Contact us to receive an offer.
| Manufacturer | ATMSOLUTIONS |
|---|---|
| Model | ATMS 580X2000 SIEMENS |
| Year | 2021 |
| Location | Poland
|
This ATMSOLUTIONS ATMS 580X2000 SIEMENS CNC lathe, manufactured in 2021, is designed for precision machining with a robust spindle motor power of 7.5 kW. The machine features a straight bed with a maximum turning length of 1970 mm and a turning diameter above the bed of 600 mm, allowing for substantial workpiece sizes. The clearance over the transversing slide is 400 mm in diameter, providing good accessibility for various machining operations.
The lathe's axis movement ranges are 370 mm on the X-axis and 1970 mm on the Z-axis, with respective axis speeds of 4.8 m/min and 8 m/min. It is equipped with a 4-piece tool turret accommodating tools sized 25x25 mm, and the turret dimensions are 190x190 mm. The spindle end is A2-8 with a spindle clearance of 81 mm. The tailstock features a sleeve diameter of 75 mm, a pin range of 140 mm, and a quill end taper of MT5, which can be removed as needed.
Control is managed via a Siemens 808 system, housed in a ventilated control cabinet to ensure optimal operating conditions. Additional features include a sliding operator panel, a hand-held speed controller with three feed rate settings, an accessory shelf located beneath the operator panel, spindle encoder, and work area illumination to enhance visibility during operations.
The machine also includes a chip conveyor attached on the right side to facilitate chip removal during machining. The protective enclosure on the left side has ventilation holes, contributing to effective cooling and safety. Overall, the lathe is presented in clean condition with no visible damage and was previously used for presentation purposes. It has a total weight of approximately 2998 kg.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Control : Siemens 808
Motor powers: X/Z :1/1,5kW
Bed : straight
Passage over bed: diameter 600 mm
Clearance over the slide: 400 mm diameter
Maximum machining length: 1970mm
Spindle end: A2-8
Spindle clearance: 81mm
Spindle motor: 7.5kW
Tailstock sleeve diameter: 75mm
Tailstock pin range: 140mm
Tailstock quill end: MT5
Number of tools in tool turret: 4 pieces
Tool size: 25x25 mm
Tool turret dimensions: 190x190
Axis speed : X: 4.8 m/min / Z: 8 m/min /.
Axis movement range : X: 370mm / Z: 1970mm
Sliding operator panel
Hand-held speed controller with three feed rate settings
Accessory shelf under the operator panel
Spindle encoder
Work area illumination
Removable tailstock
Ventilated control cabinet
Machine after warranty, used for presentation purposes.
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Machinery manufacturer |
| Active since | 2025 |
| Offers online | 7 |
| Last activity | Oct. 30, 2026 |
Control : Siemens 808
Motor powers: X/Z :1/1,5kW
Bed : straight
Passage over bed: diameter 600 mm
Clearance over the slide: 400 mm diameter
Maximum machining length: 1970mm
Spindle end: A2-8
Spindle clearance: 81mm
Spindle motor: 7.5kW
Tailstock sleeve diameter: 75mm
Tailstock pin range: 140mm
Tailstock quill end: MT5
Number of tools in tool turret: 4 pieces
Tool size: 25x25 mm
Tool turret dimensions: 190x190
Axis speed : X: 4.8 m/min / Z: 8 m/min /.
Axis movement range : X: 370mm / Z: 1970mm
Sliding operator panel
Hand-held speed controller with three feed rate settings
Accessory shelf under the operator panel
Spindle encoder
Work area illumination
Removable tailstock
Ventilated control cabinet
Machine after warranty, used for presentation purposes.
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
This ATMSOLUTIONS ATMS 580X2000 SIEMENS CNC lathe, manufactured in 2021, is designed for precision machining with a robust spindle motor power of 7.5 kW. The machine features a straight bed with a maximum turning length of 1970 mm and a turning diameter above the bed of 600 mm, allowing for substantial workpiece sizes. The clearance over the transversing slide is 400 mm in diameter, providing good accessibility for various machining operations.
The lathe's axis movement ranges are 370 mm on the X-axis and 1970 mm on the Z-axis, with respective axis speeds of 4.8 m/min and 8 m/min. It is equipped with a 4-piece tool turret accommodating tools sized 25x25 mm, and the turret dimensions are 190x190 mm. The spindle end is A2-8 with a spindle clearance of 81 mm. The tailstock features a sleeve diameter of 75 mm, a pin range of 140 mm, and a quill end taper of MT5, which can be removed as needed.
Control is managed via a Siemens 808 system, housed in a ventilated control cabinet to ensure optimal operating conditions. Additional features include a sliding operator panel, a hand-held speed controller with three feed rate settings, an accessory shelf located beneath the operator panel, spindle encoder, and work area illumination to enhance visibility during operations.
The machine also includes a chip conveyor attached on the right side to facilitate chip removal during machining. The protective enclosure on the left side has ventilation holes, contributing to effective cooling and safety. Overall, the lathe is presented in clean condition with no visible damage and was previously used for presentation purposes. It has a total weight of approximately 2998 kg.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery manufacturer |
| Active since | 2025 |
| Offers online | 7 |
| Last activity | Oct. 30, 2026 |
cnc струг ATMSOLUTIONS ATMS 580X2000 SIEMENS
Soustruh cnc ATMSOLUTIONS ATMS 580X2000 SIEMENS
ATMSOLUTIONS ATMS 580X2000 SIEMENS cnc drejebænk
ATMSOLUTIONS ATMS 580X2000 SIEMENS Drehmaschine CNC
cnc τόρνος ATMSOLUTIONS ATMS 580X2000 SIEMENS
ATMSOLUTIONS ATMS 580X2000 SIEMENS cnc lathe
Torno cnc ATMSOLUTIONS ATMS 580X2000 SIEMENS
Tour cnc ATMSOLUTIONS ATMS 580X2000 SIEMENS
cnc tokarski stroj ATMSOLUTIONS ATMS 580X2000 SIEMENS
ATMSOLUTIONS ATMS 580X2000 SIEMENS cnc eszterga
Tornio cnc ATMSOLUTIONS ATMS 580X2000 SIEMENS
cnc tekinimo staklės ATMSOLUTIONS ATMS 580X2000 SIEMENS
ATMSOLUTIONS ATMS 580X2000 SIEMENS cnc-draaibank
Tokarka CNC ATMSOLUTIONS ATMS 580X2000 SIEMENS
Torno CNC ATMSOLUTIONS ATMS 580X2000 SIEMENS
strung cnc ATMSOLUTIONS ATMS 580X2000 SIEMENS
ATMSOLUTIONS ATMS 580X2000 SIEMENS Токарный станок с ЧПУ
cnc strug ATMSOLUTIONS ATMS 580X2000 SIEMENS
ATMSOLUTIONS ATMS 580X2000 SIEMENS cnc svarv
Cnc torna ATMSOLUTIONS ATMS 580X2000 SIEMENS
EN
- Languages
English (GB)