Contact us to receive an offer.
| Manufacturer | Weiss |
|---|---|
| Model | SC 1000/+20IU |
| Year | |
| Location | Germany
|
The Weiss SC 1000/+20IU is a corrosion climate change test chamber designed for combined climatic and corrosion testing applications. It features a variable temperature and humidity climate chamber alongside a salt spray test chamber, allowing for comprehensive environmental testing.
The temperature working range extends from +20 °C to +60 °C with a temperature deviation over time of ±0.5 K. The climate operating range includes temperatures between +20 °C and +60 °C, relative humidity from 10% to 98% r.h., and a dew point range of +12 °C to +59 °C. Salt spray testing is conducted at ambient temperature plus 5 °C up to +50 °C, conforming to DIN 50 021 standards using a 2-substance nozzle.
Control is managed via a digital SIMCON/32*-Net measuring and control system equipped with a touch control panel. Interfaces include RS 232 C serial and parallel printer ports. The process controller supports multiple operating modes such as temperature mode, climatic operation, salt spray test, direct spraying with salt solution, condensation load, rinsing of test room walls, and test room drying/ventilation.
The test chamber's interior usable space measures approximately 1000 mm in height to the roof slope (plus an additional 350 mm roof), 1100 mm in width, and 1000 mm in depth. The test room door is made of glass, hinged on the left side, with dimensions around 1350 mm in height and 1000 mm in width. The external dimensions including unit parts and switch cabinet are approximately 2100 mm in height, 1450 mm in width, and 2600 mm in depth.
The chamber includes a brine storage tank of about 200 liters with level monitoring, positioned separately next to or behind the unit. Electrical connection is 400 V with a connected load of 13 kW. The total weight of the chamber is approximately 1300 kg.
Observations reveal a large laboratory chamber with a blue-framed glass door, which shows signs of fogging or dirt. Inside, a white slatted platform is present along with circular fittings on the back wall. Rust is visible on several areas including the lower right corner, hinge area, bottom left corner, and around circular ports on the front and side panels. Dents are also noted on the side panel. The control panel is located on the right side with switches and a display, and a handset is attached on the left side. The display shows German-language menus and control settings, including temperature and humidifier status.
Power and network connectors are labeled for Network RS485/RS422 and RS232, with a power socket rated at 220-240 V/AC max. 2 A. Some rust and wear are visible around connector screws. The floor load capacity is a maximum of 100 kg.
This Weiss SC 1000/+20IU test chamber is suitable for laboratory environments requiring controlled climatic and corrosion testing, with detailed control options and comprehensive environmental simulation capabilities. The visible rust and dents should be considered when evaluating the unit's condition.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Weiss SC 1000/+20 JU corrosion climate change test chamber
Test system:
- Combination of climatic test chamber with variable temperature and humidity
- Corrosion test chamber with salt spray test
Temperature working range:
- Temperature: +20 °C ... +60 °C
- Temperature deviation over time: +0.5 K
Climate operating range:
- Temperature: +20 °C ... +60 °C
- Temperature deviation over time: +0.5 K
- Relative humidity: 10...98 % r.h.
- Humidity deviation over time: 3...5 % RH
- Dew point: +12 °C ... +59 °C
Salt spray test:
- Temperature range: Ambient temperature +5 °C ... +50 °C
- according to DIN 50 021 (salt spray via 2-substance nozzle, 1.5 x 0.5 mV80 cm? h)
Control:
- Digital measuring and control system SIMCON/32*-Net with touch control panel
Interfaces:
- RS 232 C serial interface
- Parallel printer interface
Operating modes can be set via process controller:
- Temperature mode
- Climatic operation
- Salt spray test
- Direct spraying with salt solution
- Condensation load
- Rinsing test room walls
- Test room drying/ventilation
Temperature sensor:
- Pt 100 resistance thermometer
Humidity sensor:
- psychrome fresh measuring device tft' (with forced humidification)
Technical data SC 1000/+20 JU:
- Usable space dimensions:
- Height to roof slope: approx. 1000 mm + roof approx. 350 mm
- Width: approx. 1100 mm
- Width between the heaters: approx. 1000 mm
- Depth: approx. 1000 mm
- Test room door made of glass, hinged on the left:
- Height: approx. 1350 mm
- Width: approx. 1000 mm
- External dimensions incl. unit parts and switch cabinet:
- Height: approx. 2100 mm
- Width: approx. 1450 mm
- Width with touch control panel: approx. 1700 mm
- Depth: approx. 2600 mm
- Floor load: max. 100 kg
- Brine storage tank: approx. 200 l, with level monitoring separately next to/behind the appliance
- Height: approx. 1000 mm
- Width: approx. 600 mm
- Depth: approx. 900 mm
- Electrical connection: 400 V
- Connected load: 13 kW
- Weight: 1300 kg
Technical condition: as viewed, where viewed.
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Machinery dealer |
| Active since | 2009 |
| Offers online | 24 |
| Last activity | Sept. 29, 2026 |
Weiss SC 1000/+20 JU corrosion climate change test chamber
Test system:
- Combination of climatic test chamber with variable temperature and humidity
- Corrosion test chamber with salt spray test
Temperature working range:
- Temperature: +20 °C ... +60 °C
- Temperature deviation over time: +0.5 K
Climate operating range:
- Temperature: +20 °C ... +60 °C
- Temperature deviation over time: +0.5 K
- Relative humidity: 10...98 % r.h.
- Humidity deviation over time: 3...5 % RH
- Dew point: +12 °C ... +59 °C
Salt spray test:
- Temperature range: Ambient temperature +5 °C ... +50 °C
- according to DIN 50 021 (salt spray via 2-substance nozzle, 1.5 x 0.5 mV80 cm? h)
Control:
- Digital measuring and control system SIMCON/32*-Net with touch control panel
Interfaces:
- RS 232 C serial interface
- Parallel printer interface
Operating modes can be set via process controller:
- Temperature mode
- Climatic operation
- Salt spray test
- Direct spraying with salt solution
- Condensation load
- Rinsing test room walls
- Test room drying/ventilation
Temperature sensor:
- Pt 100 resistance thermometer
Humidity sensor:
- psychrome fresh measuring device tft' (with forced humidification)
Technical data SC 1000/+20 JU:
- Usable space dimensions:
- Height to roof slope: approx. 1000 mm + roof approx. 350 mm
- Width: approx. 1100 mm
- Width between the heaters: approx. 1000 mm
- Depth: approx. 1000 mm
- Test room door made of glass, hinged on the left:
- Height: approx. 1350 mm
- Width: approx. 1000 mm
- External dimensions incl. unit parts and switch cabinet:
- Height: approx. 2100 mm
- Width: approx. 1450 mm
- Width with touch control panel: approx. 1700 mm
- Depth: approx. 2600 mm
- Floor load: max. 100 kg
- Brine storage tank: approx. 200 l, with level monitoring separately next to/behind the appliance
- Height: approx. 1000 mm
- Width: approx. 600 mm
- Depth: approx. 900 mm
- Electrical connection: 400 V
- Connected load: 13 kW
- Weight: 1300 kg
Technical condition: as viewed, where viewed.
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
The Weiss SC 1000/+20IU is a corrosion climate change test chamber designed for combined climatic and corrosion testing applications. It features a variable temperature and humidity climate chamber alongside a salt spray test chamber, allowing for comprehensive environmental testing.
The temperature working range extends from +20 °C to +60 °C with a temperature deviation over time of ±0.5 K. The climate operating range includes temperatures between +20 °C and +60 °C, relative humidity from 10% to 98% r.h., and a dew point range of +12 °C to +59 °C. Salt spray testing is conducted at ambient temperature plus 5 °C up to +50 °C, conforming to DIN 50 021 standards using a 2-substance nozzle.
Control is managed via a digital SIMCON/32*-Net measuring and control system equipped with a touch control panel. Interfaces include RS 232 C serial and parallel printer ports. The process controller supports multiple operating modes such as temperature mode, climatic operation, salt spray test, direct spraying with salt solution, condensation load, rinsing of test room walls, and test room drying/ventilation.
The test chamber's interior usable space measures approximately 1000 mm in height to the roof slope (plus an additional 350 mm roof), 1100 mm in width, and 1000 mm in depth. The test room door is made of glass, hinged on the left side, with dimensions around 1350 mm in height and 1000 mm in width. The external dimensions including unit parts and switch cabinet are approximately 2100 mm in height, 1450 mm in width, and 2600 mm in depth.
The chamber includes a brine storage tank of about 200 liters with level monitoring, positioned separately next to or behind the unit. Electrical connection is 400 V with a connected load of 13 kW. The total weight of the chamber is approximately 1300 kg.
Observations reveal a large laboratory chamber with a blue-framed glass door, which shows signs of fogging or dirt. Inside, a white slatted platform is present along with circular fittings on the back wall. Rust is visible on several areas including the lower right corner, hinge area, bottom left corner, and around circular ports on the front and side panels. Dents are also noted on the side panel. The control panel is located on the right side with switches and a display, and a handset is attached on the left side. The display shows German-language menus and control settings, including temperature and humidifier status.
Power and network connectors are labeled for Network RS485/RS422 and RS232, with a power socket rated at 220-240 V/AC max. 2 A. Some rust and wear are visible around connector screws. The floor load capacity is a maximum of 100 kg.
This Weiss SC 1000/+20IU test chamber is suitable for laboratory environments requiring controlled climatic and corrosion testing, with detailed control options and comprehensive environmental simulation capabilities. The visible rust and dents should be considered when evaluating the unit's condition.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2009 |
| Offers online | 24 |
| Last activity | Sept. 29, 2026 |
Лабораторен инкубатор Weiss SC 1000/+20IU
Laboratorní inkubátor Weiss SC 1000/+20IU
Weiss SC 1000/+20IU Laboratorieinkubator
Weiss SC 1000/+20IU Laborinkubator
Εργαστηριακός επωαστήρας Weiss SC 1000/+20IU
Weiss SC 1000/+20IU Laboratory incubator
Incubadora de laboratorio Weiss SC 1000/+20IU
Incubateur de laboratoire Weiss SC 1000/+20IU
Laboratorijski inkubator Weiss SC 1000/+20IU
Weiss SC 1000/+20IU Laboratóriumi inkubátor
Incubatore da laboratorio Weiss SC 1000/+20IU
Weiss SC 1000/+20IU Laboratorinis inkubatorius
Weiss SC 1000/+20IU Laboratoriumincubator
Inkubator laboratoryjny Weiss SC 1000/+20IU
Incubadora de laboratório Weiss SC 1000/+20IU
Incubator de laborator Weiss SC 1000/+20IU
Weiss SC 1000/+20IU Лабораторный инкубатор
Laboratorijski inkubator Weiss SC 1000/+20IU
Weiss SC 1000/+20IU Laboratorieinkubator
Laboratuvar inkübatörü Weiss SC 1000/+20IU
EN
- Languages
English (GB)