T Термопластавтомат
Mašina za injekciono prešanje CHINA JIANGMEN LANGJIE ZLC-300T
CHINA JIANGMEN LANGJIE ZLC-300T Formsprutningsmaskin
Enjeksiyon makinesi CHINA JIANGMEN LANGJIE ZLC-300T
EN
- Languages
English (GB)