Contact us to receive an offer.
| Manufacturer | WEINIG |
|---|---|
| Model | UNIMAT SUPER 4 |
| Year | |
| Location | Poland
|
The WEINIG UNIMAT SUPER 4 is a four-sided planer designed for processing lamellas, featuring three spindles for versatile woodworking operations. It accommodates workpieces with a minimum width of 45 mm and a maximum width of 150 mm, as well as a height range from 15 mm to 50 mm. The machine is equipped with three spindles: a horizontal bottom spindle rated at 11 kW, a horizontal top spindle with 22 kW power operating at 7000 rpm, and a horizontal lower spindle with 5.5 kW. The spindle diameter is 40 mm. Spindles 1 and 3 allow manual adjustment both vertically and horizontally, while spindle 2 offers manual horizontal and electrical vertical adjustment. Additionally, spindles 2 and 3 are fitted with brakes for enhanced control during operation.
The feeding system includes three metal toothed rollers for input and pulling, complemented by a double infeed rubber roller. From below, the machine applies pressure on the introduction point, featuring a corrugated top and a smooth metal pulling roller. The machine allows electric setting of planing thickness and smooth feed speed adjustment ranging from 6 to 24 meters per minute, powered by a 3 kW feed motor. The feeding mechanism operates on cardan rollers, with an input table length of 1970 mm. An automatic table top lubrication system is incorporated to maintain operational efficiency.
The exhaust system includes one 150 mm and two 140 mm diameter stubs. The overall dimensions are 3070 mm in length, 2000 mm in width, and 1800 mm in height, with a total weight of approximately 2000 kg. The machine is manufactured in Germany and is intended for three-head operation.
Visual inspection reveals the machine is clean and in good condition with minor wear. The feeding table has a metal surface with guide rails and two adjustment knobs. The front panel includes control buttons and an emergency stop, while the side features a control panel with multiple switches and a red tool holder equipped with various tools. The exterior paint shows minor scratches and signs of use consistent with a used industrial machine. Heads are included, and the machine remains unpainted in some areas. This WEINIG UNIMAT SUPER 4 is suitable for users looking for a reliable multihead moulding machine for lamella processing.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
WEINIG UNIMAT SUPER 4 four-sided planer
TECHNICAL DATA
- min / max workpiece width 45 / 150mm
- min / max height of workpiece 15 / 50mm
3 spindles:
1) horizontal bottom 11kW
2) horizontal top 22kW (7000rpm)
3) horizontal lower 5.5kW
diameter of spindles 40mm
- spindle 1 and 3 manually adjustable up/down, right/left
- spindle 2 manually adjustable right/left
- spindle 2 electrically adjustable up/down
- spindle 2 and 3 are equipped with brakes
top:
- 3 input, pulling, metal toothed rollers
- 1 double infeed, pulling, rubber roller
from below:
- pressure on the introduction
- corrugated top
- pulling roller, metal, smooth
- electric setting of planing thickness
- smooth adjustment of the feed speed 6-24m/min
- feed motor 3kW
- feed on cardan rollers
- length of the input table 1970mm
- automatic system of table top lubrication
- diameter of the exhaust stub 1x150mm, 2x140mm
- dimensions L/W/H 3070x2000x1800mm
- weight 2000kg
ATTRIBUTES
- made in Germany
- for 3 heads
- for processing lamellas
- grooved top
- heads included
- unpainted
- very good condition
- used planer
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Machinery dealer |
| Active since | 2011 |
| Offers online | 27 |
| Last activity | Nov. 6, 2026 |
WEINIG UNIMAT SUPER 4 four-sided planer
TECHNICAL DATA
- min / max workpiece width 45 / 150mm
- min / max height of workpiece 15 / 50mm
3 spindles:
1) horizontal bottom 11kW
2) horizontal top 22kW (7000rpm)
3) horizontal lower 5.5kW
diameter of spindles 40mm
- spindle 1 and 3 manually adjustable up/down, right/left
- spindle 2 manually adjustable right/left
- spindle 2 electrically adjustable up/down
- spindle 2 and 3 are equipped with brakes
top:
- 3 input, pulling, metal toothed rollers
- 1 double infeed, pulling, rubber roller
from below:
- pressure on the introduction
- corrugated top
- pulling roller, metal, smooth
- electric setting of planing thickness
- smooth adjustment of the feed speed 6-24m/min
- feed motor 3kW
- feed on cardan rollers
- length of the input table 1970mm
- automatic system of table top lubrication
- diameter of the exhaust stub 1x150mm, 2x140mm
- dimensions L/W/H 3070x2000x1800mm
- weight 2000kg
ATTRIBUTES
- made in Germany
- for 3 heads
- for processing lamellas
- grooved top
- heads included
- unpainted
- very good condition
- used planer
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
The WEINIG UNIMAT SUPER 4 is a four-sided planer designed for processing lamellas, featuring three spindles for versatile woodworking operations. It accommodates workpieces with a minimum width of 45 mm and a maximum width of 150 mm, as well as a height range from 15 mm to 50 mm. The machine is equipped with three spindles: a horizontal bottom spindle rated at 11 kW, a horizontal top spindle with 22 kW power operating at 7000 rpm, and a horizontal lower spindle with 5.5 kW. The spindle diameter is 40 mm. Spindles 1 and 3 allow manual adjustment both vertically and horizontally, while spindle 2 offers manual horizontal and electrical vertical adjustment. Additionally, spindles 2 and 3 are fitted with brakes for enhanced control during operation.
The feeding system includes three metal toothed rollers for input and pulling, complemented by a double infeed rubber roller. From below, the machine applies pressure on the introduction point, featuring a corrugated top and a smooth metal pulling roller. The machine allows electric setting of planing thickness and smooth feed speed adjustment ranging from 6 to 24 meters per minute, powered by a 3 kW feed motor. The feeding mechanism operates on cardan rollers, with an input table length of 1970 mm. An automatic table top lubrication system is incorporated to maintain operational efficiency.
The exhaust system includes one 150 mm and two 140 mm diameter stubs. The overall dimensions are 3070 mm in length, 2000 mm in width, and 1800 mm in height, with a total weight of approximately 2000 kg. The machine is manufactured in Germany and is intended for three-head operation.
Visual inspection reveals the machine is clean and in good condition with minor wear. The feeding table has a metal surface with guide rails and two adjustment knobs. The front panel includes control buttons and an emergency stop, while the side features a control panel with multiple switches and a red tool holder equipped with various tools. The exterior paint shows minor scratches and signs of use consistent with a used industrial machine. Heads are included, and the machine remains unpainted in some areas. This WEINIG UNIMAT SUPER 4 is suitable for users looking for a reliable multihead moulding machine for lamella processing.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2011 |
| Offers online | 27 |
| Last activity | Nov. 6, 2026 |
Използвана многоглава машина за фрезоване WEINIG UNIMAT SUPER 4
Tvarovací frézka - více hlav WEINIG UNIMAT SUPER 4
WEINIG UNIMAT SUPER 4 Brugt multihead støber
WEINIG UNIMAT SUPER 4 Gebrauchte Mehrkopf-Kehlmaschine
Μεταχειρισμένη πολυκεφαλή καλουπώματος WEINIG UNIMAT SUPER 4
WEINIG UNIMAT SUPER 4 Used multihead moulder
Moldurera multihusillos WEINIG UNIMAT SUPER 4
Moulurière multi-têtes WEINIG UNIMAT SUPER 4
Rabljena višeglava glodalica WEINIG UNIMAT SUPER 4
WEINIG UNIMAT SUPER 4 Használt többfejű fröccsöntő
Scorniciatrice WEINIG UNIMAT SUPER 4
Naudotas kelių galvučių formavimo aparatas WEINIG UNIMAT SUPER 4
WEINIG UNIMAT SUPER 4 Gebruikte multihead freesmachine
Strugarka czterostronna WEINIG UNIMAT SUPER 4
Moldadora multihead usada WEINIG UNIMAT SUPER 4
Mașină de turnat cu mai multe capete uzate WEINIG UNIMAT SUPER 4
WEINIG UNIMAT SUPER 4 Формовочный фрезерный станок - многоголовочный
Korišćena mašina za kalupljenje sa više glava WEINIG UNIMAT SUPER 4
WEINIG UNIMAT SUPER 4 Begagnad multiheadformare
Çok kafalı profil makinası WEINIG UNIMAT SUPER 4
EN
- Languages
English (GB)