| Manufacturer | WEMAS |
|---|---|
| Model | VZ 750 CENTURY |
| Year | 2001 |
| Location | Germany
|
This WEMAS VZ 750 CENTURY vertical machining center, manufactured in 2001, offers precise 3-axis machining capabilities with an X-axis travel of 750 mm, Y-axis travel of 500 mm, and Z-axis travel of 500 mm. It is equipped with a Heidenhain TNC 426 control unit, providing reliable and user-friendly operation. The machine features a maximum spindle speed of 10,000 rpm with an SK 40 taper spindle, suitable for various milling and drilling applications.
The machining center includes an electronic handwheel (Heidenhain HR 410) for manual positioning and fine adjustments. A tool changer is integrated into the machine to facilitate efficient tool management during production. The worktable is visible inside the enclosure and is equipped with a mounted 4th axis Walter CDS 22 motorized rotary table/indexing head, complete with a 3-jaw chuck, RS232 interface, and digital angle input. This addition enhances the machine's versatility for complex machining tasks.
Additional precision equipment includes an m&h Inprocess 3D tool sensor (Type m&h TS35.10) for tool measurement and an m&h infrared workpiece touch probe (Type 25.00 SK40-02) to ensure accurate workpiece setup.
The machine is accessed via side doors with windows on both left and right sides, allowing good visibility and ease of operation. The overall condition appears clean and well-maintained, with no visible damage observed. Electrical and pneumatic connections are properly installed at the rear and side of the machine, supporting reliable operation.
A handheld control pendant with emergency stop and axis control keys (X, Y, Z, IV, and V axes) is also included, offering additional operational flexibility. This WEMAS VZ 750 CENTURY vertical machining center is suitable for high-quality precision machining tasks, supported by its robust construction and comprehensive accessory package.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
This 3-axis WEMAS VZ 750 CENTURY was manufactured in 2001. It features an X-axis travel of 750 mm, Y-axis travel of 500 mm, and Z-axis travel of 500 mm. The machine includes a Heidenhain TNC 426 control unit, an electronic handwheel, and a tool changer. If you are looking to get high-quality machining capabilities, consider the WEMAS VZ 750 CENTURY vertical machining centre we have for sale. Contact us for further details.Machine ON time: 41,712 hours
Measuring system: Linear position measuring system in all three axes
Handwheel: Heidenhain HR 410 electronic handwheel
Tool changer: Included
Machine access: Side doors with windows (left and right)
Additional equipment
Tool probe: m&h Inprocess 3D tool sensor (Type m&h TS35.10)
Workpiece probe: m&h Infrared workpiece touch probe (Type 25.00 SK40-02)
4th axis: Walter CDS 22 motorized rotary table/indexing head with original control unit
Rotary table features: 3-jaw chuck, RS232 interface, digital angle input
Additional 4th axis: Walter CDS 22 rotary table/indexing unit
Control Brand: HEIDENHAIN
Control Model: TNC 426
Number of Axes: 3
Spindle Speed: 10000 RPM
Taper Size: SK 40
X-axis Travel: 750 mm
Y-axis Travel: 500 mm
Z-axis Travel: 500 mm
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Machinery dealer |
| Active since | 2019 |
| Offers online | 2051 |
| Last activity | Nov. 10, 2026 |
GINDUMAC GmbH is a dynamic German company specializing in the global trade of used industrial machinery. Our international team of more than 30 employees supports manufacturers worldwide in buying and selling high-quality used equipment across sectors such as metalworking, sheet metal, plastics, woodworking, and automation.
Through a data-driven, digital approach, the company delivers accurate machine valuations, professional inspections, and end-to-end transaction management — ensuring a transparent, secure, and efficient sales process for both buyers and sellers.
This 3-axis WEMAS VZ 750 CENTURY was manufactured in 2001. It features an X-axis travel of 750 mm, Y-axis travel of 500 mm, and Z-axis travel of 500 mm. The machine includes a Heidenhain TNC 426 control unit, an electronic handwheel, and a tool changer. If you are looking to get high-quality machining capabilities, consider the WEMAS VZ 750 CENTURY vertical machining centre we have for sale. Contact us for further details.Machine ON time: 41,712 hours
Measuring system: Linear position measuring system in all three axes
Handwheel: Heidenhain HR 410 electronic handwheel
Tool changer: Included
Machine access: Side doors with windows (left and right)
Additional equipment
Tool probe: m&h Inprocess 3D tool sensor (Type m&h TS35.10)
Workpiece probe: m&h Infrared workpiece touch probe (Type 25.00 SK40-02)
4th axis: Walter CDS 22 motorized rotary table/indexing head with original control unit
Rotary table features: 3-jaw chuck, RS232 interface, digital angle input
Additional 4th axis: Walter CDS 22 rotary table/indexing unit
Control Brand: HEIDENHAIN
Control Model: TNC 426
Number of Axes: 3
Spindle Speed: 10000 RPM
Taper Size: SK 40
X-axis Travel: 750 mm
Y-axis Travel: 500 mm
Z-axis Travel: 500 mm
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
This WEMAS VZ 750 CENTURY vertical machining center, manufactured in 2001, offers precise 3-axis machining capabilities with an X-axis travel of 750 mm, Y-axis travel of 500 mm, and Z-axis travel of 500 mm. It is equipped with a Heidenhain TNC 426 control unit, providing reliable and user-friendly operation. The machine features a maximum spindle speed of 10,000 rpm with an SK 40 taper spindle, suitable for various milling and drilling applications.
The machining center includes an electronic handwheel (Heidenhain HR 410) for manual positioning and fine adjustments. A tool changer is integrated into the machine to facilitate efficient tool management during production. The worktable is visible inside the enclosure and is equipped with a mounted 4th axis Walter CDS 22 motorized rotary table/indexing head, complete with a 3-jaw chuck, RS232 interface, and digital angle input. This addition enhances the machine's versatility for complex machining tasks.
Additional precision equipment includes an m&h Inprocess 3D tool sensor (Type m&h TS35.10) for tool measurement and an m&h infrared workpiece touch probe (Type 25.00 SK40-02) to ensure accurate workpiece setup.
The machine is accessed via side doors with windows on both left and right sides, allowing good visibility and ease of operation. The overall condition appears clean and well-maintained, with no visible damage observed. Electrical and pneumatic connections are properly installed at the rear and side of the machine, supporting reliable operation.
A handheld control pendant with emergency stop and axis control keys (X, Y, Z, IV, and V axes) is also included, offering additional operational flexibility. This WEMAS VZ 750 CENTURY vertical machining center is suitable for high-quality precision machining tasks, supported by its robust construction and comprehensive accessory package.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2019 |
| Offers online | 2051 |
| Last activity | Nov. 10, 2026 |
GINDUMAC GmbH is a dynamic German company specializing in the global trade of used industrial machinery. Our international team of more than 30 employees supports manufacturers worldwide in buying and selling high-quality used equipment across sectors such as metalworking, sheet metal, plastics, woodworking, and automation.
Through a data-driven, digital approach, the company delivers accurate machine valuations, professional inspections, and end-to-end transaction management — ensuring a transparent, secure, and efficient sales process for both buyers and sellers.
WEMAS VZ 750 CENTURY Вертикален машинен център
WEMAS VZ 750 CENTURY Vertikální obráběcí centrum
WEMAS VZ 750 CENTURY Vertikalt bearbejdningscenter
WEMAS VZ 750 CENTURY Vertikales Bearbeitungszentrum
WEMAS VZ 750 CENTURY Κατακόρυφο κέντρο μηχανουργικής επεξεργασίας
WEMAS VZ 750 CENTURY Vertical machining center
WEMAS VZ 750 CENTURY Centro de mecanizado vertical
WEMAS VZ 750 CENTURY Centre d'usinage vertical
WEMAS VZ 750 CENTURY Vertikalni obradni centar
WEMAS VZ 750 CENTURY Függőleges megmunkáló központ
WEMAS VZ 750 CENTURY Centro di lavoro verticale
WEMAS VZ 750 CENTURY Vertikalus apdirbimo centras
WEMAS VZ 750 CENTURY Verticaal bewerkingscentrum
WEMAS VZ 750 CENTURY Pionowe centrum obróbcze
WEMAS VZ 750 CENTURY Centro de usinagem vertical
WEMAS VZ 750 CENTURY Centru de prelucrare verticală
WEMAS VZ 750 CENTURY Вертикальный обрабатывающий центр
WEMAS VZ 750 CENTURY Вертикални машински центар
WEMAS VZ 750 CENTURY Vertikalt bearbetningscenter
WEMAS VZ 750 CENTURY Dikey işleme merkezi
EN
- Languages
English (GB)