| Manufacturer | BORCHE (China) |
|---|---|
| Model | BS-III 650 |
| Year | 2016 |
| Location | Kazakhstan
|
Overview
This is a 650-tonne injection moulding machine intended for production of thermoplastic parts. It is equipped with a servo-driven hydraulic system, computer control and a double-toggle clamping mechanism. The machine was commissioned in 2016, used intermittently until 2019 for a total of 41,000 clamping cycles, and has not been operated since 2019. It is currently stored inside an industrial building and is in a disconnected condition.
Operational history and condition
- Commissioned: 2016; last used: 2019.
- Recorded clamping cycles: 41,000.
- Current status: stored indoors and disconnected. No claim of testing, commissioning, or operational readiness is made.
Main technical specifications
• Nominal clamping force: 650 tonnes / 6,500 kN
• Distance between tie bars: 930 × 900 mm
• Available screw diameters: 80, 90 and 100 mm (installed: 90 mm)
• Platen dimensions: 1,310 × 1,280 mm
• Moving platen opening stroke: 880 mm
• Mould thickness range: 300–870 mm
• Maximum daylight between platens: 1,750 mm
• Ejector stroke: 280 mm
• Ejector force: 137.4 kN
• Screw injection stroke: 450 mm
• Maximum screw speed: 100 rpm
• Hydraulic system pressure: 17.5 MPa
• Motor power: 22 + 30 kW
• Heater power: 33.5 kW
• Hydraulic oil tank capacity: 1,200 litres
• Overall dimensions (approx.): 9.18 × 2.16 × 2.47 m (L × W × H)
• Machine weight (approx.): 24,000 kg
Auxiliary equipment included
• WENSUI automatic vacuum loader for conveying plastic granules to the feed hopper
• WENSUI hot-air hopper dryer for drying and preheating granules
• WENSUI industrial water chiller for mould and process cooling
This package covers material preparation, feeding and cooling stages commonly required for injection moulding production.
Notes for prospective buyers
- The machine is offered in its stored, disconnected condition; no additional condition or operational guarantees are provided here.
- Inspection and an operational demonstration can be arranged by prior agreement (as stated in the existing listing).
- Transport, rigging and recommissioning requirements are the responsibility of the buyer.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
The machine is designed for manufacturing thermoplastic parts by injection moulding. It features a servo-driven hydraulic system, computer control and a double-toggle clamping mechanism.
Commissioned in 2016 and used intermittently until 2019. Only 41,000 clamping cycles were completed during this period. The machine has not been operated since 2019.
It is currently stored inside an industrial building in a disconnected condition.
MAIN TECHNICAL SPECIFICATIONS
• Nominal clamping force: 650 tonnes / 6,500 kN.
• Distance between tie bars: 930 × 900 mm.
• Available screw diameters: 80, 90 and 100 mm. Installed screw diameter: 90 mm.
• Platen dimensions: 1,310 × 1,280 mm.
• Moving platen opening stroke: 880 mm.
• Mould thickness range: 300–870 mm.
• Maximum daylight between platens: 1,750 mm.
• Ejector stroke: 280 mm.
• Ejector force: 137.4 kN.
• Screw injection stroke: 450 mm.
• Maximum screw speed: 100 rpm.
• Hydraulic system pressure: 17.5 MPa.
• Motor power: 22 + 30 kW.
• Heater power: 33.5 kW.
• Hydraulic oil tank capacity: 1,200 litres.
• Overall dimensions, L × W × H: approximately 9.18 × 2.16 × 2.47 m.
• Machine weight: approximately 24,000 kg.
AUXILIARY EQUIPMENT INCLUDED
• WENSUI automatic vacuum loader for conveying plastic granules to the feed hopper.
• WENSUI hot-air hopper dryer for drying and preheating granules before processing.
• WENSUI industrial water chiller for cooling the mould and process cooling circuits.
The package covers the main stages of material preparation and feeding, as well as cooling for injection moulding production.
Inspection and an operational demonstration can be arranged by prior agreement.
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Private person / Without company |
| Active since | 2026 |
| Offers online | 2 |
| Last activity | Oct. 30, 2026 |
The machine is designed for manufacturing thermoplastic parts by injection moulding. It features a servo-driven hydraulic system, computer control and a double-toggle clamping mechanism.
Commissioned in 2016 and used intermittently until 2019. Only 41,000 clamping cycles were completed during this period. The machine has not been operated since 2019.
It is currently stored inside an industrial building in a disconnected condition.
MAIN TECHNICAL SPECIFICATIONS
• Nominal clamping force: 650 tonnes / 6,500 kN.
• Distance between tie bars: 930 × 900 mm.
• Available screw diameters: 80, 90 and 100 mm. Installed screw diameter: 90 mm.
• Platen dimensions: 1,310 × 1,280 mm.
• Moving platen opening stroke: 880 mm.
• Mould thickness range: 300–870 mm.
• Maximum daylight between platens: 1,750 mm.
• Ejector stroke: 280 mm.
• Ejector force: 137.4 kN.
• Screw injection stroke: 450 mm.
• Maximum screw speed: 100 rpm.
• Hydraulic system pressure: 17.5 MPa.
• Motor power: 22 + 30 kW.
• Heater power: 33.5 kW.
• Hydraulic oil tank capacity: 1,200 litres.
• Overall dimensions, L × W × H: approximately 9.18 × 2.16 × 2.47 m.
• Machine weight: approximately 24,000 kg.
AUXILIARY EQUIPMENT INCLUDED
• WENSUI automatic vacuum loader for conveying plastic granules to the feed hopper.
• WENSUI hot-air hopper dryer for drying and preheating granules before processing.
• WENSUI industrial water chiller for cooling the mould and process cooling circuits.
The package covers the main stages of material preparation and feeding, as well as cooling for injection moulding production.
Inspection and an operational demonstration can be arranged by prior agreement.
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
Overview
This is a 650-tonne injection moulding machine intended for production of thermoplastic parts. It is equipped with a servo-driven hydraulic system, computer control and a double-toggle clamping mechanism. The machine was commissioned in 2016, used intermittently until 2019 for a total of 41,000 clamping cycles, and has not been operated since 2019. It is currently stored inside an industrial building and is in a disconnected condition.
Operational history and condition
- Commissioned: 2016; last used: 2019.
- Recorded clamping cycles: 41,000.
- Current status: stored indoors and disconnected. No claim of testing, commissioning, or operational readiness is made.
Main technical specifications
• Nominal clamping force: 650 tonnes / 6,500 kN
• Distance between tie bars: 930 × 900 mm
• Available screw diameters: 80, 90 and 100 mm (installed: 90 mm)
• Platen dimensions: 1,310 × 1,280 mm
• Moving platen opening stroke: 880 mm
• Mould thickness range: 300–870 mm
• Maximum daylight between platens: 1,750 mm
• Ejector stroke: 280 mm
• Ejector force: 137.4 kN
• Screw injection stroke: 450 mm
• Maximum screw speed: 100 rpm
• Hydraulic system pressure: 17.5 MPa
• Motor power: 22 + 30 kW
• Heater power: 33.5 kW
• Hydraulic oil tank capacity: 1,200 litres
• Overall dimensions (approx.): 9.18 × 2.16 × 2.47 m (L × W × H)
• Machine weight (approx.): 24,000 kg
Auxiliary equipment included
• WENSUI automatic vacuum loader for conveying plastic granules to the feed hopper
• WENSUI hot-air hopper dryer for drying and preheating granules
• WENSUI industrial water chiller for mould and process cooling
This package covers material preparation, feeding and cooling stages commonly required for injection moulding production.
Notes for prospective buyers
- The machine is offered in its stored, disconnected condition; no additional condition or operational guarantees are provided here.
- Inspection and an operational demonstration can be arranged by prior agreement (as stated in the existing listing).
- Transport, rigging and recommissioning requirements are the responsibility of the buyer.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Private person / Without company |
| Active since | 2026 |
| Offers online | 2 |
| Last activity | Oct. 30, 2026 |
CNC абкант преса BORCHE (China) BS-III 650
CNC ohraňovací lis BORCHE (China) BS-III 650
BORCHE (China) BS-III 650 CNC-kantpresse
BORCHE (China) BS-III 650 CNC-Abkantpresse
CNC στραντζόπρεσα BORCHE (China) BS-III 650
BORCHE (China) BS-III 650 CNC press brake
Prensa plegadora CNC BORCHE (China) BS-III 650
Presse plieuse CNC BORCHE (China) BS-III 650
CNC abkant preša BORCHE (China) BS-III 650
BORCHE (China) BS-III 650 CNC él-hajlító prés
Piegatrice CNC BORCHE (China) BS-III 650
BORCHE (China) BS-III 650 CNC lenkimo presas
BORCHE (China) BS-III 650 CNC-kantpers
Prasa krawędziowa CNC BORCHE (China) BS-III 650
Prensa dobradeira CNC BORCHE (China) BS-III 650
Presă abkant CNC BORCHE (China) BS-III 650
BORCHE (China) BS-III 650 Термопластавтомат (Injection moulding machine)
CNC abkant presa BORCHE (China) BS-III 650
BORCHE (China) BS-III 650 CNC-kantpress
CNC abkant pres BORCHE (China) BS-III 650
EN
- Languages
English (GB)