Contact us to receive an offer.
| Manufacturer | ZPS |
|---|---|
| Model | H 63 |
| Year | 2008 |
| Location | Czech Republic
|
This listing is for a ZPS H 63 palletized machining center manufactured in 2008. The machine features a Heidenhain iTNC 530 control system and has a total machine weight of approximately 16,000 kg. The working table measures 800 mm in length and 630 mm in width, with axis travels of 1010 mm on the X-axis, 800 mm on the Y-axis, and 1010 mm on the Z-axis. It includes 102 tool pockets and supports a spindle rotation speed of up to 8,000 rpm.
The machine is equipped with a chip conveyor, axis B, and tool cooling via the spindle axis. It also features a workpiece probe (BLUM TS50) and a tool probe (BLUM MINI NT) to assist with precision machining. Additional equipment includes an oil mist extraction system (FX 7002).
Maintenance history includes the replacement of the Z-axis ball screw in 2022, the B-axis motor in 2017, the Y-axis measuring scales in 2010, and the filtration pump for the high-pressure coolant in 2009.
The machining center has a large enclosure with white and blue panels. There are visible signs of rust and dirt, particularly at the bottom of the enclosure, along with scratches and minor damage on the exterior panels. The control panel, labeled "HEDENHAIN," shows some wear and dirt marks and features warning stickers on the left side. An open door reveals part of the interior workspace and a coiled blue hose inside. Two cylindrical protrusions are visible at the bottom front, which may be part of the pallet or fixture system.
This machine is suitable for users seeking a palletized machining center with extensive tooling capacity and a range of precision features, though the exterior condition shows signs of wear consistent with use.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Characteristic:
Control system: Heidenhain iTNC 530
Hours on: 22000 h
Length of the working table: 800 mm
Width of the working table: 630 mm
Number of stack positions: 102
Maximum rotary speed of the spindle: 8000 1/min
X-Axis travels: 1010 mm
Y-Axis travels: 800 mm
Z-Axis travels: 1010 mm
Taper: ISO 50
Max. tool diameter: 125 mm
Max. tool lenght: 450 mm
Max. tool weight: 35 kg
Machine weight: 16 t
Equipment:
Chip convoyer
Axis B
Tool cooling via the spindle axis
Workpiece probe BLUM TS50
Tool probe BLUM MINI NT
Oil mist extraction FX 7002
2022 – Replacement of the Z-axis ball screw
2017 – Replacement of the B-axis motor
2010 – Replacement of the Y-axis measuring scales
2009 – Replacement of the filtration pump for high-pressure coolant
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Machinery dealer |
| Active since | 2008 |
| Offers online | 1158 |
| Last activity | Nov. 2, 2026 |
Characteristic:
Control system: Heidenhain iTNC 530
Hours on: 22000 h
Length of the working table: 800 mm
Width of the working table: 630 mm
Number of stack positions: 102
Maximum rotary speed of the spindle: 8000 1/min
X-Axis travels: 1010 mm
Y-Axis travels: 800 mm
Z-Axis travels: 1010 mm
Taper: ISO 50
Max. tool diameter: 125 mm
Max. tool lenght: 450 mm
Max. tool weight: 35 kg
Machine weight: 16 t
Equipment:
Chip convoyer
Axis B
Tool cooling via the spindle axis
Workpiece probe BLUM TS50
Tool probe BLUM MINI NT
Oil mist extraction FX 7002
2022 – Replacement of the Z-axis ball screw
2017 – Replacement of the B-axis motor
2010 – Replacement of the Y-axis measuring scales
2009 – Replacement of the filtration pump for high-pressure coolant
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
This listing is for a ZPS H 63 palletized machining center manufactured in 2008. The machine features a Heidenhain iTNC 530 control system and has a total machine weight of approximately 16,000 kg. The working table measures 800 mm in length and 630 mm in width, with axis travels of 1010 mm on the X-axis, 800 mm on the Y-axis, and 1010 mm on the Z-axis. It includes 102 tool pockets and supports a spindle rotation speed of up to 8,000 rpm.
The machine is equipped with a chip conveyor, axis B, and tool cooling via the spindle axis. It also features a workpiece probe (BLUM TS50) and a tool probe (BLUM MINI NT) to assist with precision machining. Additional equipment includes an oil mist extraction system (FX 7002).
Maintenance history includes the replacement of the Z-axis ball screw in 2022, the B-axis motor in 2017, the Y-axis measuring scales in 2010, and the filtration pump for the high-pressure coolant in 2009.
The machining center has a large enclosure with white and blue panels. There are visible signs of rust and dirt, particularly at the bottom of the enclosure, along with scratches and minor damage on the exterior panels. The control panel, labeled "HEDENHAIN," shows some wear and dirt marks and features warning stickers on the left side. An open door reveals part of the interior workspace and a coiled blue hose inside. Two cylindrical protrusions are visible at the bottom front, which may be part of the pallet or fixture system.
This machine is suitable for users seeking a palletized machining center with extensive tooling capacity and a range of precision features, though the exterior condition shows signs of wear consistent with use.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2008 |
| Offers online | 1158 |
| Last activity | Nov. 2, 2026 |
Палетизиран обработващ център ZPS H 63
Paletizované obráběcí centrum ZPS H 63
ZPS H 63 Palleteret bearbejdningscenter
ZPS H 63 Paletten-Bearbeitungszentrum
Παλετοποιημένο κέντρο μηχανουργικής επεξεργασίας ZPS H 63
Machining center (horizontal) ZPS H 63
Centro de mecanizado paletizado ZPS H 63
Centre d’usinage palettisé ZPS H 63
Paletizirani obradni centar ZPS H 63
ZPS H 63 Raklapozott megmunkáló központ
Centro di lavoro con cambio pallet ZPS H 63
ZPS H 63 Padėklų apdirbimo centras
ZPS H 63 Gepalletiseerd bewerkingscentrum
Centrum obróbcze z wymianą palet ZPS H 63
Centro de usinagem paletizado ZPS H 63
Centru de prelucrare paletizat ZPS H 63
ZPS H 63 Высокоточный обрабатывающий центр
Paletizovani obradni centar ZPS H 63
ZPS H 63 Palleterad bearbetningscentral
Paletli işleme merkezi ZPS H 63
EN
- Languages
English (GB)