Contact us to receive an offer.
| Manufacturer | Weiler |
|---|---|
| Model | Praktikant |
| Year | 1984 |
| Location | Germany
|
This Weiler Praktikant 800R lathe, manufactured in 1984, is a versatile manual lathe designed for precision turning tasks. It features a center-to-center distance of 800 mm and a maximum turning diameter of 280 mm over the bed, with a reduced turning diameter of 160 mm over the transversing slide. The spindle bore measures 36 mm, allowing for the accommodation of various workpieces. The lathe's spindle speed ranges from 42 to 2000 rpm, adjustable via two motor speeds and eight gear stages, providing flexibility for different machining operations.
The machine is equipped with a 3-jaw parallel-spiral chuck (RÖHM ZS model, 160 mm diameter) that includes a set of stepped jaws, suitable for securely holding workpieces. A MULTIFIX quick-change tool holder, size A, is fitted with three interchangeable cassettes, enabling efficient tool changes and versatility in tooling.
The lathe includes a tailstock with a Morse taper 3 (MK 3) and a quill travel of 90 mm, supporting a range of drilling and support operations. Feed controls allow for both longitudinal and cross feeds, with visible levers and knobs for precise adjustments. The carriage and cross-slide handwheels feature graduated dials to facilitate accurate manual positioning.
Safety and operational convenience are addressed with a foldable chuck guard and an emergency stop button prominently located on the front panel. The lathe's control panel includes switches and clearly marked controls for ease of use. The machine measures 1900 mm in length, 700 mm in width, and 1300 mm in height, with a total weight of approximately 560 kg.
Visual inspection shows the lathe is painted green and appears clean and well-maintained, exhibiting only minor surface wear and some paint chipping around the tool post area. The chuck jaws are clean and in good condition, with minor surface scratches but no major damage. The bed ways show some wear marks typical of use, but no rust is evident. Included with the lathe are operating instructions with wiring diagrams.
This Weiler Praktikant lathe is suitable for users seeking a reliable manual lathe with comprehensive features for various turning applications.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
L + Z WEILER "Praktikant 800R" Lathe
Year of Manufacture: 1984
Center-to-center distance: 800 mm
Turning diameter over bed: 280 mm
Turning diameter over support: 160 mm
Center height over bed: 140 mm
Center height over support 80 mm
Spindle bore 36 mm
Feed longitudinal and cross
Chuck short taper DIN 55027 Size 5 4x M10
Tailstock taper MK 3
Quill travel 90 mm
Spindle speed 42 - 2000 rpm
Drive power 1 / 1.6 kW
Power supply 380 V, 50 Hz
- Spindle speed via 2 motor speeds and 8 gear stages
- 3-jaw parallel-spiral chuck RÖHM ZS Ø 160 mm with 1 set of stepped jaws
- MULTIFIX quick-change tool holder, size A, with 3 interchangeable cassettes
- Emergency stop
- Foldable chuck guard
- Operating instructions with wiring diagram
Footprint L x W x H 1900 x 700 x 1300 mm
Weight 560 kg
Good condition
Description provided by the seller (translated automatically). We recommend organizing a visit or a video call to confirm the details before you buy.
| Client type | Machinery dealer |
| Active since | 2011 |
| Offers online | 87 |
| Last activity | Nov. 19, 2026 |
L + Z WEILER "Praktikant 800R" Lathe
Year of Manufacture: 1984
Center-to-center distance: 800 mm
Turning diameter over bed: 280 mm
Turning diameter over support: 160 mm
Center height over bed: 140 mm
Center height over support 80 mm
Spindle bore 36 mm
Feed longitudinal and cross
Chuck short taper DIN 55027 Size 5 4x M10
Tailstock taper MK 3
Quill travel 90 mm
Spindle speed 42 - 2000 rpm
Drive power 1 / 1.6 kW
Power supply 380 V, 50 Hz
- Spindle speed via 2 motor speeds and 8 gear stages
- 3-jaw parallel-spiral chuck RÖHM ZS Ø 160 mm with 1 set of stepped jaws
- MULTIFIX quick-change tool holder, size A, with 3 interchangeable cassettes
- Emergency stop
- Foldable chuck guard
- Operating instructions with wiring diagram
Footprint L x W x H 1900 x 700 x 1300 mm
Weight 560 kg
Good condition
Description provided by the seller (translated automatically). We recommend organizing a visit or a video call to confirm the details before you buy.
This Weiler Praktikant 800R lathe, manufactured in 1984, is a versatile manual lathe designed for precision turning tasks. It features a center-to-center distance of 800 mm and a maximum turning diameter of 280 mm over the bed, with a reduced turning diameter of 160 mm over the transversing slide. The spindle bore measures 36 mm, allowing for the accommodation of various workpieces. The lathe's spindle speed ranges from 42 to 2000 rpm, adjustable via two motor speeds and eight gear stages, providing flexibility for different machining operations.
The machine is equipped with a 3-jaw parallel-spiral chuck (RÖHM ZS model, 160 mm diameter) that includes a set of stepped jaws, suitable for securely holding workpieces. A MULTIFIX quick-change tool holder, size A, is fitted with three interchangeable cassettes, enabling efficient tool changes and versatility in tooling.
The lathe includes a tailstock with a Morse taper 3 (MK 3) and a quill travel of 90 mm, supporting a range of drilling and support operations. Feed controls allow for both longitudinal and cross feeds, with visible levers and knobs for precise adjustments. The carriage and cross-slide handwheels feature graduated dials to facilitate accurate manual positioning.
Safety and operational convenience are addressed with a foldable chuck guard and an emergency stop button prominently located on the front panel. The lathe's control panel includes switches and clearly marked controls for ease of use. The machine measures 1900 mm in length, 700 mm in width, and 1300 mm in height, with a total weight of approximately 560 kg.
Visual inspection shows the lathe is painted green and appears clean and well-maintained, exhibiting only minor surface wear and some paint chipping around the tool post area. The chuck jaws are clean and in good condition, with minor surface scratches but no major damage. The bed ways show some wear marks typical of use, but no rust is evident. Included with the lathe are operating instructions with wiring diagrams.
This Weiler Praktikant lathe is suitable for users seeking a reliable manual lathe with comprehensive features for various turning applications.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2011 |
| Offers online | 87 |
| Last activity | Nov. 19, 2026 |
| Turning length | 1524 mm |
|---|---|
| Ø above the bed | 760 mm |
| Length between centers | 1519 mm |
| X-axis | 615 mm |
| Max workpiece weight | 150 kg |
| Spindle bore | 112 mm |
| Number of rotating tools | 40 |
| Spindle motor power | 30 kW |
| Turning Ø | 420 mm |
|---|---|
| Ø above transversing slide | 350 mm |
| Type of CNC | |
| Z-axis | 1585 mm |
| Spindle taper | |
| Number of tools on turret | 40 |
| Turning speed | 3300 rpm |
| Tailstock | no |
France
2017
| Turning Ø | 150 mm |
|---|---|
| X-axis | 100 mm |
| Spindle taper | JIS A2-5 |
| Number of tools on turret | 10 |
| Turning speed | 10000 rpm |
| Bar feeder | no |
| Type of CNC | MITSUBISHI M730UM |
|---|---|
| Z-axis | 220 mm |
| Number of turrets | 2 |
| Number of rotating tools | 20 |
| Tailstock | no |
France
2014
| Turning length | 564 mm |
|---|---|
| Ø above the bed | 923.8 mm |
| Length between centers | 512 mm |
| X-axis | 260 mm |
| Max workpiece weight | 80 kg |
| Spindle bore | 51 mm |
| Number of tools on turret | 12 |
| Turning speed | 6000 rpm |
| Turning Ø | 386 mm |
|---|---|
| Ø above transversing slide | 755 mm |
| Type of CNC | MAPPS M730BL |
| Z-axis | 590 mm |
| Spindle taper | A2-5" |
| Number of turrets | 1 |
| Number of rotating tools | 12 |
| Spindle motor power | 11 kW |
Belgium
| Ø above the bed | 720 mm |
|---|---|
| Type of CNC | Siemens Sinumerik 840C |
| Z-axis | 1500 mm |
| Spindle bore | 110 mm |
| Turning speed | 4000 rpm |
| Tailstock | no |
| Length between centers | 1500 mm |
|---|---|
| X-axis | 320 mm |
| Spindle taper | A2-11 |
| Number of tools on turret | 12 |
| Spindle motor power | 62 kW |
| Bar feeder | no |
Germany
2005
| Turning length | 400 mm |
|---|---|
| Ø above the bed | 300 mm |
| Length between centers | mm |
| X-axis | 280 mm |
| Max workpiece weight | kg |
| Spindle bore | 90 mm |
| Number of tools on turret | 12 |
| Turning speed | 5000 rpm |
| Turning Ø | 250 mm |
|---|---|
| Ø above transversing slide | mm |
| Type of CNC | Siemens 840 D |
| Z-axis | 1150 mm |
| Spindle taper | |
| Number of turrets | |
| Number of rotating tools | |
| Spindle motor power | 45 kW |
Germany
1990
| Ø above the bed | 330 mm |
|---|---|
| Type of CNC | |
| Spindle bore | 42 mm |
| Spindle motor power | 11 kW |
| Bar feeder | no |
| Ø above transversing slide | 160 mm |
|---|---|
| Spindle taper | DIN 55027 Gr. 5 |
| Turning speed | 4500 rpm |
| Tailstock | yes |
| Ø above the bed | 540 mm |
|---|---|
| Length between centers | 1000 mm |
| Spindle taper | |
| Number of tools on turret | 12 |
| Spindle motor power | 35 kW |
| Bar feeder | no |
| Ø above transversing slide | 450 mm |
|---|---|
| Type of CNC | Heidenhain Manual Plus |
| Spindle bore | 77 mm |
| Turning speed | 4000 rpm |
| Tailstock | no |
Czech Republic
2022
| Turning length | 600 mm |
|---|---|
| Ø above the bed | 210 mm |
| Length between centers | mm |
| X-axis | 190 mm |
| Max workpiece weight | kg |
| Spindle bore | 52 mm |
| Number of tools on turret | |
| Turning speed | 4500 rpm |
| Turning Ø | 235 mm |
|---|---|
| Ø above transversing slide | 235 mm |
| Type of CNC | |
| Z-axis | 640 mm |
| Spindle taper | |
| Number of turrets | |
| Number of rotating tools | |
| Spindle motor power | kW |
Austria
2006
| Turning length | mm |
|---|---|
| Ø above the bed | mm |
| Length between centers | 1500 mm |
| X-axis | 260 mm |
| Max workpiece weight | kg |
| Spindle bore | mm |
| Number of tools on turret | |
| Turning speed | rpm |
| Turning Ø | mm |
|---|---|
| Ø above transversing slide | mm |
| Type of CNC | |
| Z-axis | 1500 mm |
| Spindle taper | |
| Number of turrets | |
| Number of rotating tools | |
| Spindle motor power | kW |
Germany
1999
| Type of CNC | |
|---|---|
| Tailstock | no |
| Spindle taper | |
|---|---|
| Bar feeder | no |
Germany
2008
| Turning length | 400 mm |
|---|---|
| Ø above the bed | 300 mm |
| Length between centers | mm |
| X-axis | 280 mm |
| Max workpiece weight | kg |
| Spindle bore | 90 mm |
| Number of tools on turret | 12 |
| Turning speed | 5000 rpm |
| Turning Ø | 250 mm |
|---|---|
| Ø above transversing slide | mm |
| Type of CNC | Siemens 840 D |
| Z-axis | 1150 mm |
| Spindle taper | DIN 55026 |
| Number of turrets | |
| Number of rotating tools | |
| Spindle motor power | 45 kW |
Germany
2008
| Turning length | 400 mm |
|---|---|
| Ø above the bed | 300 mm |
| Length between centers | mm |
| X-axis | 280 mm |
| Max workpiece weight | kg |
| Spindle bore | 90 mm |
| Number of tools on turret | 12 |
| Turning speed | 5000 rpm |
| Turning Ø | 250 mm |
|---|---|
| Ø above transversing slide | mm |
| Type of CNC | SIEMENS SINUMERIK 840D |
| Z-axis | 1150 mm |
| Spindle taper | DIN 55026 |
| Number of turrets | |
| Number of rotating tools | |
| Spindle motor power | 45 kW |
Germany
2004
| Turning length | 4500 mm |
|---|---|
| Ø above transversing slide | 600 mm |
| Type of CNC | |
| Tailstock | no |
| Ø above the bed | 1000 mm |
|---|---|
| Length between centers | 4500 mm |
| Spindle taper | |
| Bar feeder | no |
Austria
2013
| Turning length | mm |
|---|---|
| Ø above the bed | mm |
| Length between centers | mm |
| X-axis | 180 mm |
| Max workpiece weight | kg |
| Spindle bore | mm |
| Number of tools on turret | |
| Turning speed | rpm |
| Turning Ø | mm |
|---|---|
| Ø above transversing slide | mm |
| Type of CNC | |
| Z-axis | 750 mm |
| Spindle taper | |
| Number of turrets | |
| Number of rotating tools | |
| Spindle motor power | kW |
Germany
1998
| Turning length | 950 mm |
|---|---|
| Ø above the bed | 440 mm |
| Type of CNC | Siemens Weiler D2 |
| Spindle bore | 54 mm |
| Tailstock | no |
| Turning Ø | 440 mm |
|---|---|
| Length between centers | 1000 mm |
| Spindle taper | |
| Spindle motor power | 3000 kW |
| Bar feeder | no |
Netherlands
| Turning length | 5500 mm |
|---|---|
| Ø above transversing slide | 960 mm |
| Spindle taper | |
| Bar feeder | no |
| Ø above the bed | 1400 mm |
|---|---|
| Type of CNC | R&D MTC3 |
| Tailstock | no |
Slovakia
2018
| Turning length | 750 mm |
|---|---|
| Type of CNC | |
| Turning speed | 4500 rpm |
| Tailstock | no |
| Ø above the bed | 330 mm |
|---|---|
| Spindle taper | |
| Spindle motor power | 15 kW |
| Bar feeder | no |
Germany
1998
| Turning length | 1000 mm |
|---|---|
| Type of CNC | Siemens Weiler D2 |
| Tailstock | no |
| Ø above the bed | 570 mm |
|---|---|
| Spindle taper | |
| Bar feeder | no |
Germany
1999
| Turning length | 1000 mm |
|---|---|
| Ø above the bed | 570 mm |
| Length between centers | 1000 mm |
| Max workpiece weight | 1600 kg |
| Spindle bore | 83 mm |
| Number of tools on turret | 4 |
| Spindle motor power | 20 kW |
| Bar feeder | no |
| Turning Ø | 570 mm |
|---|---|
| Ø above transversing slide | 340 mm |
| Type of CNC | Weiler D1 |
| Spindle taper | |
| Number of turrets | 1 |
| Turning speed | 2500 rpm |
| Tailstock | no |
Germany
2001
| Turning Ø | 720 mm |
|---|---|
| Ø above transversing slide | 430 mm |
| Type of CNC | Weiler D2 cycle control |
| Z-axis | 140 mm |
| Spindle taper | |
| Number of tools on turret | 4 |
| Spindle motor power | 27 kW |
| Bar feeder | no |
| Ø above the bed | 720 mm |
|---|---|
| Length between centers | 2000 mm |
| X-axis | 410 mm |
| Max workpiece weight | 3800 kg |
| Spindle bore | 106 mm |
| Turning speed | 1800 rpm |
| Tailstock | no |
Germany
2005
| Turning length | 2000 mm |
|---|---|
| Ø above transversing slide | 450 mm |
| Number of turrets | 1 |
| Bar feeder | no |
| Turning Ø | 730 mm |
|---|---|
| Type of CNC | Heidenhain |
| Tailstock | no |
Germany
1985
| Ø above the bed | 330 mm |
|---|---|
| Length between centers | 750 mm |
| Spindle taper | |
| Turning speed | 2800 rpm |
| Tailstock | yes |
| Ø above transversing slide | 180 mm |
|---|---|
| Type of CNC | |
| Spindle bore | 40 mm |
| Spindle motor power | 3 kW |
| Bar feeder | no |
Germany
2007
| Turning length | 3000 mm |
|---|---|
| Ø above the bed | 1200 mm |
| Spindle taper | |
| Tailstock | no |
| Turning Ø | 830 mm |
|---|---|
| Type of CNC | |
| Spindle bore | 165 mm |
| Bar feeder | no |
Germany
1998
| Length between centers | 2000 mm |
|---|---|
| Spindle taper | |
| Spindle motor power | 15 kW |
| Bar feeder | no |
| Type of CNC | |
|---|---|
| Spindle bore | 63 mm |
| Tailstock | no |
Germany
2009
| Turning length | 6000 mm |
|---|---|
| Ø above transversing slide | 850 mm |
| Spindle taper | |
| Turning speed | 710 rpm |
| Bar feeder | no |
| Turning Ø | 1250 mm |
|---|---|
| Type of CNC | |
| Spindle bore | 130 mm |
| Tailstock | no |
Netherlands
| Turning length | 500 mm |
|---|---|
| Ø above the bed | 245 mm |
| Length between centers | 450 mm |
| X-axis | 240 mm |
| Spindle taper | |
| Number of turrets | 1 |
| Number of rotating tools | 4 |
| Spindle motor power | 1.5 kW |
| Turning Ø | 245 mm |
|---|---|
| Ø above transversing slide | 250 mm |
| Type of CNC | WEILER CNC |
| Z-axis | 500 mm |
| Spindle bore | 23 mm |
| Number of tools on turret | 12 |
| Turning speed | 3000 rpm |
| Tailstock | yes |
United Kingdom
2007
| Turning length | 670 mm |
|---|---|
| Ø above the bed | 580 mm |
| Type of CNC | Fanuc 0ITC |
| Spindle bore | 86 mm |
| Spindle motor power | 18.5 kW |
| Bar feeder | no |
| Turning Ø | 450 mm |
|---|---|
| Ø above transversing slide | 450 mm |
| Spindle taper | A2-8" |
| Turning speed | 3500 rpm |
| Tailstock | no |