Biglia B565 CNC lathe

Top seller

Price on request

View price
Manufacturer Biglia
Model B565
Year 2016
Location Italy IT

Specifications

Category Lathes - CNC lathes
Turning length 560 mm
Turning Ø 290 mm
Ø above the bed 580 mm
Type of CNC
X-axis 170 mm
Z-axis 560 mm
Spindle taper ASA 6
Spindle bore 76 mm
Number of turrets 12
Number of tools on turret 12
Number of rotating tools 12
Turning speed 4000 rpm
Spindle motor power 26 kW
Tailstock yes
Bar feeder no
Length x width x height 4487.0 × 1901.0 × 2125.0
Weight 4850 kg
worked hours
hours under power
state as-is, where-is
At local norms ---------
status
Datasheet Biglia B565M
Last availability date 20/11/2026
Product id P261119177
Language

Automatic description (AI-Generated)

This 2016 Biglia B565 is an enclosed CNC lathe with a 4-axis configuration. It has a stated turning diameter of 290 mm, turning length of 560 mm and swing above the bed of 580 mm. The machine measures 4,487 × 1,901 × 2,125 mm and weighs 4,850 kg.

The main spindle has a 76 mm bore, reaches 4,000 rpm and is driven by a 26 kW motor. The machine is equipped with a 12-position turret and 12 rotating-tool positions. X-axis travel is 170 mm and Z-axis travel is 560 mm. The current description also lists a 70 mm maximum bar diameter, a counter spindle, driven tools and a swarf conveyor.

The machining area is enclosed, with a chuck and multi-position turret. A CNC control with display, keypad and buttons is mounted at the front right; the control is identified as a FANUC Series 32i-Model B. Toolholders and cutting tools are fitted in the turret, and coolant hoses are present in the work area.

Visible machining residue, chips, grime and streaking are present on interior and exterior surfaces, including around the chuck and turret. No workpiece is shown in the machining area. The description does not make any claim about the machine’s operating condition.

The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.

Seller's description

This 4-axis Biglia B565 was manufactured in 2016. It offers a maximum machining diameter of 290 mm and machining length of 560 mm, with a 70 mm bar capacity. The main spindle reaches 4,000 rpm, and the machine has a 12-position turret with 12 live-tooling positions. For turning capabilities, consider the Biglia B565 horizontal turning machine we have for sale. Contact us for further details.Max. machining diameter: 290 mm

Max. machining length: 560 mm

Max. swing over diameter: 580 mm

Main spindle:
Nose: ASA 6"

Bore: 76 mm

Inside diameter of bearings: 110 mm

Chuck diameter: 210/250 mm

Motor torque: 189/223 Nm

Sub-spindle:
Max. speed: 5000 rpm

Nose: ASA 5"

Bore: 55 mm

Drawtube inside diameter: 45 mm

Inside diameter of bearings: 90 mm

Chuck diameter: 140/165 mm

Motor power: 7.5/11 kW

Motor torque: 76/112 Nm

B-axis rapid traverse: 30 m/min

Turret:
Tool shank for OD/ID turning: 20 x 20 - 25 x 25 - Ø 32 mm

Indexing time (1 pos): 0.15 sec

Live tooling:
Number of positions: 12

Max. speed: 3000 rpm

Motor power: 3.7 kW

Motor torque: 47 Nm

C-axis:
Min. programmable value: 0.001

Max. rapid traverse: 100 rpm

Axes:
B-axis stroke: 490 mm

X-axis rapid traverse: 20 m/min

Z-axis rapid traverse: 24 m/min

Tailstock:
Morse taper: C.M. 5/4

B-axis rapid traverse: 15 m/min

Cooling system:
Tank capacity: 250 L

Pump nominal displacement: 230 L/min

Electropump motor rating: 1.5 kW

Spindle centre height: 1000 mm

Additional equipment

Swarf conveyor (chip/chip removal conveyor)

Counter Spindle: yes
Driven Tools: yes
Machine Height: 2125 mm
Machine Length: 4487 mm
Machine Weight: 4850 kg
Machine Width: 1901 mm
Max. Bar Diameter: 70 mm
Number of Axes: 4
Tool Stations: 12
Spindle Power: 26 kW
Spindle Speed: 4000 RPM
X-axis Travel: 170 mm
Z-axis Travel: 560 mm

Description provided by the seller (translated automatically). We recommend organizing a visit or a video call to confirm the details before you buy.


Client type Machinery dealer
Active since 2019
Offers online 2034
Last activity Nov. 21, 2026

GINDUMAC GmbH Top seller

GINDUMAC GmbH is a dynamic German company specializing in the global trade of used industrial machinery. Our international team of more than 30 employees supports manufacturers worldwide in buying and selling high-quality used equipment across sectors such as metalworking, sheet metal, plastics, woodworking, and automation.

Through a data-driven, digital approach, the company delivers accurate machine valuations, professional inspections, and end-to-end transaction management — ensuring a transparent, secure, and efficient sales process for both buyers and sellers.

GINDUMAC GmbH

Seller's description

This 4-axis Biglia B565 was manufactured in 2016. It offers a maximum machining diameter of 290 mm and machining length of 560 mm, with a 70 mm bar capacity. The main spindle reaches 4,000 rpm, and the machine has a 12-position turret with 12 live-tooling positions. For turning capabilities, consider the Biglia B565 horizontal turning machine we have for sale. Contact us for further details.Max. machining diameter: 290 mm

Max. machining length: 560 mm

Max. swing over diameter: 580 mm

Main spindle:
Nose: ASA 6"

Bore: 76 mm

Inside diameter of bearings: 110 mm

Chuck diameter: 210/250 mm

Motor torque: 189/223 Nm

Sub-spindle:
Max. speed: 5000 rpm

Nose: ASA 5"

Bore: 55 mm

Drawtube inside diameter: 45 mm

Inside diameter of bearings: 90 mm

Chuck diameter: 140/165 mm

Motor power: 7.5/11 kW

Motor torque: 76/112 Nm

B-axis rapid traverse: 30 m/min

Turret:
Tool shank for OD/ID turning: 20 x 20 - 25 x 25 - Ø 32 mm

Indexing time (1 pos): 0.15 sec

Live tooling:
Number of positions: 12

Max. speed: 3000 rpm

Motor power: 3.7 kW

Motor torque: 47 Nm

C-axis:
Min. programmable value: 0.001

Max. rapid traverse: 100 rpm

Axes:
B-axis stroke: 490 mm

X-axis rapid traverse: 20 m/min

Z-axis rapid traverse: 24 m/min

Tailstock:
Morse taper: C.M. 5/4

B-axis rapid traverse: 15 m/min

Cooling system:
Tank capacity: 250 L

Pump nominal displacement: 230 L/min

Electropump motor rating: 1.5 kW

Spindle centre height: 1000 mm

Additional equipment

Swarf conveyor (chip/chip removal conveyor)

Counter Spindle: yes
Driven Tools: yes
Machine Height: 2125 mm
Machine Length: 4487 mm
Machine Weight: 4850 kg
Machine Width: 1901 mm
Max. Bar Diameter: 70 mm
Number of Axes: 4
Tool Stations: 12
Spindle Power: 26 kW
Spindle Speed: 4000 RPM
X-axis Travel: 170 mm
Z-axis Travel: 560 mm

Description provided by the seller (translated automatically). We recommend organizing a visit or a video call to confirm the details before you buy.


Specifications

Category Lathes - CNC lathes
Turning length 560 mm
Turning Ø 290 mm
Ø above the bed 580 mm
Type of CNC
X-axis 170 mm
Z-axis 560 mm
Spindle taper ASA 6
Spindle bore 76 mm
Number of turrets 12
Number of tools on turret 12
Number of rotating tools 12
Turning speed 4000 rpm
Spindle motor power 26 kW
Tailstock yes
Bar feeder no
Length x width x height 4487.0 × 1901.0 × 2125.0
Weight 4850 kg
worked hours
hours under power
state as-is, where-is
At local norms ---------
status
Datasheet Biglia B565M
Last availability date 20/11/2026
Product id P261119177
Language

Automatic description (AI-Generated)

This 2016 Biglia B565 is an enclosed CNC lathe with a 4-axis configuration. It has a stated turning diameter of 290 mm, turning length of 560 mm and swing above the bed of 580 mm. The machine measures 4,487 × 1,901 × 2,125 mm and weighs 4,850 kg.

The main spindle has a 76 mm bore, reaches 4,000 rpm and is driven by a 26 kW motor. The machine is equipped with a 12-position turret and 12 rotating-tool positions. X-axis travel is 170 mm and Z-axis travel is 560 mm. The current description also lists a 70 mm maximum bar diameter, a counter spindle, driven tools and a swarf conveyor.

The machining area is enclosed, with a chuck and multi-position turret. A CNC control with display, keypad and buttons is mounted at the front right; the control is identified as a FANUC Series 32i-Model B. Toolholders and cutting tools are fitted in the turret, and coolant hoses are present in the work area.

Visible machining residue, chips, grime and streaking are present on interior and exterior surfaces, including around the chuck and turret. No workpiece is shown in the machining area. The description does not make any claim about the machine’s operating condition.

The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.


About this seller

Client type Machinery dealer
Active since 2019
Offers online 2034
Last activity Nov. 21, 2026

GINDUMAC GmbH Top seller

GINDUMAC GmbH is a dynamic German company specializing in the global trade of used industrial machinery. Our international team of more than 30 employees supports manufacturers worldwide in buying and selling high-quality used equipment across sectors such as metalworking, sheet metal, plastics, woodworking, and automation.

Through a data-driven, digital approach, the company delivers accurate machine valuations, professional inspections, and end-to-end transaction management — ensuring a transparent, secure, and efficient sales process for both buyers and sellers.

GINDUMAC GmbH

Here is a selection of similar machines - Biglia B565


Used CNC Lathes in Italy for Sale

Browse used CNC lathes located in Italy on Exapro, from Biglia turning centres to Mazak, Okuma, Doosan and DMG Mori lathes used by valve, fitting and automotive subcontractors. Filter by swing, bar capacity and driven tools to source turning capacity.

Biglia B565 CNC lathe