| Manufacturer | WALTER |
|---|---|
| Model | Helitronic Power Diamond |
| Year | 2015 |
| Location | France
|
WALTER Helitronic Power Diamond CNC grinding machine, manufactured in 2015. This enclosed tool grinding machine has a silver and dark-gray housing, a curved transparent front work-area door, and a separate control console with display, keypad, buttons, and emergency-stop button. Grinding equipment and fixtures are visible inside the enclosure. The exterior appears clean and intact in the visible areas; this is not a statement about operational condition.
Specifications:
- CNC: Yes
- Table length: 460 mm
- Table width: 320 mm
- Grinding wheel diameter: 200 mm
- Maximum wheel speed: 10,500 rpm
- Spindle power: 14.5 kW
- Weight: 5,200 kg
The current description lists a FANUC CNC control, Tool Studio software, a touchscreen, and five axes. Listed equipment includes a RENISHAW LP2 workpiece probe, automatic axis calibration sphere, grinding wheel changer, workpiece clamping equipment, manual tailstock, and automatic center. It also includes an Eco Loader tool loader, tool clamping system and cassettes, grinding wheel holders, electrode holders, and a calibration bar and disc. The machine is listed with a combined filtration system and cutting-fluid cooling unit, electrostatic vapor separator, and CO₂ fire suppression system; the fire suppression system should be inspected by a qualified organization.
Software listed includes TOOLSTUDIO Standard & Advanced, Step Tools, and WALTER WINDOW MODE packages. Operator, programming, and electrical schematics manuals are also listed. Please refer to the listed configuration and accessories when assessing suitability for your application.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
WALTER Helitronic Power Diamond CNC Grinding Machine
TECHNICAL SPECIFICATIONS:
Year: 2015
CNC Type: FANUC Series 31i-B5
Installed Software Version: Tool Studio 2.1 R8
Color Touchscreen: 15 ["]
Number of Axes: 5
X-Axis Travel: 460 [mm]
X-axis resolution: 0.0001 [mm]
Y-axis travel: 320 [mm]
Y-axis resolution: 0.0001 [mm]
Z-axis travel: 660 [mm]
Z-axis resolution: 0.0001 [mm]
Rapid traverse speed (X, Y, and Z): 15,000 [mm/min]
A-axis travel: 360 [°]
C-axis travel: +/- 200 [°]
C-axis resolution: 0.0001 [°]
Max. workpiece length (face grinding): 280 [mm]
Max. grinding length: 350 [mm]
Max. grinding diameter: 320 [mm]
Grinding spindle attachment: HSK-50
Max. grinding spindle speed: 10,500 [rpm]
Grinding spindle power: 14.5 [kW]
Max. grinding wheel diameter: 200 [mm]
Workpiece spindle nose: ISO 50
Max. allowable workpiece spindle load: 20 [kg]
Operating hours: 12,068 [h]
Coolant pump pressure: 7 [bar]
Coolant pump flow rate: 80 [l/min]
Supply voltage: 400 [V]
Installed power: 20 [kVA]
Weight: 5200 [kg]
ADDITIONAL EQUIPMENT:
Calibration sphere: automatic calibration of the X, Y, and Z axes.
RENISHAW LP2 workpiece probe
CO₂ fire suppression system (to be inspected by the buyer through a qualified organization)
A-axis for cylindrical grinding (Hollowshaft option)
8-position grinding wheel changer
Electrostatic vapor separator with DSL-type AES-GAMMA 30 noise suppressor
Hydraulic and electrical connections for use with an automatic center
Automatic center
Manual tailstock
Combined filtration system with paper belt filter + cartridges, coupled with a cutting fluid cooling unit
3-color indicator light
“Eco Loader” tool loader with tool clamping system and 5 cassettes (Ø6, Ø8, Ø10, Ø12, and Ø16)
E386ES tool clamping chuck with 5 collets (Ø8, Ø10, Ø12, Ø16, Ø20)
Grinding wheel holders
x2 electrode holders L=25mm
x1 electrode holder L = 45mm
x5 grinding wheel holders, L = 45 mm
x1 WALTER calibration bar No. 92102345 in a wooden case
x1 WALTER calibration disc No. 92106746 in a wooden case
x1 machine parameter backup
x1 operator’s manual (in English)
x1 ToolStudio programming manual (in English)
x1 electrical schematics manual
SOFTWARE:
TOOLSTUDIO Standard & Advanced
TOOLSTUDIO Step Tools License
TOOLSTUDIO License for PC
WALTER WINDOW MODE (P1, P2 & P3) for grinding (P51 & 52 for EDM)
WALTER WINDOW MODE Package 63 for PCD Drills
More information available upon request.
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Machinery dealer |
| Active since | 2018 |
| Offers online | 19 |
| Last activity | Nov. 4, 2026 |
KRAFFTER Machine Tools is a trusted French company specializing in the purchase, refurbishment, and sale of high-precision used CNC machine tools. Located in the Auvergne-Rhône-Alpes region, KRAFFTER serves industrial clients across Europe with reliable, cost-effective solutions tailored to the needs of precision manufacturing.
Their wide inventory covers a full spectrum of machine tools including turning, milling, grinding, sharpening, drilling, gear cutting, sawing, and metrology equipment. What sets KRAFFTER apart is their commitment to quality: each machine undergoes expert inspection and refurbishment by in-house specialists, ensuring optimal performance and accuracy.
KRAFFTER also provides comprehensive support services, from mechanical and electrical diagnostics to full refurbishments and retrofitting. They handle transport logistics and export formalities, delivering turnkey machines that are ready for immediate integration into production lines.
With a strong reputation for responsiveness and technical excellence, KRAFFTER Machine Tools is the ideal partner for companies looking to invest in premium machine tools while keeping budgets under control. If you are looking for ready-to-run, high-performance machines backed by professional service, KRAFFTER delivers precision you can count on.
WALTER Helitronic Power Diamond CNC Grinding Machine
TECHNICAL SPECIFICATIONS:
Year: 2015
CNC Type: FANUC Series 31i-B5
Installed Software Version: Tool Studio 2.1 R8
Color Touchscreen: 15 ["]
Number of Axes: 5
X-Axis Travel: 460 [mm]
X-axis resolution: 0.0001 [mm]
Y-axis travel: 320 [mm]
Y-axis resolution: 0.0001 [mm]
Z-axis travel: 660 [mm]
Z-axis resolution: 0.0001 [mm]
Rapid traverse speed (X, Y, and Z): 15,000 [mm/min]
A-axis travel: 360 [°]
C-axis travel: +/- 200 [°]
C-axis resolution: 0.0001 [°]
Max. workpiece length (face grinding): 280 [mm]
Max. grinding length: 350 [mm]
Max. grinding diameter: 320 [mm]
Grinding spindle attachment: HSK-50
Max. grinding spindle speed: 10,500 [rpm]
Grinding spindle power: 14.5 [kW]
Max. grinding wheel diameter: 200 [mm]
Workpiece spindle nose: ISO 50
Max. allowable workpiece spindle load: 20 [kg]
Operating hours: 12,068 [h]
Coolant pump pressure: 7 [bar]
Coolant pump flow rate: 80 [l/min]
Supply voltage: 400 [V]
Installed power: 20 [kVA]
Weight: 5200 [kg]
ADDITIONAL EQUIPMENT:
Calibration sphere: automatic calibration of the X, Y, and Z axes.
RENISHAW LP2 workpiece probe
CO₂ fire suppression system (to be inspected by the buyer through a qualified organization)
A-axis for cylindrical grinding (Hollowshaft option)
8-position grinding wheel changer
Electrostatic vapor separator with DSL-type AES-GAMMA 30 noise suppressor
Hydraulic and electrical connections for use with an automatic center
Automatic center
Manual tailstock
Combined filtration system with paper belt filter + cartridges, coupled with a cutting fluid cooling unit
3-color indicator light
“Eco Loader” tool loader with tool clamping system and 5 cassettes (Ø6, Ø8, Ø10, Ø12, and Ø16)
E386ES tool clamping chuck with 5 collets (Ø8, Ø10, Ø12, Ø16, Ø20)
Grinding wheel holders
x2 electrode holders L=25mm
x1 electrode holder L = 45mm
x5 grinding wheel holders, L = 45 mm
x1 WALTER calibration bar No. 92102345 in a wooden case
x1 WALTER calibration disc No. 92106746 in a wooden case
x1 machine parameter backup
x1 operator’s manual (in English)
x1 ToolStudio programming manual (in English)
x1 electrical schematics manual
SOFTWARE:
TOOLSTUDIO Standard & Advanced
TOOLSTUDIO Step Tools License
TOOLSTUDIO License for PC
WALTER WINDOW MODE (P1, P2 & P3) for grinding (P51 & 52 for EDM)
WALTER WINDOW MODE Package 63 for PCD Drills
More information available upon request.
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
WALTER Helitronic Power Diamond CNC grinding machine, manufactured in 2015. This enclosed tool grinding machine has a silver and dark-gray housing, a curved transparent front work-area door, and a separate control console with display, keypad, buttons, and emergency-stop button. Grinding equipment and fixtures are visible inside the enclosure. The exterior appears clean and intact in the visible areas; this is not a statement about operational condition.
Specifications:
- CNC: Yes
- Table length: 460 mm
- Table width: 320 mm
- Grinding wheel diameter: 200 mm
- Maximum wheel speed: 10,500 rpm
- Spindle power: 14.5 kW
- Weight: 5,200 kg
The current description lists a FANUC CNC control, Tool Studio software, a touchscreen, and five axes. Listed equipment includes a RENISHAW LP2 workpiece probe, automatic axis calibration sphere, grinding wheel changer, workpiece clamping equipment, manual tailstock, and automatic center. It also includes an Eco Loader tool loader, tool clamping system and cassettes, grinding wheel holders, electrode holders, and a calibration bar and disc. The machine is listed with a combined filtration system and cutting-fluid cooling unit, electrostatic vapor separator, and CO₂ fire suppression system; the fire suppression system should be inspected by a qualified organization.
Software listed includes TOOLSTUDIO Standard & Advanced, Step Tools, and WALTER WINDOW MODE packages. Operator, programming, and electrical schematics manuals are also listed. Please refer to the listed configuration and accessories when assessing suitability for your application.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2018 |
| Offers online | 19 |
| Last activity | Nov. 4, 2026 |
KRAFFTER Machine Tools is a trusted French company specializing in the purchase, refurbishment, and sale of high-precision used CNC machine tools. Located in the Auvergne-Rhône-Alpes region, KRAFFTER serves industrial clients across Europe with reliable, cost-effective solutions tailored to the needs of precision manufacturing.
Their wide inventory covers a full spectrum of machine tools including turning, milling, grinding, sharpening, drilling, gear cutting, sawing, and metrology equipment. What sets KRAFFTER apart is their commitment to quality: each machine undergoes expert inspection and refurbishment by in-house specialists, ensuring optimal performance and accuracy.
KRAFFTER also provides comprehensive support services, from mechanical and electrical diagnostics to full refurbishments and retrofitting. They handle transport logistics and export formalities, delivering turnkey machines that are ready for immediate integration into production lines.
With a strong reputation for responsiveness and technical excellence, KRAFFTER Machine Tools is the ideal partner for companies looking to invest in premium machine tools while keeping budgets under control. If you are looking for ready-to-run, high-performance machines backed by professional service, KRAFFTER delivers precision you can count on.
Шлифовъчна машина WALTER Helitronic Power Diamond
Bruska WALTER Helitronic Power Diamond
WALTER Helitronic Power Diamond Slibemaskine
WALTER Helitronic Power Diamond Schleifmaschine
Μηχανή λείανσης WALTER Helitronic Power Diamond
WALTER Helitronic Power Diamond Grinding machine
Rectificadora WALTER Helitronic Power Diamond
Affûteuse CNC WALTER Helitronic Power Diamond
Brusilica WALTER Helitronic Power Diamond
WALTER Helitronic Power Diamond Köszörűgép
Rettificatrice WALTER Helitronic Power Diamond
WALTER Helitronic Power Diamond Šlifavimo staklės
WALTER Helitronic Power Diamond Slijpmachine
Szlifierka WALTER Helitronic Power Diamond
Retificadora WALTER Helitronic Power Diamond
Mașină de rectificat WALTER Helitronic Power Diamond
WALTER Helitronic Power Diamond Шлифовальный станок
Brusilica WALTER Helitronic Power Diamond
WALTER Helitronic Power Diamond Slipmaskin
Taşlama makinesi WALTER Helitronic Power Diamond
EN
- Languages
English (GB)