Contact us to receive an offer.
| Manufacturer | Vötsch |
|---|---|
| Model | VT 7030 S2 |
| Year | 1998 |
| Location | Germany
|
Manufacturer: Vötsch
Model: VT 7030 S2
Type: Environmental Test Chamber
Description:
The Vötsch VT 7030 S2 is a robust environmental test chamber designed primarily for laboratory use. It features a sizable test chamber with a volume of approximately 300 liters, divided into two compartments, each sealed with orange gaskets to ensure controlled environmental conditions. The upper compartment includes a metal mesh back panel and hanging wires, while the lower compartment has a metal base and visible wiring.
This chamber is suitable for scientific research, product testing, and process control, allowing programmable simulation of various environmental conditions. It operates within a temperature range of -80 °C to +220 °C, with separate hot and cold chamber specifications. The hot chamber ranges from +50 °C to +220 °C, with a temporal temperature deviation of ±1 K and spatial deviation of ±2 K. The cold chamber operates from -80 °C to +70 °C, maintaining similar temperature stability.
The unit complies with IEC 60068-3-5 standards for temperature gradient and change rates, offering a heating rate of up to 11 K/min and cooling rate of 4 K/min. It is powered by a 3/N/PE AC 400 V ± 10 %, 50 Hz supply, with a nominal output of 30 kW and nominal current of 50 A. The refrigeration system uses R-404a and R-23 refrigerants and is water-cooled.
The machine measures 1800 mm in length, 1200 mm in width, and 2050 mm in height, weighing approximately 940 kg. The test chamber itself measures 770 mm wide, 650 mm deep, and 610 mm high.
Additional features include a control panel with keypad and display mounted on the right side, facilitating easy operation. The exterior shows no visible signs of damage or rust, and the machine appears clean and intact. Electrical cables and hoses are connected at the back, leading to external equipment, with all panels and connections appearing intact.
Year of manufacture: 1998
Status: Sold as-is, where-is.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Manufacturer: Vötsch
Model: VT 7030 S2
Type: Environmental test chamber
Application area:
The Vötsch VT 7030 S2 environmental test chamber is designed for laboratory applications that require testing of materials and components in a controlled environment.
Functions:
- Programmable unit for simulating different environmental conditions
- Ideal for scientific studies, product testing and process control
Technical data:
- Test chamber volume: approx. 300 l
- Temperature range hot chamber: +50 °C to +220 °C
- Temporal temperature deviation in the center of the chamber: ± 1 K
- Spatial temperature deviation: ± 2 K
- Temperature gradient (according to IEC 60068-3-5): 4 K
- Temperature change rate heating (according to IEC 60068-3-5, measured in supply air): 11 K/min
- Temperature range cold chamber: -80 °C to +70 °C
- Temperature deviation over time in the center of the working chamber: ± 1 K
- Spatial temperature deviation: 2 K
- Temperature gradient (according to IEC 60068-3-5): 4 K
- Temperature change rate heating (according to IEC 60068-3-5, measured in supply air): 1.5 K/min
- Temperature change rate cooling: 4 K/min
Power supply:
- Voltage: 3/N/PE AC 400 V ± 10 %, 50 Hz
- Nominal output: 30 kW
- Nominal current: 50 A
Refrigeration system:
- Refrigerant: R-404a / R-23
- Chiller: Water-cooled
Weight:
- approx. 940 kg
Year of construction:
- 1998
Dimensions
- Test chamber: width 770 mm x depth 650 mm x height 610 mm
- Housing: Width 1200 mm x depth 1800 mm x height 2050 mm
Status:
- as-is, where-is
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Machinery dealer |
| Active since | 2009 |
| Offers online | 24 |
| Last activity | Sept. 29, 2026 |
Manufacturer: Vötsch
Model: VT 7030 S2
Type: Environmental test chamber
Application area:
The Vötsch VT 7030 S2 environmental test chamber is designed for laboratory applications that require testing of materials and components in a controlled environment.
Functions:
- Programmable unit for simulating different environmental conditions
- Ideal for scientific studies, product testing and process control
Technical data:
- Test chamber volume: approx. 300 l
- Temperature range hot chamber: +50 °C to +220 °C
- Temporal temperature deviation in the center of the chamber: ± 1 K
- Spatial temperature deviation: ± 2 K
- Temperature gradient (according to IEC 60068-3-5): 4 K
- Temperature change rate heating (according to IEC 60068-3-5, measured in supply air): 11 K/min
- Temperature range cold chamber: -80 °C to +70 °C
- Temperature deviation over time in the center of the working chamber: ± 1 K
- Spatial temperature deviation: 2 K
- Temperature gradient (according to IEC 60068-3-5): 4 K
- Temperature change rate heating (according to IEC 60068-3-5, measured in supply air): 1.5 K/min
- Temperature change rate cooling: 4 K/min
Power supply:
- Voltage: 3/N/PE AC 400 V ± 10 %, 50 Hz
- Nominal output: 30 kW
- Nominal current: 50 A
Refrigeration system:
- Refrigerant: R-404a / R-23
- Chiller: Water-cooled
Weight:
- approx. 940 kg
Year of construction:
- 1998
Dimensions
- Test chamber: width 770 mm x depth 650 mm x height 610 mm
- Housing: Width 1200 mm x depth 1800 mm x height 2050 mm
Status:
- as-is, where-is
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
Manufacturer: Vötsch
Model: VT 7030 S2
Type: Environmental Test Chamber
Description:
The Vötsch VT 7030 S2 is a robust environmental test chamber designed primarily for laboratory use. It features a sizable test chamber with a volume of approximately 300 liters, divided into two compartments, each sealed with orange gaskets to ensure controlled environmental conditions. The upper compartment includes a metal mesh back panel and hanging wires, while the lower compartment has a metal base and visible wiring.
This chamber is suitable for scientific research, product testing, and process control, allowing programmable simulation of various environmental conditions. It operates within a temperature range of -80 °C to +220 °C, with separate hot and cold chamber specifications. The hot chamber ranges from +50 °C to +220 °C, with a temporal temperature deviation of ±1 K and spatial deviation of ±2 K. The cold chamber operates from -80 °C to +70 °C, maintaining similar temperature stability.
The unit complies with IEC 60068-3-5 standards for temperature gradient and change rates, offering a heating rate of up to 11 K/min and cooling rate of 4 K/min. It is powered by a 3/N/PE AC 400 V ± 10 %, 50 Hz supply, with a nominal output of 30 kW and nominal current of 50 A. The refrigeration system uses R-404a and R-23 refrigerants and is water-cooled.
The machine measures 1800 mm in length, 1200 mm in width, and 2050 mm in height, weighing approximately 940 kg. The test chamber itself measures 770 mm wide, 650 mm deep, and 610 mm high.
Additional features include a control panel with keypad and display mounted on the right side, facilitating easy operation. The exterior shows no visible signs of damage or rust, and the machine appears clean and intact. Electrical cables and hoses are connected at the back, leading to external equipment, with all panels and connections appearing intact.
Year of manufacture: 1998
Status: Sold as-is, where-is.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2009 |
| Offers online | 24 |
| Last activity | Sept. 29, 2026 |
Лабораторен инкубатор Vötsch VT 7030 S2
Laboratorní inkubátor Vötsch VT 7030 S2
Vötsch VT 7030 S2 Laboratorieinkubator
Vötsch VT 7030 S2 Laborinkubator
Εργαστηριακός επωαστήρας Vötsch VT 7030 S2
Vötsch VT 7030 S2 Laboratory incubator
Incubadora de laboratorio Vötsch VT 7030 S2
Incubateur de laboratoire Vötsch VT 7030 S2
Laboratorijski inkubator Vötsch VT 7030 S2
Vötsch VT 7030 S2 Laboratóriumi inkubátor
Incubatore da laboratorio Vötsch VT 7030 S2
Vötsch VT 7030 S2 Laboratorinis inkubatorius
Vötsch VT 7030 S2 Laboratoriumincubator
Inkubator laboratoryjny Vötsch VT 7030 S2
Incubadora de laboratório Vötsch VT 7030 S2
Incubator de laborator Vötsch VT 7030 S2
Vötsch VT 7030 S2 Лабораторный инкубатор
Laboratorijski inkubator Vötsch VT 7030 S2
Vötsch VT 7030 S2 Laboratorieinkubator
Laboratuvar inkübatörü Vötsch VT 7030 S2
EN
- Languages
English (GB)