Contact us to receive an offer.
| Manufacturer | Waterjet |
|---|---|
| Model | NCT 30 |
| Year | 2017 |
| Location | Germany
|
Manufacturer: Waterjet
Model: NCT 30
Year of Manufacture: 2017
This used CNC waterjet cutting machine features a portal design suitable for precise and efficient cutting tasks. It is equipped with a high-pressure pump capable of operating at 4000 bar, enabling effective cutting performance. The machine includes a cutting tool identified as WJS Basis and a cutting head with an abrasive dosing unit model SM 3000.
The working area measures 3000 mm in length and 2000 mm in width, supported by a table load capacity of 1200 kg/m². The machine's travel ranges include an x-axis travel of 2010 mm, y-axis travel of 3010 mm, and a z-axis travel of 200 mm. The feed rate varies between 10 and 5 meters per minute, controlled via a FANUC system.
Additional features include CAD/CAM software Igems with 2D CAD, 2D CAM, and AWJ modules, enhancing programming and nesting capabilities (nesting levels 1 and 2). The abrasive system consists of a 200-liter abrasive pressure tank, a 1-ton abrasive tower, an abrasive monitoring package, and an abrasive disposal package. Remote control software and a collision protection package are also part of the equipment.
The machine's overall dimensions are approximately 10.3 meters in length, 4.2 meters in width, and 3.25 meters in height.
The control panel includes a screen and keypad labeled 'NCT 30' and is equipped with an emergency stop button for safety. The machine shows signs of use with some dirt and wear on the surface, consistent with normal operational conditions.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Manufacturer: Waterjet
Model: NCT 30
Year of construction: 2017
Technical condition: as inspected, where inspected
CNC: Yes
x-travel: 2010 mm
y-path: 3010 mm
z-path: 200 mm
Pump capacity: 4000 bar
Table load: 1200 kg/m²
Feed rate: 10/5 m/min
Table size: 3000 x 2000 mm
Control: FANUC
Machine weight: approx. t
Space requirement: approx. 10.3 x 4.2 x 3.25 m
Description:
Used CNC water cutting machine in portal design
- High pressure pump 4000 bar
- Cutting tool WJS Basis
- Cutting head, abrasive dosing unit SM 3000
- CAD/CAM software Igems 2D CAD, 2D CAM and AWJ module
- Abrasive pressure tank 200 liters
- Abrasive tower 1 ton
- Abrasive monitoring package
- Abrasive disposal package
- Software for remote control
- Collision protection package
- Nesting level 1 + 2
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Machinery dealer |
| Active since | 2011 |
| Offers online | 27 |
| Last activity | Nov. 4, 2026 |
Manufacturer: Waterjet
Model: NCT 30
Year of construction: 2017
Technical condition: as inspected, where inspected
CNC: Yes
x-travel: 2010 mm
y-path: 3010 mm
z-path: 200 mm
Pump capacity: 4000 bar
Table load: 1200 kg/m²
Feed rate: 10/5 m/min
Table size: 3000 x 2000 mm
Control: FANUC
Machine weight: approx. t
Space requirement: approx. 10.3 x 4.2 x 3.25 m
Description:
Used CNC water cutting machine in portal design
- High pressure pump 4000 bar
- Cutting tool WJS Basis
- Cutting head, abrasive dosing unit SM 3000
- CAD/CAM software Igems 2D CAD, 2D CAM and AWJ module
- Abrasive pressure tank 200 liters
- Abrasive tower 1 ton
- Abrasive monitoring package
- Abrasive disposal package
- Software for remote control
- Collision protection package
- Nesting level 1 + 2
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
Manufacturer: Waterjet
Model: NCT 30
Year of Manufacture: 2017
This used CNC waterjet cutting machine features a portal design suitable for precise and efficient cutting tasks. It is equipped with a high-pressure pump capable of operating at 4000 bar, enabling effective cutting performance. The machine includes a cutting tool identified as WJS Basis and a cutting head with an abrasive dosing unit model SM 3000.
The working area measures 3000 mm in length and 2000 mm in width, supported by a table load capacity of 1200 kg/m². The machine's travel ranges include an x-axis travel of 2010 mm, y-axis travel of 3010 mm, and a z-axis travel of 200 mm. The feed rate varies between 10 and 5 meters per minute, controlled via a FANUC system.
Additional features include CAD/CAM software Igems with 2D CAD, 2D CAM, and AWJ modules, enhancing programming and nesting capabilities (nesting levels 1 and 2). The abrasive system consists of a 200-liter abrasive pressure tank, a 1-ton abrasive tower, an abrasive monitoring package, and an abrasive disposal package. Remote control software and a collision protection package are also part of the equipment.
The machine's overall dimensions are approximately 10.3 meters in length, 4.2 meters in width, and 3.25 meters in height.
The control panel includes a screen and keypad labeled 'NCT 30' and is equipped with an emergency stop button for safety. The machine shows signs of use with some dirt and wear on the surface, consistent with normal operational conditions.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2011 |
| Offers online | 27 |
| Last activity | Nov. 4, 2026 |
машина за водно рязане Waterjet NCT 30
Vodní řezací stroj Waterjet NCT 30
Waterjet NCT 30 vandstråleskæremaskine
Waterjet NCT 30 Wasserstrahlschneidemaschine
μηχανή κοπής υδροβολής Waterjet NCT 30
Waterjet NCT 30 waterjet cutting machine
Maquina de corte con agua alta presion Waterjet NCT 30
Machine de découpe jet d'eau Waterjet NCT 30
stroj za rezanje vodenim mlazom Waterjet NCT 30
Waterjet NCT 30 vízsugaras vágógép
Impianto di taglio con getto ad acqua Waterjet NCT 30
pjovimo vandens srove mašina Waterjet NCT 30
Waterjet NCT 30 waterstraal snijmachine
Wycinarka waterjet Waterjet NCT 30
máquina de corte por jato de água Waterjet NCT 30
mașină de tăiat cu jet de apă Waterjet NCT 30
Waterjet NCT 30 Установка для гидроструйной резки
mašina za sečenje vodenim mlazom Waterjet NCT 30
Waterjet NCT 30 vattenskärmaskin
Su jeti kesim makinesi Waterjet NCT 30
EN
- Languages
English (GB)