Contact us to receive an offer.
| Manufacturer | WAB |
|---|---|
| Model | Dyno-Mill KD 6 |
| Year | 2006 |
| Location | Czech Republic
|
| Category | Mills |
| Capacity | 6 L |
| Engine Power | 10 kW |
| worked hours | |
| hours under power | |
| state | good |
| At local norms | --------- |
| status | visible |
| Last availability date | 06/11/2026 |
| Product id | P240927147 |
| Language |
Мелница WAB Dyno-Mill KD 6
WAB Dyno-Mill model KD 6 (6) nerezový perlový mlýn
WAB Dyno-Mill KD 6 Mølle
WAB Dyno-Mill KD 6 Quetsche
Μύλος WAB Dyno-Mill KD 6
WAB Dyno-Mill Model KD 6 (6) Stainless Steel Bead Mill
Triturador WAB Dyno-Mill KD 6
Broyeur WAB Dyno-Mill KD 6
Mlin WAB Dyno-Mill KD 6
WAB Dyno-Mill KD 6 Malom
Mulino WAB Dyno-Mill KD 6
Malūnas WAB Dyno-Mill KD 6
WAB Dyno-Mill KD 6 Molen
Młynek WAB Dyno-Mill KD 6
Moinho WAB Dyno-Mill KD 6
moara WAB Dyno-Mill KD 6
WAB Dyno-Mill KD 6 Дробильное оборудование
Mill WAB Dyno-Mill KD 6
WAB Dyno-Mill KD 6 Kvarn
Mengene WAB Dyno-Mill KD 6
|
This listing is for a used WAB Dyno-Mill KD 6 stainless steel horizontal bead mill, manufactured in 2006. The mill features a stainless steel jacketed milling chamber with an approximate capacity of 6 liters. The chamber is designed to operate at a maximum product pressure of 2 bar and a maximum temperature of 80°C. The jacket surrounding the chamber is rated for a maximum pressure of 8 bar and can handle cooling water temperatures as low as -20°C.
The milling shaft is equipped with six polyurethane grinding discs and is belt-driven by a 10 kW electric motor running at 1465 rpm and 50 Hz frequency. The agitator disc achieves a circumferential speed of 10 m/s. The shaft is sealed with a double mechanical seal, and the mill uses a gap-type mechanism for milling bead separation.
The machine includes an integrated control panel and switchboard mounted on top of the main unit, featuring various buttons and an emergency stop for operational control. A pressure gauge is attached to the machine's piping system to monitor pressure during operation. The frame of the mill is constructed from carbon steel.
Visual inspection reveals the mill has a white and blue exterior with the 'DYNO-MILL KD 6' label. The yellow rotor with multiple blades is housed inside the blue cylindrical chamber. The rotor shaft and blades appear clean and in good condition, with minor surface wear but no evident damage. Some minor rust marks are present on metal flanges and edges, and the machine shows signs of use including some dirt and surface stains, particularly on the metal tank or reservoir inside the cabinet. The interior metal surfaces of the housing are generally clean with minor streak marks. The removable cover and seals on the cylindrical housing show minor wear but are intact.
Overall, this Dyno-Mill KD 6 is a robust bead mill suitable for various milling applications, with visible signs of normal industrial use.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Used WAB Dyno-Mill model KD 6 (6) stainless steel horizontal bead mill. Stainless steel jacketed milling chamer has capacity approx. 6 litre and it rated max product pressure 2 bar at max temperature 80°C. Jacket rated max pressure 8 bar, min cooling water temperature -20°C. Shaft is equipped with (6) polyurethane griding discs and belt driven by EExe eII T3 el. motor 10 kW, 1465 rpm, 50 Hz. Agitator disc circumferential speed 10 m/s. Shaft sealed with double mechanical seal. Gap type of milling beads separation mechanism. Includes integrated contol panel and switchboard, carbon steel frame.
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
What type of mill is this WAB Dyno-Mill Model KD 6?
This WAB Dyno-Mill Model KD 6 is a stainless steel bead mill.
When was this equipment manufactured?
This equipment was manufactured in the year 2006.
The following questions and answers are generated using artificial intelligence based on the product information available. They are provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2009 |
| Offers online | 27 |
| Last activity | Nov. 7, 2026 |
Used WAB Dyno-Mill model KD 6 (6) stainless steel horizontal bead mill. Stainless steel jacketed milling chamer has capacity approx. 6 litre and it rated max product pressure 2 bar at max temperature 80°C. Jacket rated max pressure 8 bar, min cooling water temperature -20°C. Shaft is equipped with (6) polyurethane griding discs and belt driven by EExe eII T3 el. motor 10 kW, 1465 rpm, 50 Hz. Agitator disc circumferential speed 10 m/s. Shaft sealed with double mechanical seal. Gap type of milling beads separation mechanism. Includes integrated contol panel and switchboard, carbon steel frame.
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
What type of mill is this WAB Dyno-Mill Model KD 6?
This WAB Dyno-Mill Model KD 6 is a stainless steel bead mill.
When was this equipment manufactured?
This equipment was manufactured in the year 2006.
The following questions and answers are generated using artificial intelligence based on the product information available. They are provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Category | Mills |
| Capacity | 6 L |
| Engine Power | 10 kW |
| worked hours | |
| hours under power | |
| state | good |
| At local norms | --------- |
| status | visible |
| Last availability date | 06/11/2026 |
| Product id | P240927147 |
| Language |
Мелница WAB Dyno-Mill KD 6
WAB Dyno-Mill model KD 6 (6) nerezový perlový mlýn
WAB Dyno-Mill KD 6 Mølle
WAB Dyno-Mill KD 6 Quetsche
Μύλος WAB Dyno-Mill KD 6
WAB Dyno-Mill Model KD 6 (6) Stainless Steel Bead Mill
Triturador WAB Dyno-Mill KD 6
Broyeur WAB Dyno-Mill KD 6
Mlin WAB Dyno-Mill KD 6
WAB Dyno-Mill KD 6 Malom
Mulino WAB Dyno-Mill KD 6
Malūnas WAB Dyno-Mill KD 6
WAB Dyno-Mill KD 6 Molen
Młynek WAB Dyno-Mill KD 6
Moinho WAB Dyno-Mill KD 6
moara WAB Dyno-Mill KD 6
WAB Dyno-Mill KD 6 Дробильное оборудование
Mill WAB Dyno-Mill KD 6
WAB Dyno-Mill KD 6 Kvarn
Mengene WAB Dyno-Mill KD 6
|
This listing is for a used WAB Dyno-Mill KD 6 stainless steel horizontal bead mill, manufactured in 2006. The mill features a stainless steel jacketed milling chamber with an approximate capacity of 6 liters. The chamber is designed to operate at a maximum product pressure of 2 bar and a maximum temperature of 80°C. The jacket surrounding the chamber is rated for a maximum pressure of 8 bar and can handle cooling water temperatures as low as -20°C.
The milling shaft is equipped with six polyurethane grinding discs and is belt-driven by a 10 kW electric motor running at 1465 rpm and 50 Hz frequency. The agitator disc achieves a circumferential speed of 10 m/s. The shaft is sealed with a double mechanical seal, and the mill uses a gap-type mechanism for milling bead separation.
The machine includes an integrated control panel and switchboard mounted on top of the main unit, featuring various buttons and an emergency stop for operational control. A pressure gauge is attached to the machine's piping system to monitor pressure during operation. The frame of the mill is constructed from carbon steel.
Visual inspection reveals the mill has a white and blue exterior with the 'DYNO-MILL KD 6' label. The yellow rotor with multiple blades is housed inside the blue cylindrical chamber. The rotor shaft and blades appear clean and in good condition, with minor surface wear but no evident damage. Some minor rust marks are present on metal flanges and edges, and the machine shows signs of use including some dirt and surface stains, particularly on the metal tank or reservoir inside the cabinet. The interior metal surfaces of the housing are generally clean with minor streak marks. The removable cover and seals on the cylindrical housing show minor wear but are intact.
Overall, this Dyno-Mill KD 6 is a robust bead mill suitable for various milling applications, with visible signs of normal industrial use.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2009 |
| Offers online | 27 |
| Last activity | Nov. 7, 2026 |
EN
- Languages
English (GB)