Contact us to receive an offer.
| Manufacturer | Water purification system |
|---|---|
| Model | Autwomatic Plus 1+2 GRUF |
| Year | 2021 |
| Location | Greece
|
The Water Purification System Automatic Plus 1+2 GRUF, manufactured in 2021, is a laboratory-grade water purification unit designed to deliver high-quality purified water suitable for medical and laboratory applications. This system employs a multi-stage filtration process that typically includes pre-filtration, activated carbon, and resin treatment, ensuring effective removal of impurities, sediments, microorganisms, and organic contaminants. It features an automatic backwash and regeneration cycle to maintain continuous operation with minimal user intervention.
The unit includes a user-friendly touch screen interface for continuous monitoring of key parameters such as work time, water temperature, and conductivity. Audible and visual warnings alert the user to out-of-range parameters and necessary maintenance actions, including cartridge exchanges and feed water supply failures.
The system supports manual, volume-controlled, and time-controlled water dispensing, enhancing operational flexibility. It incorporates a photo-oxidation UV lamp, ultrafiltration cartridge, and a final 0.22 µm capsule filter to ensure ultrapure water output.
Physically, the unit measures 60 cm in height, 36 cm in width, and 49 cm in depth, weighing approximately 35 kg. It operates on a power supply of 110-220 VAC at 50-60 Hz.
Feed water requirements specify a minimum inlet pressure of 2 bar and a maximum of 6 bar, with a maximum water temperature of 30°C. The system is compatible with water hardness up to 300 ppm (CaCO3), a maximum feed water conductivity of 1500 µS/cm, free chlorine below 1 ppm, and turbidity under 1 NTU.
Visible components include two transparent water outlet nozzles with white caps labeled as Wasserlab Capsule Filters rated at 0.22 µm, a blue top panel featuring a small display screen, and a control panel equipped with pressure gauges and white cylindrical filters or cartridges mounted at the rear. The main body has a gray and white finish with a distinctive blue curved line design on the front panel.
This system is suitable for residential, commercial, or light industrial use, providing reliable, high-quality purified water with robust construction and advanced monitoring features.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
The Automatic Plus 1+2 GRUF is a high-performance water purification system designed for efficient removal of impurities, sediments, and microorganisms. Featuring an automatic backwash and regeneration process, it ensures continuous operation with minimal maintenance. The 1+2 GRUF configuration provides multi-stage filtration—typically including pre-filtration, activated carbon, and resin treatment—for superior water clarity, taste, and safety. Ideal for residential, commercial, or light industrial use, this system delivers reliable, high-quality purified water with user-friendly control and robust construction.
Technical specifications
Model: GRUF
Final Water Quality: Type II
Water Conductivity (μS/cm): <1
Water Resistivity (MΩ-cm) –
TOC (ppb): <50
Bacteria (cfu/ml): <1
Endotoxins (EU/ml) -
Rate and Storage
Flow Rate: 3/5/10l/h
Max. Flow rate Recommended LPD : 30-50-100
RO Pressurized Tank (L): 10/30/50
Dispensation
Manual Dispensing: ✓
Volume Controlled Dispensing: ✓
Time Controlled dispensing: ✓
Continuous Monitorization
Touch Screen/ Keyboard: Touch Screen
Visual and audible warning messages: ✓
Feed Water Conductivity (μS/cm): ✓
Osmotized water Conductivity (μS/cm): ✓
Ionic Rejection %: ✓
Final Water Conductivity (μS/cm): ✓
Final Water Resistivity (MΩ*cm): -
Work Time counter: ✓
Multiparameter Time counter: ✓
Water Temperature (°C): ✓
Temperature compensation: ✓
Waring to user messages
Out of range parameters: ✓
Pretreatment cartridge exchange: ✓
RO exchange: ✓
DI cartridge exchange: ✓
Ultrapure cartridge exchange: -
UV/Photo-oxidation Lamp exchange: ✓
Final Filter/UF exchange: ✓
Feed water supply failure: ✓
Automatisms
Automatic Strat/Stop: ✓
Automatic/Programmable recirculation: -
Automatic Stop/water supply failure: ✓
Automatic RO cleaning: ✓
Other components
Photo Oxidation lamp/UV: ✓
Final Filter 0.22μm: ✓
Ultrafiltration cartridge: ✓
Dimensions (Height/Width/Depth) [cm]: 60x36x49
Weight (kg):35
Power supply: 110-220VAC/50-60 Hz
Feed Water Requirements
Min. Inlet Pressure: 2bar
Max. Inlet Pressure: 6bar
Max. Water Temperature: 30°C
Max. Hardness: 300ppm (CaCO3)
SDI (Slit Density Index): <5
Max. Feed Water conductivity: 1500uS/cm
Free Chlorine: <1 ppm
Turbidity: <1NTU
Technical specifications
Model: GRUF
Final Water Quality: Type I
Water Conductivity (μS/cm): 0.056
Water Resistivity (MΩ-cm) 18.2
TOC (ppb): <3
Bacteria (cfu/ml): <1
Endotoxins (EU/ml): <0.03
Rate and Storage
Flow Rate: 1.1 l/min
Max. Flow rate Recommended LPD: -
RO Pressurized Tank (L): -
Dispensation
Manual Dispensing: ✓
Volume Controlled Dispensing: ✓
Time Controlled dispensing: ✓
Continuous Monitorization
Touch Screen/ Keyboard: Touch Screen
Visual and audible warning messages: ✓
Feed Water Conductivity (μS/cm): -
Osmotized water Conductivity (μS/cm): -
Ionic Rejection %: -
Final Water Conductivity (μS/cm): -
Final Water Resistivity (MΩ*cm): ✓
Work Time counter: ✓
Multiparameter Time counter: ✓
Water Temperature (°C): ✓
Temperature compensation: ✓
Waring to user messages
Out of range parameters: ✓
Pretreatment cartridge exchange: ✓
RO exchange: ✓
DI cartridge exchange: ✓
Ultrapure cartridge exchange: -
UV/Photo-oxidation Lamp exchange: ✓
Final Filter/UF exchange: ✓
Feed water supply failure: ✓
Automatisms
Automatic Strat/Stop: ✓
Automatic/Programmable recirculation: -
Automatic Stop/water supply failure: ✓
Automatic RO cleaning: ✓
Other components
Photo Oxidation lamp/UV: ✓
Final Filter 0.22μm: ✓
Ultrafiltration cartridge: ✓
Dimensions (Height/Width/Depth) [cm]: 60x36x49
Weight (kg):35
Power supply: 110-220VAC/50-60 Hz
Feed Water Requirements
Min. Inlet Pressure: 2bar
Max. Inlet Pressure: 6bar
Max. Water Temperature: 30°C
Max. Hardness: 300ppm (CaCO3)
SDI (Slit Density Index): <5
Max. Feed Water conductivity: 1500uS/cm
Free Chlorine: <1 ppm
Turbidity: <1NTU
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| water-purification-system-autwomatic-plus-12-gruf-p251111152_16.pdf | Download |
| Client type | Factory – small or medium company |
| Active since | 2025 |
| Offers online | 18 |
| Last activity | Nov. 5, 2026 |
The Automatic Plus 1+2 GRUF is a high-performance water purification system designed for efficient removal of impurities, sediments, and microorganisms. Featuring an automatic backwash and regeneration process, it ensures continuous operation with minimal maintenance. The 1+2 GRUF configuration provides multi-stage filtration—typically including pre-filtration, activated carbon, and resin treatment—for superior water clarity, taste, and safety. Ideal for residential, commercial, or light industrial use, this system delivers reliable, high-quality purified water with user-friendly control and robust construction.
Technical specifications
Model: GRUF
Final Water Quality: Type II
Water Conductivity (μS/cm): <1
Water Resistivity (MΩ-cm) –
TOC (ppb): <50
Bacteria (cfu/ml): <1
Endotoxins (EU/ml) -
Rate and Storage
Flow Rate: 3/5/10l/h
Max. Flow rate Recommended LPD : 30-50-100
RO Pressurized Tank (L): 10/30/50
Dispensation
Manual Dispensing: ✓
Volume Controlled Dispensing: ✓
Time Controlled dispensing: ✓
Continuous Monitorization
Touch Screen/ Keyboard: Touch Screen
Visual and audible warning messages: ✓
Feed Water Conductivity (μS/cm): ✓
Osmotized water Conductivity (μS/cm): ✓
Ionic Rejection %: ✓
Final Water Conductivity (μS/cm): ✓
Final Water Resistivity (MΩ*cm): -
Work Time counter: ✓
Multiparameter Time counter: ✓
Water Temperature (°C): ✓
Temperature compensation: ✓
Waring to user messages
Out of range parameters: ✓
Pretreatment cartridge exchange: ✓
RO exchange: ✓
DI cartridge exchange: ✓
Ultrapure cartridge exchange: -
UV/Photo-oxidation Lamp exchange: ✓
Final Filter/UF exchange: ✓
Feed water supply failure: ✓
Automatisms
Automatic Strat/Stop: ✓
Automatic/Programmable recirculation: -
Automatic Stop/water supply failure: ✓
Automatic RO cleaning: ✓
Other components
Photo Oxidation lamp/UV: ✓
Final Filter 0.22μm: ✓
Ultrafiltration cartridge: ✓
Dimensions (Height/Width/Depth) [cm]: 60x36x49
Weight (kg):35
Power supply: 110-220VAC/50-60 Hz
Feed Water Requirements
Min. Inlet Pressure: 2bar
Max. Inlet Pressure: 6bar
Max. Water Temperature: 30°C
Max. Hardness: 300ppm (CaCO3)
SDI (Slit Density Index): <5
Max. Feed Water conductivity: 1500uS/cm
Free Chlorine: <1 ppm
Turbidity: <1NTU
Technical specifications
Model: GRUF
Final Water Quality: Type I
Water Conductivity (μS/cm): 0.056
Water Resistivity (MΩ-cm) 18.2
TOC (ppb): <3
Bacteria (cfu/ml): <1
Endotoxins (EU/ml): <0.03
Rate and Storage
Flow Rate: 1.1 l/min
Max. Flow rate Recommended LPD: -
RO Pressurized Tank (L): -
Dispensation
Manual Dispensing: ✓
Volume Controlled Dispensing: ✓
Time Controlled dispensing: ✓
Continuous Monitorization
Touch Screen/ Keyboard: Touch Screen
Visual and audible warning messages: ✓
Feed Water Conductivity (μS/cm): -
Osmotized water Conductivity (μS/cm): -
Ionic Rejection %: -
Final Water Conductivity (μS/cm): -
Final Water Resistivity (MΩ*cm): ✓
Work Time counter: ✓
Multiparameter Time counter: ✓
Water Temperature (°C): ✓
Temperature compensation: ✓
Waring to user messages
Out of range parameters: ✓
Pretreatment cartridge exchange: ✓
RO exchange: ✓
DI cartridge exchange: ✓
Ultrapure cartridge exchange: -
UV/Photo-oxidation Lamp exchange: ✓
Final Filter/UF exchange: ✓
Feed water supply failure: ✓
Automatisms
Automatic Strat/Stop: ✓
Automatic/Programmable recirculation: -
Automatic Stop/water supply failure: ✓
Automatic RO cleaning: ✓
Other components
Photo Oxidation lamp/UV: ✓
Final Filter 0.22μm: ✓
Ultrafiltration cartridge: ✓
Dimensions (Height/Width/Depth) [cm]: 60x36x49
Weight (kg):35
Power supply: 110-220VAC/50-60 Hz
Feed Water Requirements
Min. Inlet Pressure: 2bar
Max. Inlet Pressure: 6bar
Max. Water Temperature: 30°C
Max. Hardness: 300ppm (CaCO3)
SDI (Slit Density Index): <5
Max. Feed Water conductivity: 1500uS/cm
Free Chlorine: <1 ppm
Turbidity: <1NTU
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
The Water Purification System Automatic Plus 1+2 GRUF, manufactured in 2021, is a laboratory-grade water purification unit designed to deliver high-quality purified water suitable for medical and laboratory applications. This system employs a multi-stage filtration process that typically includes pre-filtration, activated carbon, and resin treatment, ensuring effective removal of impurities, sediments, microorganisms, and organic contaminants. It features an automatic backwash and regeneration cycle to maintain continuous operation with minimal user intervention.
The unit includes a user-friendly touch screen interface for continuous monitoring of key parameters such as work time, water temperature, and conductivity. Audible and visual warnings alert the user to out-of-range parameters and necessary maintenance actions, including cartridge exchanges and feed water supply failures.
The system supports manual, volume-controlled, and time-controlled water dispensing, enhancing operational flexibility. It incorporates a photo-oxidation UV lamp, ultrafiltration cartridge, and a final 0.22 µm capsule filter to ensure ultrapure water output.
Physically, the unit measures 60 cm in height, 36 cm in width, and 49 cm in depth, weighing approximately 35 kg. It operates on a power supply of 110-220 VAC at 50-60 Hz.
Feed water requirements specify a minimum inlet pressure of 2 bar and a maximum of 6 bar, with a maximum water temperature of 30°C. The system is compatible with water hardness up to 300 ppm (CaCO3), a maximum feed water conductivity of 1500 µS/cm, free chlorine below 1 ppm, and turbidity under 1 NTU.
Visible components include two transparent water outlet nozzles with white caps labeled as Wasserlab Capsule Filters rated at 0.22 µm, a blue top panel featuring a small display screen, and a control panel equipped with pressure gauges and white cylindrical filters or cartridges mounted at the rear. The main body has a gray and white finish with a distinctive blue curved line design on the front panel.
This system is suitable for residential, commercial, or light industrial use, providing reliable, high-quality purified water with robust construction and advanced monitoring features.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Factory – small or medium company |
| Active since | 2025 |
| Offers online | 18 |
| Last activity | Nov. 5, 2026 |
Лабораторно оборудване Water purification system Autwomatic Plus 1+2 GRUF
Laboratorní vybavení Water purification system Autwomatic Plus 1+2 GRUF
Water purification system Autwomatic Plus 1+2 GRUF Laboratorieudstyr
Water purification system Autwomatic Plus 1+2 GRUF Laborzubehör
Εξοπλισμός εργαστηρίου Water purification system Autwomatic Plus 1+2 GRUF
Water purification system - Autwomatic Plus 1+2 GRUF
Equipo de laboratorio Water purification system Autwomatic Plus 1+2 GRUF
Equipement de laboratoire Water purification system Autwomatic Plus 1+2 GRUF
Laboratorijska oprema Water purification system Autwomatic Plus 1+2 GRUF
Water purification system Autwomatic Plus 1+2 GRUF Laboratóriumi felszerelés
Apparecchiatura da laboratorio Water purification system Autwomatic Plus 1+2 GRUF
Laboratorinė įranga Water purification system Autwomatic Plus 1+2 GRUF
Water purification system Autwomatic Plus 1+2 GRUF Labuitrusting
Urządzenie laboratoryjne Water purification system Autwomatic Plus 1+2 GRUF
Equipamento de laboratório Water purification system Autwomatic Plus 1+2 GRUF
Echipament de laborator Water purification system Autwomatic Plus 1+2 GRUF
Water purification system Autwomatic Plus 1+2 GRUF Лабораторное оборудование
Laboratorijska oprema Water purification system Autwomatic Plus 1+2 GRUF
Water purification system Autwomatic Plus 1+2 GRUF Laboratorieutrustning
Laboratuvar ekipmanları Water purification system Autwomatic Plus 1+2 GRUF
EN
- Languages
English (GB)