Contact us to receive an offer.
| Manufacturer | BATTENFELD |
|---|---|
| Model | SmartPower 210/1330 Unilog B8 |
| Year | 2021 |
| Location | Turkey
|
The Battenfeld SmartPower 210/1330 Unilog B8 is a servo-hydraulic injection molding machine designed for precise and efficient plastic molding operations. It features a robust clamping force of 210 tons (2100 kN) and tie bar spacing of 670 mm horizontally and 620 mm vertically, providing a stable and spacious clamping area. The machine accommodates molds with a minimum height of 350 mm and a maximum daylight opening of 1100 mm, with an opening stroke of 750 mm and a pusher stroke of 200 mm. It delivers a propulsion force of 65 kN to facilitate material ejection.
The injection unit is equipped with a 55 mm diameter screw, with a length-to-diameter ratio of 22, enabling precise plasticization. It offers a theoretical shot volume of 653 cm³ and a shot weight of approximately 594 grams. The machine operates at a specific injection pressure of 2041 bar, ensuring consistent material injection quality.
Electrical specifications include a voltage configuration of 230/400V with three phases plus neutral, supporting 50Hz frequency. The control panel features a 21.5-inch multi-touch Full-HD display, enhancing user interface and operation control.
From the images, the machine has a blue and white body and includes an attached hopper with a white cylindrical container on top, connected by flexible tubes to the machine. The control panel with visible display and buttons is integrated for operational management. The machine and its surrounding area appear clean, well-maintained, and organized, indicating good upkeep. Accessories observed include an orange glove and a red scoop placed on the machine surface.
This model was manufactured in 2021 and is labeled in Turkish, suitable for users familiar with this language. Overall, the Battenfeld SmartPower 210/1330 Unilog B8 offers a comprehensive set of features for industrial plastic injection molding applications, combining substantial clamping force with advanced injection capabilities and user-friendly controls.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
SMARTPOWER 210 Ton ServoHydraulic Plastic Injection Machine
Injection Molding Machine Base Data
SmartPower 210/1330 UNILOG B8
Clamp Group Technical Data
Locking Tonnage: 2100 kN
Spacing between columns: (HxV): 670x620mm
Min. Mold Height: 350mm
Max. Daylight (Distance Between Plates): 1100mm
Opening Stroke: 750mm
pusher stroke: 200mm
Propulsion Force: 65kN
Injection Group Technical Data
Injection Unit: 1330
Screw Diameter: 55mm
Screw L/D Ratio (Diameter/Length): 22
Specific Injection Pressure: 2041 bar
Theoretical Printing Volume: 653 cm3
Max. Plasticization Rate (PS): 594 gg
General Technical Data
voltage: 230/400V/3p+N-TN/TT
50Hz Color: Standard 7047/5002
Labeling: Turkish
Display Text: Turkish
Manual: Turkish
Panel 1: 125.0A
Multi-touch 21.5" Full-HD display
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Factory – large company |
| Active since | 2023 |
| Offers online | 6 |
| Last activity | Oct. 21, 2026 |
SMARTPOWER 210 Ton ServoHydraulic Plastic Injection Machine
Injection Molding Machine Base Data
SmartPower 210/1330 UNILOG B8
Clamp Group Technical Data
Locking Tonnage: 2100 kN
Spacing between columns: (HxV): 670x620mm
Min. Mold Height: 350mm
Max. Daylight (Distance Between Plates): 1100mm
Opening Stroke: 750mm
pusher stroke: 200mm
Propulsion Force: 65kN
Injection Group Technical Data
Injection Unit: 1330
Screw Diameter: 55mm
Screw L/D Ratio (Diameter/Length): 22
Specific Injection Pressure: 2041 bar
Theoretical Printing Volume: 653 cm3
Max. Plasticization Rate (PS): 594 gg
General Technical Data
voltage: 230/400V/3p+N-TN/TT
50Hz Color: Standard 7047/5002
Labeling: Turkish
Display Text: Turkish
Manual: Turkish
Panel 1: 125.0A
Multi-touch 21.5" Full-HD display
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
The Battenfeld SmartPower 210/1330 Unilog B8 is a servo-hydraulic injection molding machine designed for precise and efficient plastic molding operations. It features a robust clamping force of 210 tons (2100 kN) and tie bar spacing of 670 mm horizontally and 620 mm vertically, providing a stable and spacious clamping area. The machine accommodates molds with a minimum height of 350 mm and a maximum daylight opening of 1100 mm, with an opening stroke of 750 mm and a pusher stroke of 200 mm. It delivers a propulsion force of 65 kN to facilitate material ejection.
The injection unit is equipped with a 55 mm diameter screw, with a length-to-diameter ratio of 22, enabling precise plasticization. It offers a theoretical shot volume of 653 cm³ and a shot weight of approximately 594 grams. The machine operates at a specific injection pressure of 2041 bar, ensuring consistent material injection quality.
Electrical specifications include a voltage configuration of 230/400V with three phases plus neutral, supporting 50Hz frequency. The control panel features a 21.5-inch multi-touch Full-HD display, enhancing user interface and operation control.
From the images, the machine has a blue and white body and includes an attached hopper with a white cylindrical container on top, connected by flexible tubes to the machine. The control panel with visible display and buttons is integrated for operational management. The machine and its surrounding area appear clean, well-maintained, and organized, indicating good upkeep. Accessories observed include an orange glove and a red scoop placed on the machine surface.
This model was manufactured in 2021 and is labeled in Turkish, suitable for users familiar with this language. Overall, the Battenfeld SmartPower 210/1330 Unilog B8 offers a comprehensive set of features for industrial plastic injection molding applications, combining substantial clamping force with advanced injection capabilities and user-friendly controls.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Factory – large company |
| Active since | 2023 |
| Offers online | 6 |
| Last activity | Oct. 21, 2026 |
Germany
2007
| Robot interface |
|---|
| Mould size |
|---|
| Clamping force | 250 T |
|---|---|
| Tie bar spacing (H) | 685 mm |
| Shot weight | 679 g |
| Platen length | 1005 mm |
| Bi-metal screw | No |
| Robot interface | |
| Number of heating zones | 6 |
| Mould size | 280-700 |
| Screw diameter | 60 mm |
|---|---|
| Tie bar spacing (V) | 735 mm |
| Pressure on material | 998 bar |
| Platen width | 950 mm |
| Equipped with robot | No |
| Number of cores | 4 |
| Opening of the press | 550 mm |
Romania
2005
| Clamping force | 100 T |
|---|---|
| Tie bar spacing (H) | 420 mm |
| Shot volume | 169 cm³ |
| Pressure on material | 2083 bar |
| Platen width | 640 mm |
| Opening of the press | 830 mm |
| Screw diameter | 35 mm |
|---|---|
| Tie bar spacing (V) | 420 mm |
| Shot weight | 153 g |
| Platen length | 640 mm |
| Robot interface | |
| Mould size |
| Clamping force | 450 T |
|---|---|
| Tie bar spacing (H) | 800 mm |
| Shot volume | 1657 cm³ |
| Pressure on material | 1739 bar |
| Platen width | 1119 mm |
| Robot interface | |
| Opening of the press | 760 mm |
| Screw diameter | 75 mm |
|---|---|
| Tie bar spacing (V) | 800 mm |
| Shot weight | 1508 g |
| Platen length | 1120 mm |
| Equipped with robot | No |
| Number of cores | 1 |
| Mould size | 300 |
| Clamping force | 1000 T |
|---|---|
| Tie bar spacing (H) | 1960 mm |
| Shot volume | 5655 cm³ |
| Pressure on material | 1361 bar |
| Platen width | 1960 mm |
| Robot interface | |
| Number of heating zones | 8 |
| Mould size |
| Screw diameter | 120 mm |
|---|---|
| Tie bar spacing (V) | 1690 mm |
| Shot weight | 5146 g |
| Platen length | 1960 mm |
| Equipped with robot | Yes |
| Number of cores | 2 |
| Opening of the press | 1300 mm |
Czech Republic
2016
| Clamping force | 160 T |
|---|---|
| Tie bar spacing (V) | 520 mm |
| Opening of the press | 650 mm |
| Tie bar spacing (H) | 570 mm |
|---|---|
| Robot interface | |
| Mould size |
| Clamping force | 300 T |
|---|---|
| Tie bar spacing (H) | 1030 mm |
| Shot volume | 1078 cm³ |
| Pressure on material | 2075 bar |
| Platen width | 1350 mm |
| Equipped with robot | Yes |
| Number of cores | 3 |
| Opening of the press | 900 mm |
| Screw diameter | 65 mm |
|---|---|
| Tie bar spacing (V) | 1100 mm |
| Shot weight | 1307 g |
| Platen length | 1450 mm |
| Bi-metal screw | Yes |
| Robot interface | Unilog B6S |
| Number of heating zones | |
| Mould size | 225mm |
| Clamping force | 60 T |
|---|---|
| Tie bar spacing (H) | 370 mm |
| Shot volume | 106 cm³ |
| Pressure on material | 2042 bar |
| Platen width | 530 mm |
| Number of cores | |
| Opening of the press | 450 mm |
| Screw diameter | 30 mm |
|---|---|
| Tie bar spacing (V) | 320 mm |
| Shot weight | 100 g |
| Platen length | 550 mm |
| Robot interface | |
| Number of heating zones | |
| Mould size |
Poland
2015
| Clamping force | 400 T |
|---|---|
| Equipped with robot | Yes |
| Mould size |
| Screw diameter | 85 mm |
|---|---|
| Robot interface |
Poland
2017
| Screw diameter | 85 mm |
|---|---|
| Robot interface |
| Equipped with robot | Yes |
|---|---|
| Mould size |
| Clamping force | 500 T |
|---|---|
| Tie bar spacing (H) | 320 mm |
| Shot volume | 106 cm³ |
| Platen length | 640 mm |
| Robot interface | |
| Mould size | 640 x 640 |
| Screw diameter | 30 mm |
|---|---|
| Tie bar spacing (V) | 320 mm |
| Shot weight | 95 g |
| Platen width | 640 mm |
| Opening of the press | 600 mm |
| Clamping force | 6 T |
|---|---|
| Robot interface |
| Screw diameter | 40 mm |
|---|---|
| Mould size |
| Clamping force | 500 T |
|---|---|
| Tie bar spacing (H) | 815 mm |
| Shot volume | 1154 cm³ |
| Pressure on material | 2145 bar |
| Platen width | 1200 mm |
| Opening of the press | 900 mm |
| Screw diameter | 70 mm |
|---|---|
| Tie bar spacing (V) | 815 mm |
| Shot weight | 1050 g |
| Platen length | 1200 mm |
| Robot interface | |
| Mould size |
| Clamping force | 160 T |
|---|---|
| Tie bar spacing (H) | 570 mm |
| Shot weight | 318 g |
| Mould size |
| Screw diameter | 45 mm |
|---|---|
| Tie bar spacing (V) | 520 mm |
| Robot interface |
| Clamping force | 1600 T |
|---|---|
| Tie bar spacing (H) | 1800 mm |
| Shot volume | 8588 cm³ |
| Pressure on material | 1394 bar |
| Platen width | 2070 mm |
| Opening of the press | 3400 mm |
| Screw diameter | 130 mm |
|---|---|
| Tie bar spacing (V) | 1400 mm |
| Shot weight | 7815 g |
| Platen length | 2470 mm |
| Robot interface | |
| Mould size |
| Clamping force | 130 T |
|---|---|
| Robot interface |
| Equipped with robot | Yes |
|---|---|
| Mould size |
| Clamping force | 500 T |
|---|---|
| Tie bar spacing (H) | 800 mm |
| Shot weight | 1937 g |
| Platen length | 1590 mm |
| Robot interface | EUROMAP 67 |
| Opening of the press | 1600 mm |
| Screw diameter | 85 mm |
|---|---|
| Tie bar spacing (V) | 1000 mm |
| Pressure on material | 1574 bar |
| Platen width | 1470 mm |
| Number of cores | 2 |
| Mould size |
| Clamping force | 400 T |
|---|---|
| Tie bar spacing (H) | 710 mm |
| Shot volume | 2128 cm³ |
| Pressure on material | 1574 bar |
| Opening of the press | 1380 mm |
| Screw diameter | 85 mm |
|---|---|
| Tie bar spacing (V) | 710 mm |
| Shot weight | 1936 g |
| Robot interface | |
| Mould size | 710x710 |
| Clamping force | 60 T |
|---|---|
| Robot interface |
| Pressure on material | 210 bar |
|---|---|
| Mould size |
| Clamping force | 45 T |
|---|---|
| Tie bar spacing (H) | 320 mm |
| Pressure on material | 1500 bar |
| Opening of the press | 375 mm |
| Screw diameter | 35 mm |
|---|---|
| Tie bar spacing (V) | 270 mm |
| Robot interface | |
| Mould size | 175 |
| Clamping force | 180 T |
|---|---|
| Shot volume | 358 cm³ |
| Equipped with robot | Yes |
| Mould size |
| Screw diameter | 45 mm |
|---|---|
| Bi-metal screw | No |
| Robot interface | euromap 67 |
| Screw diameter | 55 mm |
|---|---|
| Tie bar spacing (V) | 570 mm |
| Mould size |
| Tie bar spacing (H) | 630 mm |
|---|---|
| Robot interface |
| Clamping force | 250 T |
|---|---|
| Tie bar spacing (H) | 550 mm |
| Robot interface |
| Screw diameter | 65 mm |
|---|---|
| Tie bar spacing (V) | 570 mm |
| Mould size |
| Screw diameter | 65 mm |
|---|---|
| Mould size |
| Robot interface |
|---|
| Clamping force | 5 T |
|---|---|
| Tie bar spacing (H) | 196 mm |
| Shot volume | 1.1 cm³ |
| Pressure on material | 2500 bar |
| Platen width | 196 mm |
| Equipped with robot | Yes |
| Opening of the press | 200 mm |
| Screw diameter | 14 mm |
|---|---|
| Tie bar spacing (V) | 156 mm |
| Shot weight | 1 g |
| Platen length | 364 mm |
| Bi-metal screw | No |
| Robot interface | |
| Mould size | 100 |
| Clamping force | 160 T |
|---|---|
| Mould size |
| Robot interface |
|---|
| Clamping force | 130 T |
|---|---|
| Tie bar spacing (H) | 460 mm |
| Shot volume | 442 cm³ |
| Pressure on material | 1714 bar |
| Platen width | 670 mm |
| Number of cores | |
| Opening of the press | 430 mm |
| Screw diameter | 50 mm |
|---|---|
| Tie bar spacing (V) | 470 mm |
| Shot weight | 201 g |
| Platen length | 670 mm |
| Robot interface | |
| Number of heating zones | |
| Mould size |
United Kingdom
2020
| Clamping force | 300 T |
|---|---|
| Tie bar spacing (V) | 800 mm |
| Robot interface |
| Tie bar spacing (H) | 720 mm |
|---|---|
| Shot weight | 991 g |
| Mould size |
United Kingdom
1999
| Clamping force | 100 T |
|---|---|
| Robot interface |
| Shot weight | 140 g |
|---|---|
| Mould size | 420 x 420 |
United Kingdom
2008
| Clamping force | 150 T |
|---|---|
| Robot interface |
| Shot weight | 257 g |
|---|---|
| Mould size |
Машина за леене под налягане BATTENFELD SmartPower 210/1330 Unilog B8
Vstřikolis BATTENFELD SmartPower 210/1330 Unilog B8
BATTENFELD SmartPower 210/1330 Unilog B8 Sprøjtestøbemaskine
BATTENFELD SmartPower 210/1330 Unilog B8 Spritzgießmaschine
Μηχανή χύτευσης με έγχυση BATTENFELD SmartPower 210/1330 Unilog B8
BATTENFELD SmartPower 210/1330 Unilog B8 Injection moulding machine 210 ton
Inyectora de plástico BATTENFELD SmartPower 210/1330 Unilog B8
Presse à injecter BATTENFELD SmartPower 210/1330 Unilog B8
Stroj za injekcijsko prešanje BATTENFELD SmartPower 210/1330 Unilog B8
BATTENFELD SmartPower 210/1330 Unilog B8 Fröccsöntő gép
Pressa ad iniezione BATTENFELD SmartPower 210/1330 Unilog B8
Įpurškimo formavimo mašina BATTENFELD SmartPower 210/1330 Unilog B8
BATTENFELD SmartPower 210/1330 Unilog B8 Spuitgietmachine
Wtryskarka BATTENFELD SmartPower 210/1330 Unilog B8
Máquina de injecção BATTENFELD SmartPower 210/1330 Unilog B8
Mașină de turnat prin injecție BATTENFELD SmartPower 210/1330 Unilog B8
BATTENFELD SmartPower 210/1330 Unilog B8 Термопластавтомат
Mašina za brizganje BATTENFELD SmartPower 210/1330 Unilog B8
BATTENFELD SmartPower 210/1330 Unilog B8 Formsprutningsmaskin
Enjeksiyon kalıplama makinesi BATTENFELD SmartPower 210/1330 Unilog B8
France
Albania
Bulgaria
Spain
Italy
EN
- Languages
English (GB)