| Manufacturer | Challenger |
|---|---|
| Model | BNC-1840 |
| Year | 2015 |
| Location | Germany
|
Challenger BNC-1840 horizontal CNC lathe, manufactured in 2015. The machine is equipped with a FAGOR 8055i FL CNC control and a single turret with eight tool positions. It has no rotating tools. The stated turning speed is up to 4,500 rpm, with a spindle bore of 62 mm and a turning length of 1,000 mm. The stated swing over the bed is 475 mm, with X-axis travel of 260 mm and Z-axis travel of 1,000 mm. Machine dimensions are 1,953 mm wide and 2,022 mm high; weight is 3,000 kg.
Equipment includes a SCHUNK three-jaw chuck, a manual quill tailstock, and a BARUFFALDI TB 160 VDI 40 automatic tool turret. The machine has an enclosed working area with sliding safety doors and viewing windows. A separate operator panel with display and keypad is mounted beside the machine, and the control pendant includes two handwheels. The current description also lists a movable control panel, heat exchanger, automatic lubrication, high-pressure coolant system, work lamp, full enclosure, safety relays and Fagor servo drives.
The machine shows visible signs of use, including dirt and staining around the base and lower panels, chipped paint and grime around the turret and carriage, and metal chips in the working area. The control panel and handwheels appear intact, with light surface wear. These visible condition details do not establish the machine’s operating status.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Horizontal turning machine manufactured in 2015. This Challenger BNC-1840 (Microturn series) features a robust Fagor CNC control with a manual/power chuck and a disc turret tooling system. It has a machine weight of 3000 kg and is equipped with dual manual electronic handwheels for precise control. If you are looking to get high-quality turning capabilities, consider the Challenger BNC-1840 machine we have for sale. Contact us for further details.- CNC Control: FAGOR 8055i FL (with graphic cycle simulation and Microturn operator interface)
- Part Counter: 264
- Center Height: 230 mm
- Max Turning Length: 1,000 mm
- Swing Over Bed: 475 mm
- Spindle Speeds: 100 - 4,500 rpm
- Spindle Nose Mount: D 1-6 CAMLOCK (direct mount DIN 55029/6)
- AC Spindle Motor Power: 7.5 / 11 kW
- Drive Power (Total Connected Load): 20 kVA
- Nominal Operating Voltage: 400 V
- Frequency: 50 Hz
- Phase Count: 3 + PE
- Full Load Current: 52 A
- Max Load Current: 320 A
- Short Circuit Protection: 25 kA
- Tool Turret: BARUFFALDI TB 160, VDI 40 automatic 8-station tool turret with internal coolant supply (installed in place of standard manual quick-change tool post)
- Chuck: SCHUNK ROTA-S-PLUS 250-62/3 (3-jaw wedge bar chuck, Ø 250 mm, 62 mm spindle bore passage) with base jaws and hard reversible top jaws
- Tailstock: Manual quill tailstock with clamping lever
- Machine Dimensions (L x W x H): 3,030 mm (without chip conveyor) / 4,177 mm (with chip conveyor) x 1,953 mm x 2,022 mm
- Optional Equipment: Movable control panel; electronic handwheels (2 manual on apron and 1 portable); heat exchanger; automatic lubrication for headstock, longitudinal, and cross slides; high-pressure coolant system; halogen work lamp; full machine enclosure; Pilz safety relays; Fagor servo drives
Control Brand: FAGOR
Control Model: 8055i FL
Counter Spindle: no
Driven Tools: no
Machine Height: 2022 mm
Machine Length: 4177 mm
Machine Weight: 3000 kg
Machine Width: 1953 mm
Number of Axes: 2
Spindle Power: 11 kW
Spindle Speed: 4500 RPM
X-axis Travel: 260 mm
Z-axis Travel: 1000 mm
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Machinery dealer |
| Active since | 2019 |
| Offers online | 2052 |
| Last activity | Nov. 5, 2026 |
GINDUMAC GmbH is a dynamic German company specializing in the global trade of used industrial machinery. Our international team of more than 30 employees supports manufacturers worldwide in buying and selling high-quality used equipment across sectors such as metalworking, sheet metal, plastics, woodworking, and automation.
Through a data-driven, digital approach, the company delivers accurate machine valuations, professional inspections, and end-to-end transaction management — ensuring a transparent, secure, and efficient sales process for both buyers and sellers.
Horizontal turning machine manufactured in 2015. This Challenger BNC-1840 (Microturn series) features a robust Fagor CNC control with a manual/power chuck and a disc turret tooling system. It has a machine weight of 3000 kg and is equipped with dual manual electronic handwheels for precise control. If you are looking to get high-quality turning capabilities, consider the Challenger BNC-1840 machine we have for sale. Contact us for further details.- CNC Control: FAGOR 8055i FL (with graphic cycle simulation and Microturn operator interface)
- Part Counter: 264
- Center Height: 230 mm
- Max Turning Length: 1,000 mm
- Swing Over Bed: 475 mm
- Spindle Speeds: 100 - 4,500 rpm
- Spindle Nose Mount: D 1-6 CAMLOCK (direct mount DIN 55029/6)
- AC Spindle Motor Power: 7.5 / 11 kW
- Drive Power (Total Connected Load): 20 kVA
- Nominal Operating Voltage: 400 V
- Frequency: 50 Hz
- Phase Count: 3 + PE
- Full Load Current: 52 A
- Max Load Current: 320 A
- Short Circuit Protection: 25 kA
- Tool Turret: BARUFFALDI TB 160, VDI 40 automatic 8-station tool turret with internal coolant supply (installed in place of standard manual quick-change tool post)
- Chuck: SCHUNK ROTA-S-PLUS 250-62/3 (3-jaw wedge bar chuck, Ø 250 mm, 62 mm spindle bore passage) with base jaws and hard reversible top jaws
- Tailstock: Manual quill tailstock with clamping lever
- Machine Dimensions (L x W x H): 3,030 mm (without chip conveyor) / 4,177 mm (with chip conveyor) x 1,953 mm x 2,022 mm
- Optional Equipment: Movable control panel; electronic handwheels (2 manual on apron and 1 portable); heat exchanger; automatic lubrication for headstock, longitudinal, and cross slides; high-pressure coolant system; halogen work lamp; full machine enclosure; Pilz safety relays; Fagor servo drives
Control Brand: FAGOR
Control Model: 8055i FL
Counter Spindle: no
Driven Tools: no
Machine Height: 2022 mm
Machine Length: 4177 mm
Machine Weight: 3000 kg
Machine Width: 1953 mm
Number of Axes: 2
Spindle Power: 11 kW
Spindle Speed: 4500 RPM
X-axis Travel: 260 mm
Z-axis Travel: 1000 mm
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
Challenger BNC-1840 horizontal CNC lathe, manufactured in 2015. The machine is equipped with a FAGOR 8055i FL CNC control and a single turret with eight tool positions. It has no rotating tools. The stated turning speed is up to 4,500 rpm, with a spindle bore of 62 mm and a turning length of 1,000 mm. The stated swing over the bed is 475 mm, with X-axis travel of 260 mm and Z-axis travel of 1,000 mm. Machine dimensions are 1,953 mm wide and 2,022 mm high; weight is 3,000 kg.
Equipment includes a SCHUNK three-jaw chuck, a manual quill tailstock, and a BARUFFALDI TB 160 VDI 40 automatic tool turret. The machine has an enclosed working area with sliding safety doors and viewing windows. A separate operator panel with display and keypad is mounted beside the machine, and the control pendant includes two handwheels. The current description also lists a movable control panel, heat exchanger, automatic lubrication, high-pressure coolant system, work lamp, full enclosure, safety relays and Fagor servo drives.
The machine shows visible signs of use, including dirt and staining around the base and lower panels, chipped paint and grime around the turret and carriage, and metal chips in the working area. The control panel and handwheels appear intact, with light surface wear. These visible condition details do not establish the machine’s operating status.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2019 |
| Offers online | 2052 |
| Last activity | Nov. 5, 2026 |
GINDUMAC GmbH is a dynamic German company specializing in the global trade of used industrial machinery. Our international team of more than 30 employees supports manufacturers worldwide in buying and selling high-quality used equipment across sectors such as metalworking, sheet metal, plastics, woodworking, and automation.
Through a data-driven, digital approach, the company delivers accurate machine valuations, professional inspections, and end-to-end transaction management — ensuring a transparent, secure, and efficient sales process for both buyers and sellers.
CNC струг Challenger BNC-1840
CNC soustruh Challenger BNC-1840
Challenger BNC-1840 CNC-drejebænk
Challenger BNC-1840 CNC-Drehmaschine
Τόρνος CNC Challenger BNC-1840
Challenger BNC-1840 CNC lathe
Torno CNC Challenger BNC-1840
Tour CNC Challenger BNC-1840
CNC tokarski stroj Challenger BNC-1840
Challenger BNC-1840 CNC esztergagép
Tornio CNC Challenger BNC-1840
Challenger BNC-1840 CNC tekinimo staklės
Challenger BNC-1840 CNC-draaibank
Tokarka CNC Challenger BNC-1840
Torno CNC Challenger BNC-1840
Strung CNC Challenger BNC-1840
Challenger BNC-1840 Токарный станок с ЧПУ
CNC strug Challenger BNC-1840
Challenger BNC-1840 CNC-svarv
CNC torna Challenger BNC-1840
EN
- Languages
English (GB)