Weinig Profimat 23 Used multihead moulder
Germany
1999
| Engine power | 126 kW |
|---|
Belgium
1995
| Working width | 730 mm |
|---|---|
| Nbr of shafts | 7 |
| Sound proof cabin | |
| Feed speed | 36 m/min |
| Working height | 130 mm |
|---|---|
| Shafts diameter | 50 mm |
| Feeding table length | 800 mm |
| Engine power | 7.5 kW |
Poland
2001
| Working width | 230 mm |
|---|---|
| Nbr of shafts | 5 |
| Sound proof cabin | Yes |
| Feed speed | 24 m/min |
| Working height | 120 mm |
|---|---|
| Shafts diameter | 40 mm |
| Feeding table length | 2000 mm |
| Engine power | 5.5 kW |
Italy
1985
| Working width | 170 mm |
|---|---|
| Nbr of shafts | 8 |
| Sound proof cabin | No |
| Feed speed | 36 m/min |
| Working height | 120 mm |
|---|---|
| Shafts diameter | 40 mm |
| Feeding table length | 2000 mm |
| Engine power | 41 kW |
| Working width | 230 mm |
|---|---|
| Nbr of shafts | 8 |
| Feeding table length | 2000 mm |
| Engine power | 150 kW |
| Working height | 120 mm |
|---|---|
| Sound proof cabin | Yes |
| Feed speed | 36 m/min |
Poland
2010
| Working width | 300 mm |
|---|---|
| Nbr of shafts | 6 |
| Working height | 200 mm |
|---|---|
| Engine power | 20 kW |
| Working width | 230 mm |
|---|---|
| Nbr of shafts | 6 |
| Sound proof cabin | Yes |
| Feed speed | 100 m/min |
| Working height | 160 mm |
|---|---|
| Shafts diameter | 50 mm |
| Feeding table length | 250 mm |
| Engine power | 22 kW |
Czech Republic
2004
| Working width | 230 mm |
|---|---|
| Nbr of shafts | 6 |
| Sound proof cabin | Yes |
| Feed speed | 36 m/min |
| Working height | 120 mm |
|---|---|
| Shafts diameter | 40 mm |
| Feeding table length | 3500 mm |
| Engine power | 5.5 kW |
Switzerland
2013
| Working width | 230 mm |
|---|---|
| Shafts diameter | 40 mm |
| Working height | 120 mm |
|---|
| Working width | 250 mm |
|---|---|
| Nbr of shafts | 8 |
| Feeding table length | 3000 mm |
| Working height | 190 mm |
|---|---|
| Shafts diameter | 50 mm |
| Feed speed | 100 m/min |
Italy
1981
| Working width | 170 mm |
|---|---|
| Nbr of shafts | 8 |
| Sound proof cabin | No |
| Working height | 120 mm |
|---|---|
| Shafts diameter | 40 mm |
| Feeding table length | 2000 mm |
Turkey
2023
| Working width | 220 mm |
|---|---|
| Nbr of shafts | 5 |
| Sound proof cabin | No |
| Feed speed | 60 m/min |
| Working height | 140 mm |
|---|---|
| Shafts diameter | 50 mm |
| Feeding table length | 3000 mm |
| Engine power | 15 kW |
Poland
2009
| Working width | 230 mm |
|---|---|
| Nbr of shafts | 5 |
| Feeding table length | 230 mm |
| Engine power | 32 kW |
| Working height | 120 mm |
|---|---|
| Shafts diameter | 40 mm |
| Feed speed | 12 m/min |
| Working width | 300 mm |
|---|---|
| Nbr of shafts | 5 |
| Feed speed | 34 m/min |
| Working height | 200 mm |
|---|---|
| Shafts diameter | 50 mm |
| Working width | 230 mm |
|---|---|
| Nbr of shafts | 6 |
| Feed speed | 30 m/min |
| Working height | 120 mm |
|---|---|
| Shafts diameter | 40 mm |
Germany
1995
| Working width | 230 mm |
|---|---|
| Nbr of shafts | 5 |
| Feeding table length | 1750 mm |
| Engine power | 2.2 kW |
| Working height | 130 mm |
|---|---|
| Shafts diameter | 40 mm |
| Feed speed | 25.1 m/min |
| Working width | 230 mm |
|---|---|
| Nbr of shafts | 4 |
| Working height | 180 mm |
|---|---|
| Shafts diameter | 40 mm |
Ukraine
2006
| Working width | 150 mm |
|---|---|
| Nbr of shafts | 3 |
| Sound proof cabin | Yes |
| Feed speed | 24 m/min |
| Working height | 50 mm |
|---|---|
| Shafts diameter | 40 mm |
| Feeding table length | 1000 mm |
| Engine power | 22 kW |
| Working width | 230 mm |
|---|
| Working height | 120 mm |
|---|
| Working width | 230 mm |
|---|---|
| Nbr of shafts | 6 |
| Sound proof cabin | |
| Feed speed | 36 m/min |
| Working height | 120 mm |
|---|---|
| Shafts diameter | 40 mm |
| Feeding table length | 2000 mm |
| Engine power | 5.5 kW |
Poland
1998
| Working width | 230 mm |
|---|---|
| Nbr of shafts | 6 |
| Feeding table length | 1980 mm |
| Engine power | 66 kW |
| Working height | 180 mm |
|---|---|
| Shafts diameter | 40 mm |
| Feed speed | 36 m/min |
| Nbr of shafts | 6 |
|---|
Germany
1979
| Working width | 170 mm |
|---|---|
| Nbr of shafts | |
| Sound proof cabin | |
| Feed speed | 18.5 m/min |
| Working height | 140 mm |
|---|---|
| Shafts diameter | mm |
| Feeding table length | 1960 mm |
| Engine power | 5.5 kW |
United Kingdom
| Working width | 230 mm |
|---|---|
| Nbr of shafts | 5 |
| Sound proof cabin | Yes |
| Feed speed | 24 m/min |
| Working height | 120 mm |
|---|---|
| Shafts diameter | 40 mm |
| Feeding table length | 2000 mm |
| Engine power | 5.5 kW |
| Manufacturer | Weinig |
|---|---|
| Model | Profimat 23 |
| Year | 1994 |
| Location | Belgium
|
| Category | Moulders - Multihead moulding machines |
| Working width | 260 mm |
| Working height | 130 mm |
| Nbr of shafts | 5 |
| Shafts diameter | 40 mm |
| Sound proof cabin | Yes |
| Feeding table length | 2200 mm |
| Feed speed | 24 m/min |
| Engine power | 4 kW |
| worked hours | |
| hours under power | |
| state | good |
| At local norms | --------- |
| status | visible |
| Datasheet | Weinig Profimat 23 |
| Product id | P220920056 |
| Language |
Weinig Profimat 23
Tvarovací frézka - více hlav Weinig Profimat 23
Weinig Profimat 23
Weinig Profimat 23 Gebrauchte Mehrkopf-Kehlmaschine
Weinig Profimat 23
Weinig Profimat 23 Used multihead moulder
Moldurera multihusillos Weinig Profimat 23
Moulurière multi-têtes Weinig Profimat 23
Weinig Profimat 23
Weinig Profimat 23
Scorniciatrice Weinig Profimat 23
Weinig Profimat 23
Weinig Profimat 23
Strugarka czterostronna Weinig Profimat 23
Weinig Profimat 23
Weinig Profimat 23
Weinig Profimat 23 Формовочный фрезерный станок - многоголовочный
Weinig Profimat 23
Weinig Profimat 23
Çok kafalı profil makinası Weinig Profimat 23
|
This Weinig Profimat 23 multihead moulding machine, manufactured in 1994, is designed for precise woodworking with a working width of 260 mm and a working height of 130 mm. It features five shafts, each with a diameter of 40 mm, enabling versatile and efficient moulding operations. The machine is equipped with a feeding table measuring 2200 mm in length, facilitating smooth material handling during processing.
Power is distributed among several motors: the bottom motor provides 4 kW, the right and left motors each deliver 7.5 kW, and the top motor supplies 5.5 kW. Additionally, the feed speed is variable, powered by a 3 kW motor, allowing operators to adjust the feed rate according to specific requirements. The machine includes a motorised height adjustment for the top pressure beam, enhancing precision and ease of use.
A sound-proof cabin is incorporated, contributing to a quieter working environment. Pneumatic pressure systems are part of the machine's operation, supporting consistent and reliable performance. The drive system uses a cardan shaft.
The machine's exterior shows some minor wear marks and paint chipping, typical for used equipment, but overall it remains in good condition. Protective transparent covers are installed on the front side, and multiple safety warning stickers are present near the control panel area. The control panel itself is green, featuring numerous buttons, switches, a key switch, an emergency stop button, and a digital display screen, all of which appear clean and intact.
Additional smaller control panels with pressure gauges and knobs are located adjacent to the main panel, providing further operational controls. Internally, the machine houses mechanical components such as clamps, adjustment knobs, white cylindrical parts, metal rods, and a protective metal mesh, all showing signs of use but remaining intact. An illumination light strip is mounted inside the top cover to aid visibility during operation.
Please note that tools are not included with this machine. Overall, the Weinig Profimat 23 offers robust construction and comprehensive features suitable for various moulding tasks in woodworking applications.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Capacity: 260 x 130 mm.
Spindles: 5
Shaft diameter 40 mm
Bottom 4 kW, right/left 7,5 kW, top 5,5 kW, bottom 4 kW
Random side head af the left
Cardan shaft drive
Pneumatic pressures
Feed speed variable, motor 3 kW
Motorised height adjustment of top presssure beam
Infeed table 2200 mm length
tools not included
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Machinery dealer |
| Active since | 2019 |
| Offers online | 72 |
| Last activity | Nov. 4, 2026 |
Capacity: 260 x 130 mm.
Spindles: 5
Shaft diameter 40 mm
Bottom 4 kW, right/left 7,5 kW, top 5,5 kW, bottom 4 kW
Random side head af the left
Cardan shaft drive
Pneumatic pressures
Feed speed variable, motor 3 kW
Motorised height adjustment of top presssure beam
Infeed table 2200 mm length
tools not included
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Category | Moulders - Multihead moulding machines |
| Working width | 260 mm |
| Working height | 130 mm |
| Nbr of shafts | 5 |
| Shafts diameter | 40 mm |
| Sound proof cabin | Yes |
| Feeding table length | 2200 mm |
| Feed speed | 24 m/min |
| Engine power | 4 kW |
| worked hours | |
| hours under power | |
| state | good |
| At local norms | --------- |
| status | visible |
| Datasheet | Weinig Profimat 23 |
| Product id | P220920056 |
| Language |
Weinig Profimat 23
Tvarovací frézka - více hlav Weinig Profimat 23
Weinig Profimat 23
Weinig Profimat 23 Gebrauchte Mehrkopf-Kehlmaschine
Weinig Profimat 23
Weinig Profimat 23 Used multihead moulder
Moldurera multihusillos Weinig Profimat 23
Moulurière multi-têtes Weinig Profimat 23
Weinig Profimat 23
Weinig Profimat 23
Scorniciatrice Weinig Profimat 23
Weinig Profimat 23
Weinig Profimat 23
Strugarka czterostronna Weinig Profimat 23
Weinig Profimat 23
Weinig Profimat 23
Weinig Profimat 23 Формовочный фрезерный станок - многоголовочный
Weinig Profimat 23
Weinig Profimat 23
Çok kafalı profil makinası Weinig Profimat 23
|
This Weinig Profimat 23 multihead moulding machine, manufactured in 1994, is designed for precise woodworking with a working width of 260 mm and a working height of 130 mm. It features five shafts, each with a diameter of 40 mm, enabling versatile and efficient moulding operations. The machine is equipped with a feeding table measuring 2200 mm in length, facilitating smooth material handling during processing.
Power is distributed among several motors: the bottom motor provides 4 kW, the right and left motors each deliver 7.5 kW, and the top motor supplies 5.5 kW. Additionally, the feed speed is variable, powered by a 3 kW motor, allowing operators to adjust the feed rate according to specific requirements. The machine includes a motorised height adjustment for the top pressure beam, enhancing precision and ease of use.
A sound-proof cabin is incorporated, contributing to a quieter working environment. Pneumatic pressure systems are part of the machine's operation, supporting consistent and reliable performance. The drive system uses a cardan shaft.
The machine's exterior shows some minor wear marks and paint chipping, typical for used equipment, but overall it remains in good condition. Protective transparent covers are installed on the front side, and multiple safety warning stickers are present near the control panel area. The control panel itself is green, featuring numerous buttons, switches, a key switch, an emergency stop button, and a digital display screen, all of which appear clean and intact.
Additional smaller control panels with pressure gauges and knobs are located adjacent to the main panel, providing further operational controls. Internally, the machine houses mechanical components such as clamps, adjustment knobs, white cylindrical parts, metal rods, and a protective metal mesh, all showing signs of use but remaining intact. An illumination light strip is mounted inside the top cover to aid visibility during operation.
Please note that tools are not included with this machine. Overall, the Weinig Profimat 23 offers robust construction and comprehensive features suitable for various moulding tasks in woodworking applications.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2019 |
| Offers online | 72 |
| Last activity | Nov. 4, 2026 |
Romania
France
Sweden
Spain
Ireland
EN
- Languages
English (GB)