Contact us to receive an offer.
| Manufacturer | Weiss |
|---|---|
| Model | SD 1400/+20 DU |
| Year | 2000 |
| Location | Germany
|
Manufacturer: Weiss
Model: SD 1400/+20 DU
Year of Manufacture: 2000
This industrial test chamber features a stainless steel test space with internal dimensions approximately 800 mm in height, 2000 mm in width, and 900 mm in depth, providing a capacity of 1440 liters. The outer casing is constructed from double-coated Zincor sheet metal, measuring about 2000 mm in height, 2200 mm in width, and 2000 mm in depth, finished in light gray (RAL 9002). The chamber is equipped with a double-leaf door hinged on the left and right sides, each door featuring windows with orange seals.
The chamber includes multiple feed-throughs: two in the floor and ceiling (NW 100 mm) for pulsating tables and one on each side wall (left and right, 100 mm). It is fitted with an air-cooled cooling unit and controlled by a DMR digital measuring and control system. The basic control panel is integrated into the main switch panel, and an RS 232 C interface allows for PC connectivity. The operating software is compatible with MS-Windows.
Performance specifications include a temperature range from +20 to +100 °C without air conditioning and 20 to +95 °C with climate control. Temperature stability ranges between +0.2 and +0.5 K in steady state, depending on conditions. Humidity control spans from 10 to 98% RH with a stability of +3 to +5% RH. Temperature change rates average 0.5 K/min for both heating and cooling within specified temperature ranges.
Additional features include protection class IP 32 for the control cabinet, a sound pressure level of 60 dB(A) at 1 meter distance, and requirements for fully demineralized humidification water. The condensate drain is a back pressure-free 3/4" hose connection. Electrical connection is 400 V, 3 PH+N PE, 50 Hz with a maximum connected load of 10 KVA. The chamber weighs approximately 1160 kg.
Visible components include two large ventilation fans mounted on the back interior wall behind protective grilles, two perforated metal platforms inside the chamber, and two cylindrical connectors hanging from the ceiling. The exterior shows a clean condition with minor wear on the base, and the interior surfaces appear well-maintained. The electrical control panel houses a Siemens SIMATIC S5-100U CPU with multiple digital input/output modules, relays, circuit breakers, and neatly organized wiring. Green anti-slip mats are positioned at the base of the chamber and inside, along with a labeled binder. White padded or soundproofing panels line the interior walls. Some mechanical components such as rotating discs, belts, and pulleys are present with minor visible wear.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Manufacturer: Weiss
Type: SD 1400/+20 DU
Test chamber:
Material: Stainless steel
dimensions
Height approx. 800 mm
Width approx. 2000 mm
Depth approx. 900 mm
Capacity: 1440 liters
Outer casing
Material: double-coated Zincor sheet metal
dimensions
Height approx. 2000 mm
Width approx. 2200 mm
Depth approx. 2000 mm
HxWxD 2000 x 2200 x 2000 mm
Paint finish: light gray (RAL 9002)
Door, double-leaf: hinged left and right
Equipment:
Feed-through in floor and ceiling: 2 each, NW 100 mm, for inserting the pulsating tables
Feed-through in the side walls: 1 each, left, right, 100 mm
Cooling unit: air-cooled
Control: DMR digital measuring and control system
Basic control panel: integrated in the main switch panel
Interface: RS 232 C, for connection to a PC
Software: Operating software for MS-Windows
Performance data:
Temperature range without air conditioning: +20...+100 °C
Temperature stability without climate control: +0.2 ... t0.5 K (in time) depending on range, in steady state
Temperature range with climate control: 20...+95 °C
Temperature stability with climate control: +0.2 ... +0.5 K (in time) depending on range, in steady state
Dew point range: 20...+94 °C
Humidity range: 10...98 % RH
Humidity stability: +3 ... +5 % r.h. depending on range, in steady state
Temperature change rate measured in blow-out without test specimen and without load
- Cooling: 0.5 K/min. on average, between +100 and +20 °C
⁃ Heating: 0.5 K/min. on average, between +20 and +100 °C
The performance specifications refer to an ambient temperature of max. +25 °C and the specified nominal voltage
For proper operation of the system, the ambient temperature must be between +10 and +35 °C
Connections / Other
Protection class: IP 32 for the control cabinet
Sound pressure level with free-field measurement at a distance of 1 m in front of the device: 60 dB (A)
Humidification water: fully demineralized, conductivity max. 20 pS/cm, pH value 6 - 7, automatic replenishment
Condensate drain: back pressure-free, 3/4" hose connection
Mains connection: 400 V; 3 PH+N PE; 50 Hz
Connected load: max. 10 KVA
Weight: approx. 1160 kg
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Machinery dealer |
| Active since | 2009 |
| Offers online | 24 |
| Last activity | Sept. 29, 2026 |
Manufacturer: Weiss
Type: SD 1400/+20 DU
Test chamber:
Material: Stainless steel
dimensions
Height approx. 800 mm
Width approx. 2000 mm
Depth approx. 900 mm
Capacity: 1440 liters
Outer casing
Material: double-coated Zincor sheet metal
dimensions
Height approx. 2000 mm
Width approx. 2200 mm
Depth approx. 2000 mm
HxWxD 2000 x 2200 x 2000 mm
Paint finish: light gray (RAL 9002)
Door, double-leaf: hinged left and right
Equipment:
Feed-through in floor and ceiling: 2 each, NW 100 mm, for inserting the pulsating tables
Feed-through in the side walls: 1 each, left, right, 100 mm
Cooling unit: air-cooled
Control: DMR digital measuring and control system
Basic control panel: integrated in the main switch panel
Interface: RS 232 C, for connection to a PC
Software: Operating software for MS-Windows
Performance data:
Temperature range without air conditioning: +20...+100 °C
Temperature stability without climate control: +0.2 ... t0.5 K (in time) depending on range, in steady state
Temperature range with climate control: 20...+95 °C
Temperature stability with climate control: +0.2 ... +0.5 K (in time) depending on range, in steady state
Dew point range: 20...+94 °C
Humidity range: 10...98 % RH
Humidity stability: +3 ... +5 % r.h. depending on range, in steady state
Temperature change rate measured in blow-out without test specimen and without load
- Cooling: 0.5 K/min. on average, between +100 and +20 °C
⁃ Heating: 0.5 K/min. on average, between +20 and +100 °C
The performance specifications refer to an ambient temperature of max. +25 °C and the specified nominal voltage
For proper operation of the system, the ambient temperature must be between +10 and +35 °C
Connections / Other
Protection class: IP 32 for the control cabinet
Sound pressure level with free-field measurement at a distance of 1 m in front of the device: 60 dB (A)
Humidification water: fully demineralized, conductivity max. 20 pS/cm, pH value 6 - 7, automatic replenishment
Condensate drain: back pressure-free, 3/4" hose connection
Mains connection: 400 V; 3 PH+N PE; 50 Hz
Connected load: max. 10 KVA
Weight: approx. 1160 kg
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
Manufacturer: Weiss
Model: SD 1400/+20 DU
Year of Manufacture: 2000
This industrial test chamber features a stainless steel test space with internal dimensions approximately 800 mm in height, 2000 mm in width, and 900 mm in depth, providing a capacity of 1440 liters. The outer casing is constructed from double-coated Zincor sheet metal, measuring about 2000 mm in height, 2200 mm in width, and 2000 mm in depth, finished in light gray (RAL 9002). The chamber is equipped with a double-leaf door hinged on the left and right sides, each door featuring windows with orange seals.
The chamber includes multiple feed-throughs: two in the floor and ceiling (NW 100 mm) for pulsating tables and one on each side wall (left and right, 100 mm). It is fitted with an air-cooled cooling unit and controlled by a DMR digital measuring and control system. The basic control panel is integrated into the main switch panel, and an RS 232 C interface allows for PC connectivity. The operating software is compatible with MS-Windows.
Performance specifications include a temperature range from +20 to +100 °C without air conditioning and 20 to +95 °C with climate control. Temperature stability ranges between +0.2 and +0.5 K in steady state, depending on conditions. Humidity control spans from 10 to 98% RH with a stability of +3 to +5% RH. Temperature change rates average 0.5 K/min for both heating and cooling within specified temperature ranges.
Additional features include protection class IP 32 for the control cabinet, a sound pressure level of 60 dB(A) at 1 meter distance, and requirements for fully demineralized humidification water. The condensate drain is a back pressure-free 3/4" hose connection. Electrical connection is 400 V, 3 PH+N PE, 50 Hz with a maximum connected load of 10 KVA. The chamber weighs approximately 1160 kg.
Visible components include two large ventilation fans mounted on the back interior wall behind protective grilles, two perforated metal platforms inside the chamber, and two cylindrical connectors hanging from the ceiling. The exterior shows a clean condition with minor wear on the base, and the interior surfaces appear well-maintained. The electrical control panel houses a Siemens SIMATIC S5-100U CPU with multiple digital input/output modules, relays, circuit breakers, and neatly organized wiring. Green anti-slip mats are positioned at the base of the chamber and inside, along with a labeled binder. White padded or soundproofing panels line the interior walls. Some mechanical components such as rotating discs, belts, and pulleys are present with minor visible wear.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2009 |
| Offers online | 24 |
| Last activity | Sept. 29, 2026 |
Лабораторен инкубатор Weiss SD 1400/+20 DU
Laboratorní inkubátor Weiss SD 1400/+20 DU
Weiss SD 1400/+20 DU Laboratorieinkubator
Weiss SD 1400/+20 DU Laborinkubator
Εργαστηριακός επωαστήρας Weiss SD 1400/+20 DU
Weiss SD 1400/+20 DU Laboratory incubator
Incubadora de laboratorio Weiss SD 1400/+20 DU
Incubateur de laboratoire Weiss SD 1400/+20 DU
Laboratorijski inkubator Weiss SD 1400/+20 DU
Weiss SD 1400/+20 DU Laboratóriumi inkubátor
Incubatore da laboratorio Weiss SD 1400/+20 DU
Weiss SD 1400/+20 DU Laboratorinis inkubatorius
Weiss SD 1400/+20 DU Laboratoriumincubator
Inkubator laboratoryjny Weiss SD 1400/+20 DU
Incubadora de laboratório Weiss SD 1400/+20 DU
Incubator de laborator Weiss SD 1400/+20 DU
Weiss SD 1400/+20 DU Лабораторный инкубатор
Laboratorijski inkubator Weiss SD 1400/+20 DU
Weiss SD 1400/+20 DU Laboratorieinkubator
Laboratuvar inkübatörü Weiss SD 1400/+20 DU
EN
- Languages
English (GB)