Contact us to receive an offer.
| Manufacturer | Vötsch |
|---|---|
| Model | VT 7012 S2 |
| Year | |
| Location | Germany
|
The Vötsch VT 7012 S2 is a temperature shock test chamber designed for evaluating the durability of components, devices, and products under rapid temperature changes. This system subjects test specimens to alternating high and low temperature cycles in air, simulating extreme environmental conditions to identify potential weaknesses and accelerate aging effects.
This model features a vertical arrangement of test chambers and a ball screw drive to ensure safe guidance of the test car. The car has a load capacity of 50 kg and is equipped with all-round grilles to securely hold the test specimens. The chamber offers high air circulation rates, enabling short temperature change times and even temperature distribution within the test room.
The hot chamber can function as a temperature storage device, while the cold chamber serves as a temperature change device. Temperature ranges include +50°C to +220°C for the hot chamber and -70°C to +70°C for the cold chamber. Temperature deviation is maintained within ±2 K both over time and spatially within the car during steady state conditions.
The unit includes a touch panel for convenient editing of simulation programs with a graphic display. It is designed for minimal energy consumption and does not require compressed air. The test chamber volume is 120 liters, with internal dimensions of 470 mm width, 650 mm depth, and 410 mm height. External dimensions measure 930 mm wide, 2115 mm deep, and 1970 mm high, with a total weight of approximately 1000 kg.
Additional features observed include a control panel mounted on the right side, which currently displays an 'ERROR' message, and an upper chamber window with an orange seal and caution sign. A signal tower light with red, yellow, and green indicators is mounted on top. The exterior shows minor scuffs and scratches, consistent with typical industrial use.
Electrical specifications include a rated voltage of 400 V, rated power of 10 kW, and rated current of 25 A. The refrigerant used is R452A. Protection classes are IP42 for the device, IP20 for the control unit, and IP54 for the control cabinet.
This Vötsch VT 7012 S2 shock test cabinet is suitable for laboratories and industrial environments requiring precise and reliable temperature shock testing to assess product resilience under extreme temperature fluctuations.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Vötsch shock test cabinet VT 7012 S2
Systems for extreme temperature changes
Temperature shock testing assesses the resistance of components, devices, and other products to rapid changes in ambient temperature.
The test specimens are exposed to rapid temperature changes in air with alternating upper and lower temperature loads.
These cyclic loads and the accelerated aging caused by temperature changes can reveal weak points in the test specimen.
Vertical arrangement of the test chambers
Ball screw drive for safe guidance of the car
Car load capacity 50 kg for VT3 7012 S2
All-round grilles in the car secure the test specimens
High air circulation rate, short temperature change times and even temperature distribution in the test room
Hot chamber can be used as a temperature storage device, cold chamber as a temperature change device
Touch panel for convenient editing of the simulation programs with graphic display
Minimal energy consumption
No compressed air required
Manufacturer: Vötsch
Type: VT 7012 S2
Type: Temperature shock test chamber
Test chamber volume: 120 l
Rated voltage: 400 V
Rated power: 10 kW
Rated current: 25 A
Refrigerant: R452A
External dimensions
Width: 930 mm
Depth: 2115 mm
Height: 1970 mm
Test room dimensions
Width: 470 mm
Depth: 650 mm
Height: 410 mm
Year of construction: 2005
Protection class
device: IP 42
Control unit: IP20
Control cabinet: IP 54
Characteristic values for temperature tests in single-chamber operation |
Temperature range
hot chamber: +50°C to +220°C
cold chamber -70°C to +70°C
Temperature deviation over time: +_ 2 K
in steady state
Temperature deviation spatially: +_2K
in steady state in the car
Heating rate hot chamber: 11 K/min
Cooling rate cold chamber: K/min
Heating rate cold chamber: 2 K/min
Cooling rate hot chamber: K/min
Observation window: 355 x 355 mm
Pipe penetration: 67 mm
Weight: 1000 kg
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Machinery dealer |
| Active since | 2009 |
| Offers online | 24 |
| Last activity | Sept. 29, 2026 |
Vötsch shock test cabinet VT 7012 S2
Systems for extreme temperature changes
Temperature shock testing assesses the resistance of components, devices, and other products to rapid changes in ambient temperature.
The test specimens are exposed to rapid temperature changes in air with alternating upper and lower temperature loads.
These cyclic loads and the accelerated aging caused by temperature changes can reveal weak points in the test specimen.
Vertical arrangement of the test chambers
Ball screw drive for safe guidance of the car
Car load capacity 50 kg for VT3 7012 S2
All-round grilles in the car secure the test specimens
High air circulation rate, short temperature change times and even temperature distribution in the test room
Hot chamber can be used as a temperature storage device, cold chamber as a temperature change device
Touch panel for convenient editing of the simulation programs with graphic display
Minimal energy consumption
No compressed air required
Manufacturer: Vötsch
Type: VT 7012 S2
Type: Temperature shock test chamber
Test chamber volume: 120 l
Rated voltage: 400 V
Rated power: 10 kW
Rated current: 25 A
Refrigerant: R452A
External dimensions
Width: 930 mm
Depth: 2115 mm
Height: 1970 mm
Test room dimensions
Width: 470 mm
Depth: 650 mm
Height: 410 mm
Year of construction: 2005
Protection class
device: IP 42
Control unit: IP20
Control cabinet: IP 54
Characteristic values for temperature tests in single-chamber operation |
Temperature range
hot chamber: +50°C to +220°C
cold chamber -70°C to +70°C
Temperature deviation over time: +_ 2 K
in steady state
Temperature deviation spatially: +_2K
in steady state in the car
Heating rate hot chamber: 11 K/min
Cooling rate cold chamber: K/min
Heating rate cold chamber: 2 K/min
Cooling rate hot chamber: K/min
Observation window: 355 x 355 mm
Pipe penetration: 67 mm
Weight: 1000 kg
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
The Vötsch VT 7012 S2 is a temperature shock test chamber designed for evaluating the durability of components, devices, and products under rapid temperature changes. This system subjects test specimens to alternating high and low temperature cycles in air, simulating extreme environmental conditions to identify potential weaknesses and accelerate aging effects.
This model features a vertical arrangement of test chambers and a ball screw drive to ensure safe guidance of the test car. The car has a load capacity of 50 kg and is equipped with all-round grilles to securely hold the test specimens. The chamber offers high air circulation rates, enabling short temperature change times and even temperature distribution within the test room.
The hot chamber can function as a temperature storage device, while the cold chamber serves as a temperature change device. Temperature ranges include +50°C to +220°C for the hot chamber and -70°C to +70°C for the cold chamber. Temperature deviation is maintained within ±2 K both over time and spatially within the car during steady state conditions.
The unit includes a touch panel for convenient editing of simulation programs with a graphic display. It is designed for minimal energy consumption and does not require compressed air. The test chamber volume is 120 liters, with internal dimensions of 470 mm width, 650 mm depth, and 410 mm height. External dimensions measure 930 mm wide, 2115 mm deep, and 1970 mm high, with a total weight of approximately 1000 kg.
Additional features observed include a control panel mounted on the right side, which currently displays an 'ERROR' message, and an upper chamber window with an orange seal and caution sign. A signal tower light with red, yellow, and green indicators is mounted on top. The exterior shows minor scuffs and scratches, consistent with typical industrial use.
Electrical specifications include a rated voltage of 400 V, rated power of 10 kW, and rated current of 25 A. The refrigerant used is R452A. Protection classes are IP42 for the device, IP20 for the control unit, and IP54 for the control cabinet.
This Vötsch VT 7012 S2 shock test cabinet is suitable for laboratories and industrial environments requiring precise and reliable temperature shock testing to assess product resilience under extreme temperature fluctuations.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2009 |
| Offers online | 24 |
| Last activity | Sept. 29, 2026 |
Лабораторен инкубатор Vötsch VT 7012 S2
Laboratorní inkubátor Vötsch VT 7012 S2
Vötsch VT 7012 S2 Laboratorieinkubator
Vötsch VT 7012 S2 Laborinkubator
Εργαστηριακός επωαστήρας Vötsch VT 7012 S2
Vötsch VT 7012 S2 Laboratory incubator
Incubadora de laboratorio Vötsch VT 7012 S2
Incubateur de laboratoire Vötsch VT 7012 S2
Laboratorijski inkubator Vötsch VT 7012 S2
Vötsch VT 7012 S2 Laboratóriumi inkubátor
Incubatore da laboratorio Vötsch VT 7012 S2
Vötsch VT 7012 S2 Laboratorinis inkubatorius
Vötsch VT 7012 S2 Laboratoriumincubator
Inkubator laboratoryjny Vötsch VT 7012 S2
Incubadora de laboratório Vötsch VT 7012 S2
Incubator de laborator Vötsch VT 7012 S2
Vötsch VT 7012 S2 Лабораторный инкубатор
Laboratorijski inkubator Vötsch VT 7012 S2
Vötsch VT 7012 S2 Laboratorieinkubator
Laboratuvar inkübatörü Vötsch VT 7012 S2
EN
- Languages
English (GB)