| Manufacturer | WERA |
|---|---|
| Model | ZEM 300 |
| Year | 2000 |
| Location | Germany
|
| Category | Deburring machines |
| Weight | 3500 kg |
| worked hours | |
| hours under power | |
| state | as-is, where-is |
| At local norms | --------- |
| status | |
| Datasheet | Wera ZEM 300 |
| Last availability date | 09/10/2026 |
| Product id | P251119281 |
| Language |
Машина за отстраняване на ръбове WERA ZEM 300
Ostřihovací stroj WERA ZEM 300
WERA ZEM 300 Afgratningsmaskine
WERA ZEM 300 Entgratmaschine
Μηχανή αφαίρεσης γρεζιών WERA ZEM 300
WERA ZEM 300 Deburring machine
Desbarbadora WERA ZEM 300
Ébavureuse WERA ZEM 300
Stroj za skidanje ivica WERA ZEM 300
WERA ZEM 300 Sorjázó gép
Sbavatrice WERA ZEM 300
Šurmuliavimo mašina WERA ZEM 300
WERA ZEM 300 Ontbraammachine
Używana gratownica WERA ZEM 300
Máquina de rebarbação WERA ZEM 300
Mașină de debavurat WERA ZEM 300
WERA ZEM 300 Cтанок для снятия заусенцев
Mašina za skidanje ivica WERA ZEM 300
WERA ZEM 300 Gradningsmaskin
Çapak alma makinesi WERA ZEM 300
|
This is a WERA gear deburring machine, model ZEM 300, manufactured in 2000. It is designed for precise deburring of gears and features CNC control with a Sinumerik S7-300 system. The machine supports a maximum wheel diameter of 300 mm and a wheel width of 100 mm, suitable for various gear sizes. It can handle gear modules up to 5 and workpiece speeds ranging from 0 to 1000 revolutions per minute. The maximum shaft length accommodated is 1100 mm. The machine includes an automatic clamping system for workpiece securing, enhancing operational efficiency. The spindle operates at speeds up to 1000 revolutions per minute, with a spindle bearing diameter of 100 mm and a spindle flange diameter of 120 mm. The tailstock stroke measures 80 mm, allowing for additional support during processing. The machine weighs approximately 3500 kg and has dimensions of 1200 mm in length, 1450 mm in width, and 2250 mm in height. It requires a total power input of 10 kVA.
The machine housing is colored red and beige, with a transparent window on the door to allow viewing inside during operation. The control panel includes various buttons, switches, and an emergency stop button for safety and ease of use. Visible components include a mechanical arm equipped with pneumatic or hydraulic parts, multiple cables and tubes connected to the machine, and a base motor located at the bottom. The lower section contains a fluid or coolant tank with a pump system, which is protected by a transparent cover and connected via hoses. Voltage information displayed indicates operation at 380V AC and 220V AC.
The machine is offered as seen, with no explicit information provided regarding its working condition or testing status.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Machine type: Gear deburring machine
Make: WERA
Type: ZEM 300
Year of manufacture: 2000
Control type: CNC
Control name: Sinumerik S7-300
Wheel diameter - max.: 300 mm
Wheel width: 100 mm
Module - max.: 5
Workpiece speed: 0 - 1000 1/min
Shaft length - max.: 1100 mm
Workpiece clamping: automatic clamping system
Spindle speed: 1000 1/min
Spindle bearing diameter: 100 mm
Spindle flange diameter: 120 mm
Tailstock stroke: 80 mm
Machine weight: approx. 3500 KG
Dimensions (L x W x H): 1200 x 1450 x 2250 mm
Total power requirement: 10 kVA
Technical condition: as seen, where seen
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Machinery dealer |
| Active since | 2014 |
| Offers online | 119 |
| Last activity | Oct. 29, 2026 |
Machine type: Gear deburring machine
Make: WERA
Type: ZEM 300
Year of manufacture: 2000
Control type: CNC
Control name: Sinumerik S7-300
Wheel diameter - max.: 300 mm
Wheel width: 100 mm
Module - max.: 5
Workpiece speed: 0 - 1000 1/min
Shaft length - max.: 1100 mm
Workpiece clamping: automatic clamping system
Spindle speed: 1000 1/min
Spindle bearing diameter: 100 mm
Spindle flange diameter: 120 mm
Tailstock stroke: 80 mm
Machine weight: approx. 3500 KG
Dimensions (L x W x H): 1200 x 1450 x 2250 mm
Total power requirement: 10 kVA
Technical condition: as seen, where seen
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Category | Deburring machines |
| Weight | 3500 kg |
| worked hours | |
| hours under power | |
| state | as-is, where-is |
| At local norms | --------- |
| status | |
| Datasheet | Wera ZEM 300 |
| Last availability date | 09/10/2026 |
| Product id | P251119281 |
| Language |
Машина за отстраняване на ръбове WERA ZEM 300
Ostřihovací stroj WERA ZEM 300
WERA ZEM 300 Afgratningsmaskine
WERA ZEM 300 Entgratmaschine
Μηχανή αφαίρεσης γρεζιών WERA ZEM 300
WERA ZEM 300 Deburring machine
Desbarbadora WERA ZEM 300
Ébavureuse WERA ZEM 300
Stroj za skidanje ivica WERA ZEM 300
WERA ZEM 300 Sorjázó gép
Sbavatrice WERA ZEM 300
Šurmuliavimo mašina WERA ZEM 300
WERA ZEM 300 Ontbraammachine
Używana gratownica WERA ZEM 300
Máquina de rebarbação WERA ZEM 300
Mașină de debavurat WERA ZEM 300
WERA ZEM 300 Cтанок для снятия заусенцев
Mašina za skidanje ivica WERA ZEM 300
WERA ZEM 300 Gradningsmaskin
Çapak alma makinesi WERA ZEM 300
|
This is a WERA gear deburring machine, model ZEM 300, manufactured in 2000. It is designed for precise deburring of gears and features CNC control with a Sinumerik S7-300 system. The machine supports a maximum wheel diameter of 300 mm and a wheel width of 100 mm, suitable for various gear sizes. It can handle gear modules up to 5 and workpiece speeds ranging from 0 to 1000 revolutions per minute. The maximum shaft length accommodated is 1100 mm. The machine includes an automatic clamping system for workpiece securing, enhancing operational efficiency. The spindle operates at speeds up to 1000 revolutions per minute, with a spindle bearing diameter of 100 mm and a spindle flange diameter of 120 mm. The tailstock stroke measures 80 mm, allowing for additional support during processing. The machine weighs approximately 3500 kg and has dimensions of 1200 mm in length, 1450 mm in width, and 2250 mm in height. It requires a total power input of 10 kVA.
The machine housing is colored red and beige, with a transparent window on the door to allow viewing inside during operation. The control panel includes various buttons, switches, and an emergency stop button for safety and ease of use. Visible components include a mechanical arm equipped with pneumatic or hydraulic parts, multiple cables and tubes connected to the machine, and a base motor located at the bottom. The lower section contains a fluid or coolant tank with a pump system, which is protected by a transparent cover and connected via hoses. Voltage information displayed indicates operation at 380V AC and 220V AC.
The machine is offered as seen, with no explicit information provided regarding its working condition or testing status.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2014 |
| Offers online | 119 |
| Last activity | Oct. 29, 2026 |
EN
- Languages
English (GB)