Price on request
Make an offer| Clamping force | 150 T |
| Screw diameter | 35 mm |
| Tie bar spacing (H) | 520 mm |
| Tie bar spacing (V) | 520 mm |
| Shot weight | 141 g |
| Pressure on material | 2000 bar |
| Platen length | 688 mm |
| Platen width | 688 mm |
| Robot interface | TAK |
| Number of cores | 2 |
| Number of heating zones | 6 |
| Mould size | 250 |
| ------------------- | |
| Weight | 6490 kg |
| worked hours | 45343 hours |
| hours under power | |
| state | excellent |
| At local norms | --------- |
| status | visible |
| Last availability date | 23/01/2026 |
This Arburg 520S-1500-400 injection molding machine, manufactured in 2008, offers robust performance with a clamping force of 150 tons (1,500 kN) and an injection weight capacity of 141 grams. The machine features a screw diameter of 35 mm and can exert an injection pressure of up to 2,000 bar, suitable for precise molding tasks. Its platen dimensions measure 688 mm by 688 mm, with tie bar spacing of 520 mm both horizontally and vertically, providing ample space for various mold sizes. The minimum mold height is 250 mm.
The machine is equipped with six heating zones and two cores, allowing for controlled and efficient heating during operation. It is controlled via the Selogica control system, which supports both English and German languages. The installed power is 33.9 kW.
Measuring 4.9 meters in length and 1.7 meters in width, and weighing approximately 6,490 kg, this machine is a substantial piece of equipment suitable for industrial production environments. It includes features such as core pull, a robot socket, an air valve, and mold heating control to enhance operational flexibility.
The machine’s exterior and critical components appear clean and well-maintained with no visible damage or significant wear. The main body includes a protective enclosure and a control panel located on the right side. Hydraulic cylinders, rails, and the injection unit are visible and show no signs of damage. Hydraulic connections and cables are intact without corrosion or wear. The mold clamping plate shows slight discoloration but no significant rust or damage, indicating good overall condition.
This Arburg injection molding machine is a reliable option for manufacturers seeking a well-equipped and maintained unit for plastic part production.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Arburg 520S-1500-400
General information
Number: 217
Availability: In stock
Year of production: 2008
Manufacturer: Arburg
Technical specifications
Injection weight: 141 g
Closing force: 1,500 kN
Auger diameter: 35 mm
Injection pressure: 2,000 bar
Column spacing: 520 x 520 mm
Plate size: 688 x 688 mm
Min mold height: 250 mm
Control type: Selogica
Language: English,German
Installed power: 33.9 kW
Working hours: 45343 h
Weight: 6490 kg
Dimensions: 4.9 x 1.7 m
Hopper: No
Core pull: Yes
Robot socket: Yes
Air valve: Yes
Mold heating control: Yes
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
| Client type | Machinery dealer |
| Active since | 2011 |
| Offers online | 26 |
| Last activity | March 6, 2026 |
Arburg 520S-1500-400
General information
Number: 217
Availability: In stock
Year of production: 2008
Manufacturer: Arburg
Technical specifications
Injection weight: 141 g
Closing force: 1,500 kN
Auger diameter: 35 mm
Injection pressure: 2,000 bar
Column spacing: 520 x 520 mm
Plate size: 688 x 688 mm
Min mold height: 250 mm
Control type: Selogica
Language: English,German
Installed power: 33.9 kW
Working hours: 45343 h
Weight: 6490 kg
Dimensions: 4.9 x 1.7 m
Hopper: No
Core pull: Yes
Robot socket: Yes
Air valve: Yes
Mold heating control: Yes
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
| Clamping force | 150 T |
| Screw diameter | 35 mm |
| Tie bar spacing (H) | 520 mm |
| Tie bar spacing (V) | 520 mm |
| Shot weight | 141 g |
| Pressure on material | 2000 bar |
| Platen length | 688 mm |
| Platen width | 688 mm |
| Robot interface | TAK |
| Number of cores | 2 |
| Number of heating zones | 6 |
| Mould size | 250 |
| ------------------- | |
| Weight | 6490 kg |
| worked hours | 45343 hours |
| hours under power | |
| state | excellent |
| At local norms | --------- |
| status | visible |
| Last availability date | 23/01/2026 |
This Arburg 520S-1500-400 injection molding machine, manufactured in 2008, offers robust performance with a clamping force of 150 tons (1,500 kN) and an injection weight capacity of 141 grams. The machine features a screw diameter of 35 mm and can exert an injection pressure of up to 2,000 bar, suitable for precise molding tasks. Its platen dimensions measure 688 mm by 688 mm, with tie bar spacing of 520 mm both horizontally and vertically, providing ample space for various mold sizes. The minimum mold height is 250 mm.
The machine is equipped with six heating zones and two cores, allowing for controlled and efficient heating during operation. It is controlled via the Selogica control system, which supports both English and German languages. The installed power is 33.9 kW.
Measuring 4.9 meters in length and 1.7 meters in width, and weighing approximately 6,490 kg, this machine is a substantial piece of equipment suitable for industrial production environments. It includes features such as core pull, a robot socket, an air valve, and mold heating control to enhance operational flexibility.
The machine’s exterior and critical components appear clean and well-maintained with no visible damage or significant wear. The main body includes a protective enclosure and a control panel located on the right side. Hydraulic cylinders, rails, and the injection unit are visible and show no signs of damage. Hydraulic connections and cables are intact without corrosion or wear. The mold clamping plate shows slight discoloration but no significant rust or damage, indicating good overall condition.
This Arburg injection molding machine is a reliable option for manufacturers seeking a well-equipped and maintained unit for plastic part production.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2011 |
| Offers online | 26 |
| Last activity | March 6, 2026 |
Машина за леене под налягане Arburg 520S-1500-400
Vstřikolis Arburg 520S-1500-400
Arburg 520S-1500-400 Sprøjtestøbemaskine
Arburg 520S-1500-400 Spritzgießmaschine
Μηχανή χύτευσης με έγχυση Arburg 520S-1500-400
Arburg 520S-1500-400 Injection moulding machine
Inyectora de plástico Arburg 520S-1500-400
Presse à injecter Arburg 520S-1500-400
Stroj za injekcijsko prešanje Arburg 520S-1500-400
Arburg 520S-1500-400 Fröccsöntő gép
Pressa ad iniezione Arburg 520S-1500-400
Įpurškimo formavimo mašina Arburg 520S-1500-400
Arburg 520S-1500-400 Spuitgietmachine
Wtryskarka Arburg 520S-1500-400
Máquina de injecção Arburg 520S-1500-400
Mașină de turnat prin injecție Arburg 520S-1500-400
Arburg 520S-1500-400 Термопластавтомат
Mašina za brizganje Arburg 520S-1500-400
Arburg 520S-1500-400 Formsprutningsmaskin
Enjeksiyon kalıplama makinesi Arburg 520S-1500-400
EN
- Languages
English (GB)