Price on request
Make an offer| ------------------- | |
| Length x width x height | 410.0 × 370.0 × 300.0 |
| Weight | 48 kg |
| worked hours | |
| hours under power | |
| state | as-is, where-is |
| At local norms | --------- |
| status | |
| Last availability date | 13/05/2026 |
This dividing head, manufactured by Zur Startseite wechseln, is designed for precision machining tasks. It features a center height of 100 mm and a gear ratio of 40:1, allowing for accurate indexing and positioning. The spindle mount is SK 40 with an M16 clamping thread, providing secure attachment for various tooling. The clamping surface measures 240 x 200 mm, with a hole pattern of 210 x 125 mm featuring 14 mm diameter holes, suitable for versatile mounting configurations.
Included with the dividing head is a 3-jaw chuck with a diameter of 125 mm, equipped with stepped jaws to accommodate different workpiece sizes securely. The device comes with a crank that has a perforated disc for indexing, as well as a crank with a swiveling perforated disc for direct parting operations. There are three perforated discs included, each with various hole counts to enable different indexing divisions: one with 15, 18, 21, 29, 37, 43, and 51 holes; another with 16, 19, 23, 31, 39, 47, and 53 holes; and a third with 17, 20, 27, 33, 41, 49, and 57 holes.
The dividing head allows 24-position indexing in 15° increments, with a scale on the work spindle for easy reference. Additionally, the entire dividing head assembly can rotate and tilt on its base plate, enhancing its versatility for complex machining angles.
The unit measures 410 mm in length, 370 mm in width, and 300 mm in height, with a weight of 48 kg. The dividing head is painted green and shows some wear and paint chipping on the surface, indicative of prior use but generally in good condition. The included chuck and hand crank are visibly intact and functional components of the unit.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Dividing Head
Center height: 100 mm
Gear ratio: 40:1
Spindle mount: SK 40 with M16 clamping thread
Clamping surface: 240 x 200 mm
Hole pattern on clamping surface: 210 x 125 mm, Ø 14 mm
- 3-jaw chuck Ø 125 mm with stepped jaws
- Crank with perforated disc and shear
- Crank with swiveling perforated disc for direct parting
- 1 perforated disc with 15, 18, 21, 29, 37, 43, 51 holes
- 1 perforated disc with hole counts 16, 19, 23, 31, 39, 47, 53
- 1 perforated disc with hole counts 17, 20, 27, 33, 41, 49, 57
- 24-position indexing = 15° increments, scale on the work spindle
- Complete dividing head rotates and tilts on the base plate
Dimensions L x W x H 410 x 370 x 300
Weight: 48 kg
Good condition
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
| Client type | Machinery dealer |
| Active since | 2011 |
| Offers online | 95 |
| Last activity | May 13, 2026 |
Dividing Head
Center height: 100 mm
Gear ratio: 40:1
Spindle mount: SK 40 with M16 clamping thread
Clamping surface: 240 x 200 mm
Hole pattern on clamping surface: 210 x 125 mm, Ø 14 mm
- 3-jaw chuck Ø 125 mm with stepped jaws
- Crank with perforated disc and shear
- Crank with swiveling perforated disc for direct parting
- 1 perforated disc with 15, 18, 21, 29, 37, 43, 51 holes
- 1 perforated disc with hole counts 16, 19, 23, 31, 39, 47, 53
- 1 perforated disc with hole counts 17, 20, 27, 33, 41, 49, 57
- 24-position indexing = 15° increments, scale on the work spindle
- Complete dividing head rotates and tilts on the base plate
Dimensions L x W x H 410 x 370 x 300
Weight: 48 kg
Good condition
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
| ------------------- | |
| Length x width x height | 410.0 × 370.0 × 300.0 |
| Weight | 48 kg |
| worked hours | |
| hours under power | |
| state | as-is, where-is |
| At local norms | --------- |
| status | |
| Last availability date | 13/05/2026 |
This dividing head, manufactured by Zur Startseite wechseln, is designed for precision machining tasks. It features a center height of 100 mm and a gear ratio of 40:1, allowing for accurate indexing and positioning. The spindle mount is SK 40 with an M16 clamping thread, providing secure attachment for various tooling. The clamping surface measures 240 x 200 mm, with a hole pattern of 210 x 125 mm featuring 14 mm diameter holes, suitable for versatile mounting configurations.
Included with the dividing head is a 3-jaw chuck with a diameter of 125 mm, equipped with stepped jaws to accommodate different workpiece sizes securely. The device comes with a crank that has a perforated disc for indexing, as well as a crank with a swiveling perforated disc for direct parting operations. There are three perforated discs included, each with various hole counts to enable different indexing divisions: one with 15, 18, 21, 29, 37, 43, and 51 holes; another with 16, 19, 23, 31, 39, 47, and 53 holes; and a third with 17, 20, 27, 33, 41, 49, and 57 holes.
The dividing head allows 24-position indexing in 15° increments, with a scale on the work spindle for easy reference. Additionally, the entire dividing head assembly can rotate and tilt on its base plate, enhancing its versatility for complex machining angles.
The unit measures 410 mm in length, 370 mm in width, and 300 mm in height, with a weight of 48 kg. The dividing head is painted green and shows some wear and paint chipping on the surface, indicative of prior use but generally in good condition. The included chuck and hand crank are visibly intact and functional components of the unit.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2011 |
| Offers online | 95 |
| Last activity | May 13, 2026 |
Отиди на началната страница Частично устройство с манивела и перфорирана шайба + 3-челюстен патрон Ø 125 мм
Přejít na domovskou stránku Dílčí přístroj s klikou a děrovaným kotoučem + 3-čelisťové upínadlo Ø 125 mm
Gå til startside Delapparat med håndsving og hulskive + 3-kæbefræs Ø 125 mm
Zur Startseite wechseln Teilapparat mit Kurbel und Lochscheibe + 3-Bachen Drehfutter Ø 125 mm
Μεταβείτε στην αρχική σελίδα Υποσυσκευή με μανιβέλα και διάτρητο δίσκο + τσοκ 3 γναθών Ø 125 mm
Switch to homepage Sub-apparatus with crank and perforated disc + 3-jaw chuck Ø 125 mm
Ir a la página principal Subaparato con manivela y disco perforado + mandril de 3 mordazas Ø 125 mm
Passer à la page d'accueil Sous-appareil avec manivelle et disque perforé + mandrin à 3 mâchoires Ø 125 mm
Idi na početnu stranicu Podaparat s ručkom i perforiranim diskom + 3-takmi stezni čeljusti Ø 125 mm
Vissza a kezdőlapra Alkészülék hajtókarral és lyukasztott tárcsával + 3 pofás tokmány Ø 125 mm
Vai alla homepage Sottoapparato con manovella e disco forato + mandrino a 3 griffe Ø 125 mm
Grįžti į pradžios puslapį Dalinė įranga su rankena ir perforuotu disku + 3 žandikaulių laikiklis Ø 125 mm
Ga naar startpagina Subapparaat met krukas en geperforeerde schijf + 3-klauwplaat Ø 125 mm
Przejdź do strony głównej Podzespół z korbką i tarczą z otworami + 3-szczękowy uchwyt Ø 125 mm
Ir para a página inicial Subaparato com manivela e disco perfurado + mandril de 3 mandíbulas Ø 125 mm
Mergi la pagina principală Sub-aparat cu manivelă și disc perforat + mandrină cu 3 fălci Ø 125 mm
Перейти на главную страницу Частичный аппарат с кривошипом и перфорированным диском + 3-х кулачковый патрон Ø 125 мм
Idi na početnu stranicu Deo-aparat sa ručicom i perforiranim diskom + 3-čeljusni stezni držač Ø 125 mm
Gå till startsidan Delapparat med vev och hålskiva + 3-käft chuck Ø 125 mm
Ana sayfaya geç Mekik kolu ve delikli diskli alt aparat + 3 pençeli mandren Ø 125 mm
EN
- Languages
English (GB)