21,500 €
Make an offerContact us to receive an offer.
| Working length | 4000 mm |
| Material thickness | 0.6 mm |
| Type | forming |
| ------------------- | |
| Length x width x height | 6100.0 × 1720.0 × 1600.0 |
| Weight | 5999 kg |
| worked hours | |
| hours under power | |
| state | malfunction |
| At local norms | --------- |
| status | dismantled |
| Last availability date | 19/12/2025 |
This is a Xiamen Zheng Liming roll forming machine, model 1304-15, manufactured in 2013. It is designed for forming sheet metal profiles with a working length of 4000 mm and overall dimensions of 6100 mm (length) x 1720 mm (width) x 1600 mm (height). The machine weighs approximately 5999 kg. It processes sheet metal with thicknesses ranging from 0.5 to 0.6 mm, suitable for galvanized sheets with zinc coating. The raw material strip widths are 120 mm for CD60 profiles and 73 mm for UD30 profiles, producing maximum profile lengths of up to 4 meters.
The machine features a hydraulic guillotine cutting system and a feed system consisting of chains and sprockets. The forming section includes multiple sets of rollers that shape the metal as it passes through. Safety features observed include safety guards with yellow-black hazard markings on roller covers and red safety lights mounted on the machine frame. The control panel is equipped with buttons and a touchscreen interface for operation.
The machine appears clean and well-maintained with no visible structural damage. Some wear and dirt are present on the rollers and forming dies, with minor paint chipping on the frame, but components appear intact. It is important to note that the electrical system, including full automation and motor, as well as the complete hydraulic group, are currently not available as they were removed for use in another project. Therefore, the machine requires extensive reconditioning to be brought back into working condition.
Overall, this roll forming machine is suitable for producing galvanized sheet metal profiles with precise dimensions, provided the necessary electrical and hydraulic components are restored.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Technical data of the machine:
- Manufacturer: Xiamen Zheng Liming
- Date of manufacture: 12.2013
- Series: 1304-15
- Overall dimensions L x w x h: 6.1m x 1.72m x 1.6m
- Weight: 6 000 kg
- Supply voltage: 400V
- Working speed: 12m/min
- Sheet cutting: hydraulically operated guillotines
Raw material / final product data:
- Sheet thickness: 0.5-0.6mm
- Raw material strip width CD60: 120mm
- Raw material strip width UD30: 73mm
- Maximum profile length: 4m
Machine condition: in order to be brought into working condition, the machine needs a more extensive reconditioning, since the electrical system (full automation/motor) and the hydraulic system (meaning the complete hydraulic group) are no longer available, they were used at another project.
The active parts of the machine that remained available were the profile forming parts (roller set), the feed system (chains and sprockets), the cutting system (guillotines + hydraulic pistons), and the machine frame.
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
| Client type | Factory – small or medium company |
| Active since | 2024 |
| Offers online | 3 |
| Last activity | May 26, 2026 |
Technical data of the machine:
- Manufacturer: Xiamen Zheng Liming
- Date of manufacture: 12.2013
- Series: 1304-15
- Overall dimensions L x w x h: 6.1m x 1.72m x 1.6m
- Weight: 6 000 kg
- Supply voltage: 400V
- Working speed: 12m/min
- Sheet cutting: hydraulically operated guillotines
Raw material / final product data:
- Sheet thickness: 0.5-0.6mm
- Raw material strip width CD60: 120mm
- Raw material strip width UD30: 73mm
- Maximum profile length: 4m
Machine condition: in order to be brought into working condition, the machine needs a more extensive reconditioning, since the electrical system (full automation/motor) and the hydraulic system (meaning the complete hydraulic group) are no longer available, they were used at another project.
The active parts of the machine that remained available were the profile forming parts (roller set), the feed system (chains and sprockets), the cutting system (guillotines + hydraulic pistons), and the machine frame.
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
| Working length | 4000 mm |
| Material thickness | 0.6 mm |
| Type | forming |
| ------------------- | |
| Length x width x height | 6100.0 × 1720.0 × 1600.0 |
| Weight | 5999 kg |
| worked hours | |
| hours under power | |
| state | malfunction |
| At local norms | --------- |
| status | dismantled |
| Last availability date | 19/12/2025 |
This is a Xiamen Zheng Liming roll forming machine, model 1304-15, manufactured in 2013. It is designed for forming sheet metal profiles with a working length of 4000 mm and overall dimensions of 6100 mm (length) x 1720 mm (width) x 1600 mm (height). The machine weighs approximately 5999 kg. It processes sheet metal with thicknesses ranging from 0.5 to 0.6 mm, suitable for galvanized sheets with zinc coating. The raw material strip widths are 120 mm for CD60 profiles and 73 mm for UD30 profiles, producing maximum profile lengths of up to 4 meters.
The machine features a hydraulic guillotine cutting system and a feed system consisting of chains and sprockets. The forming section includes multiple sets of rollers that shape the metal as it passes through. Safety features observed include safety guards with yellow-black hazard markings on roller covers and red safety lights mounted on the machine frame. The control panel is equipped with buttons and a touchscreen interface for operation.
The machine appears clean and well-maintained with no visible structural damage. Some wear and dirt are present on the rollers and forming dies, with minor paint chipping on the frame, but components appear intact. It is important to note that the electrical system, including full automation and motor, as well as the complete hydraulic group, are currently not available as they were removed for use in another project. Therefore, the machine requires extensive reconditioning to be brought back into working condition.
Overall, this roll forming machine is suitable for producing galvanized sheet metal profiles with precise dimensions, provided the necessary electrical and hydraulic components are restored.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Factory – small or medium company |
| Active since | 2024 |
| Offers online | 3 |
| Last activity | May 26, 2026 |
Looking for a used sheet metal machine?
Sheet metal machines cut, bend, form, and punch flat metal sheet and plate into finished components. The category covers the full sheet metal processing chain — from cutting equipment (guillotine shears, fiber laser cutters, plasma cutting tables, turret punch presses, waterjet systems) through forming equipment (press brakes, plate rolling machines, folding machines, panel benders) to finishing and combination machines (ironworkers, notchers, deburring systems). Equipment ranges from compact manual shears weighing a few hundred kilograms to high-tonnage CNC press brakes and fiber laser cutting systems weighing 8–25+ tonnes.
On Exapro, you can browse used sheet metal machines currently listed by sellers in Romania. Filter by machine type, cutting or bending capacity, CNC control, or working length to find equipment suited to your production needs. With machines physically located in Romania, buyers across Europe and beyond can arrange on-site inspections and benefit from competitive intra-EU transport routes.
Browse all used sheet metal machines in Romania available on Exapro today.
Машина за ламарина Xiamen Zheng Liming 1304-15
Tvářecí stroj Xiamen Zheng Liming 1304-15
Xiamen Zheng Liming 1304-15 Plademaskine
Xiamen Zheng Liming 1304-15 Blechbearbeitungsmaschine
Μηχάνημα λαμαρίνας Xiamen Zheng Liming 1304-15
Double rollforming machine for plasterboard profiles CD60 & UD30
Máquina para deformación de chapa Xiamen Zheng Liming 1304-15
Machine de tôlerie Xiamen Zheng Liming 1304-15
Stroj za lim Xiamen Zheng Liming 1304-15
Xiamen Zheng Liming 1304-15 Lemezgép
Macchina per lavorazione lamiera Xiamen Zheng Liming 1304-15
Lakštinio metalo mašina Xiamen Zheng Liming 1304-15
Xiamen Zheng Liming 1304-15 Plaatwerkmachine
Maszyna do obróbki blach Xiamen Zheng Liming 1304-15
Máquina de chapa metálica Xiamen Zheng Liming 1304-15
Mașină de tablă Xiamen Zheng Liming 1304-15
Xiamen Zheng Liming 1304-15 Листопрокатный станок
Mašina za lim Xiamen Zheng Liming 1304-15
Xiamen Zheng Liming 1304-15 Plåtmaskin
Sac işleme makinası Xiamen Zheng Liming 1304-15
EN
- Languages
English (GB)