| Manufacturer | Ward |
|---|---|
| Model | 7D |
| Year | |
| Location | United Kingdom
|
| Category | Lathes - Parallel lathes (0 - 3000 mm) |
| Turning length | 1092 mm |
| Ø above the bed | 406 mm |
| Ø above transversing slide | 368 mm |
| Overhauled | no |
| Tailstock | no |
| Steady | no |
| Type of chuck | 3 jaw |
| worked hours | |
| hours under power | |
| state | as-is, where-is |
| At local norms | --------- |
| status | |
| Last availability date | 09/11/2026 |
| Product id | P261109058 |
| Language |
Паралелен струг Ward 7D
Hrotový soustruh Ward 7D
Ward 7D Konventionel drejebænk
Ward 7D Spitzendrehmaschine
Παράλληλος τόρνος Ward 7D
Ward 7D Parallel lathe
Torno paralelo Ward 7D
Tour parallèle Ward 7D
Paralelni tokarski stroj Ward 7D
Ward 7D Csúcseszterga
Tornio parallelo Ward 7D
Ward 7D Lygiagrečios tekinimo staklės
Ward 7D Conventionele draaibank
Tokarka kłowa Ward 7D
Torno paralelo Ward 7D
Strung paralel Ward 7D
Ward 7D Токарно-винторезный станок
Paralelni strug Ward 7D
Ward 7D Konventionell svarv
Paralel torna Ward 7D
|
Ward 7D Pre-lector combination turret lathe. The machine has a 406 mm swing over the bed and a 368 mm swing over the cross slide. The stated turning length is 1,092 mm, also given as the distance between the spindle flange and the face of the turret. It is fitted with a three-jaw chuck.
The visible machine components include the headstock, bed, carriage, tool post and tailstock. Manual control dials, buttons and handwheels are located along the headstock and carriage. The headstock bears the Ward name. These details describe the visible controls and components; no operating condition or performance is specified.
The exterior shows extensive paint chipping, with visible rust, grime and general surface wear. Metal chips and debris are present around the bed and on the floor nearby. The machine is offered as a Ward 7D lathe, with the dimensions and chuck type stated above. No manufacturing year is provided, and no claim is made about testing, working order or refurbishment.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
lathes
turret lathe
Ward 7D Pre-lector Combination Turret Lathe
Swing Over Bed 406mm
Swing Over Cross Slide 368mm
Distance Between Spindle Flange & Face of Turret 1092mm
12” 3 jaw chuck
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Machinery dealer |
| Active since | 2017 |
| Offers online | 132 |
| Last activity | Nov. 9, 2026 |
lathes
turret lathe
Ward 7D Pre-lector Combination Turret Lathe
Swing Over Bed 406mm
Swing Over Cross Slide 368mm
Distance Between Spindle Flange & Face of Turret 1092mm
12” 3 jaw chuck
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Category | Lathes - Parallel lathes (0 - 3000 mm) |
| Turning length | 1092 mm |
| Ø above the bed | 406 mm |
| Ø above transversing slide | 368 mm |
| Overhauled | no |
| Tailstock | no |
| Steady | no |
| Type of chuck | 3 jaw |
| worked hours | |
| hours under power | |
| state | as-is, where-is |
| At local norms | --------- |
| status | |
| Last availability date | 09/11/2026 |
| Product id | P261109058 |
| Language |
Паралелен струг Ward 7D
Hrotový soustruh Ward 7D
Ward 7D Konventionel drejebænk
Ward 7D Spitzendrehmaschine
Παράλληλος τόρνος Ward 7D
Ward 7D Parallel lathe
Torno paralelo Ward 7D
Tour parallèle Ward 7D
Paralelni tokarski stroj Ward 7D
Ward 7D Csúcseszterga
Tornio parallelo Ward 7D
Ward 7D Lygiagrečios tekinimo staklės
Ward 7D Conventionele draaibank
Tokarka kłowa Ward 7D
Torno paralelo Ward 7D
Strung paralel Ward 7D
Ward 7D Токарно-винторезный станок
Paralelni strug Ward 7D
Ward 7D Konventionell svarv
Paralel torna Ward 7D
|
Ward 7D Pre-lector combination turret lathe. The machine has a 406 mm swing over the bed and a 368 mm swing over the cross slide. The stated turning length is 1,092 mm, also given as the distance between the spindle flange and the face of the turret. It is fitted with a three-jaw chuck.
The visible machine components include the headstock, bed, carriage, tool post and tailstock. Manual control dials, buttons and handwheels are located along the headstock and carriage. The headstock bears the Ward name. These details describe the visible controls and components; no operating condition or performance is specified.
The exterior shows extensive paint chipping, with visible rust, grime and general surface wear. Metal chips and debris are present around the bed and on the floor nearby. The machine is offered as a Ward 7D lathe, with the dimensions and chuck type stated above. No manufacturing year is provided, and no claim is made about testing, working order or refurbishment.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2017 |
| Offers online | 132 |
| Last activity | Nov. 9, 2026 |
EN
- Languages
English (GB)