| Manufacturer | Victor |
|---|---|
| Model | Vcenter 70 - APC |
| Year | 2004 |
| Location | Slovenia
|
The Victor Vcenter 70 - APC is a vertical machining center manufactured in 2004, designed for high-quality milling operations with three axes of movement. It features a 24-tool automatic tool changer (ATC) with a random bi-directional tool selection system, accommodating tools up to 76 mm in diameter, 250 mm in length, and weighing up to 7 kg. The spindle uses BT.40 tooling and supports rigid tapping, enhancing its versatility for various machining tasks.
This machine offers rapid traverse rates of 30 m/min on the X and Y axes and 24 m/min on the Z axis, with cutting feed rates adjustable up to 5000 mm/min. It includes a flood coolant system to assist with temperature control and chip removal during machining.
The machine's footprint measures 1950 mm in length by 2020 mm in width, with an overall height of 2715 mm and a weight of approximately 4000 kg. It requires a 415-volt, 3-phase electrical supply and a minimum 80 psi air supply.
Additional features include a chip conveyor for efficient chip disposal, an automatic power-off system, automatic lubrication, and a centralized pendant operation panel with built-in work light. Safety features visible include an emergency stop button and a warning sign for electrical hazards on the front panel. The machine shows some signs of wear, such as paint chipping on the lower front panel, which is typical for used equipment.
Accessories and conveniences include levelling blocks, a tool box with hand tools, coolant flush on bottom guarding, an air conditioner for the electrical cabinet, and a spindle oil cooler. The coolant tank has a capacity of 100 liters, supported by an 80-liter pump delivery rate with a 1/4 hp motor. The hydraulics tank holds 30 liters, with a maximum pressure of 35 kg/cm².
This Victor Vcenter 70 - APC vertical machining center is suited for users seeking a robust and capable machine with a comprehensive set of features for precision milling and machining.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
This 3-axis Victor Vcenter 70 - APC vertical machining center was manufactured in 2004. It features a rapid traverse rate of 30/30/24 m/min, a cutting feed rate up to 5000 mm/min, and an automatic tool changer with a 24-tool capacity. The machine includes a BT.40 spindle, rigid tapping, and a flood coolant system. If you are looking to get high-quality milling capabilities, consider the Victor Vcenter 70 - APC machine we have for sale. Contact us for more information.
Machine weight: 4000 kg
Brand: FANUC
Model: Oi-MD control
Number of axis: 3
Chip conveyor: Yes
Automatic tool changer
Tool magazine capacity: 24 / Tool selection system: Random bi-directional / Tool diameter, maximum: 76 mm / Tool length, maximum: 250 mm / Tool weight, maximum: 7 kg
Spindle tooling: BT.40 / Tool change time: 2.5 sec
Rigid tapping / Flood coolant system / Totally enclosed guarding / Automatic Power Off system / Automatic lubrication system
Centralised pendant operation panel / Built-in work light / Levelling blocks / Tool box and hand tools / Warning light
Operating manual, parts list, Fanuc manuals / Coolant flush on bottom guarding / Air conditioner for electrical cabinet / Spindle oil cooler (Habor)
Chip conveyor & cart - left disposal / Oil Skimmer / Handy coolant gun (Shower gun) / Tool length measurement (Renishaw TS-27R)
Coolant Tank capacity: 100 litres / Pump delivery rate: 80 litres / Pump motor: 1/4 hp / Hydraulics Tank capacity: 30 litres / Pressure Maximum: 35 Kg/sq.cm
Rapid traverse rate x/y/z: 30/30/24 m/min / cutting feed rate: 1-5000 mm/min
Floor space required: 1950 x 2020 mm
Overall machine height: 2715 mm
Electrical: 415 volt, 3 phase, 50 cycles 40 amp line service
Air: 80 psi min, 1/2" air supply line min
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Machinery dealer |
| Active since | 2019 |
| Offers online | 2041 |
| Last activity | Nov. 2, 2026 |
GINDUMAC GmbH is a dynamic German company specializing in the global trade of used industrial machinery. Our international team of more than 30 employees supports manufacturers worldwide in buying and selling high-quality used equipment across sectors such as metalworking, sheet metal, plastics, woodworking, and automation.
Through a data-driven, digital approach, the company delivers accurate machine valuations, professional inspections, and end-to-end transaction management — ensuring a transparent, secure, and efficient sales process for both buyers and sellers.
This 3-axis Victor Vcenter 70 - APC vertical machining center was manufactured in 2004. It features a rapid traverse rate of 30/30/24 m/min, a cutting feed rate up to 5000 mm/min, and an automatic tool changer with a 24-tool capacity. The machine includes a BT.40 spindle, rigid tapping, and a flood coolant system. If you are looking to get high-quality milling capabilities, consider the Victor Vcenter 70 - APC machine we have for sale. Contact us for more information.
Machine weight: 4000 kg
Brand: FANUC
Model: Oi-MD control
Number of axis: 3
Chip conveyor: Yes
Automatic tool changer
Tool magazine capacity: 24 / Tool selection system: Random bi-directional / Tool diameter, maximum: 76 mm / Tool length, maximum: 250 mm / Tool weight, maximum: 7 kg
Spindle tooling: BT.40 / Tool change time: 2.5 sec
Rigid tapping / Flood coolant system / Totally enclosed guarding / Automatic Power Off system / Automatic lubrication system
Centralised pendant operation panel / Built-in work light / Levelling blocks / Tool box and hand tools / Warning light
Operating manual, parts list, Fanuc manuals / Coolant flush on bottom guarding / Air conditioner for electrical cabinet / Spindle oil cooler (Habor)
Chip conveyor & cart - left disposal / Oil Skimmer / Handy coolant gun (Shower gun) / Tool length measurement (Renishaw TS-27R)
Coolant Tank capacity: 100 litres / Pump delivery rate: 80 litres / Pump motor: 1/4 hp / Hydraulics Tank capacity: 30 litres / Pressure Maximum: 35 Kg/sq.cm
Rapid traverse rate x/y/z: 30/30/24 m/min / cutting feed rate: 1-5000 mm/min
Floor space required: 1950 x 2020 mm
Overall machine height: 2715 mm
Electrical: 415 volt, 3 phase, 50 cycles 40 amp line service
Air: 80 psi min, 1/2" air supply line min
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
The Victor Vcenter 70 - APC is a vertical machining center manufactured in 2004, designed for high-quality milling operations with three axes of movement. It features a 24-tool automatic tool changer (ATC) with a random bi-directional tool selection system, accommodating tools up to 76 mm in diameter, 250 mm in length, and weighing up to 7 kg. The spindle uses BT.40 tooling and supports rigid tapping, enhancing its versatility for various machining tasks.
This machine offers rapid traverse rates of 30 m/min on the X and Y axes and 24 m/min on the Z axis, with cutting feed rates adjustable up to 5000 mm/min. It includes a flood coolant system to assist with temperature control and chip removal during machining.
The machine's footprint measures 1950 mm in length by 2020 mm in width, with an overall height of 2715 mm and a weight of approximately 4000 kg. It requires a 415-volt, 3-phase electrical supply and a minimum 80 psi air supply.
Additional features include a chip conveyor for efficient chip disposal, an automatic power-off system, automatic lubrication, and a centralized pendant operation panel with built-in work light. Safety features visible include an emergency stop button and a warning sign for electrical hazards on the front panel. The machine shows some signs of wear, such as paint chipping on the lower front panel, which is typical for used equipment.
Accessories and conveniences include levelling blocks, a tool box with hand tools, coolant flush on bottom guarding, an air conditioner for the electrical cabinet, and a spindle oil cooler. The coolant tank has a capacity of 100 liters, supported by an 80-liter pump delivery rate with a 1/4 hp motor. The hydraulics tank holds 30 liters, with a maximum pressure of 35 kg/cm².
This Victor Vcenter 70 - APC vertical machining center is suited for users seeking a robust and capable machine with a comprehensive set of features for precision milling and machining.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2019 |
| Offers online | 2041 |
| Last activity | Nov. 2, 2026 |
GINDUMAC GmbH is a dynamic German company specializing in the global trade of used industrial machinery. Our international team of more than 30 employees supports manufacturers worldwide in buying and selling high-quality used equipment across sectors such as metalworking, sheet metal, plastics, woodworking, and automation.
Through a data-driven, digital approach, the company delivers accurate machine valuations, professional inspections, and end-to-end transaction management — ensuring a transparent, secure, and efficient sales process for both buyers and sellers.
Обработващ център - вертикален Victor Vcenter 70 - APC
Obráběcí centrum - vertikální Victor Vcenter 70 - APC
Victor Vcenter 70 - APC Bearbejdningscenter - lodret
Victor Vcenter 70 - APC Bearbeitungszentrum Vertikal
Κέντρο κατεργασίας - κατακόρυφο Victor Vcenter 70 - APC
Victor Vcenter 70 - APC Machining center - vertical
Centro de mecanizado vertical Victor Vcenter 70 - APC
Centre d'usinage vertical Victor Vcenter 70 - APC
Obradni centar - vertikalni Victor Vcenter 70 - APC
Victor Vcenter 70 - APC Megmunkáló központ - függőleges
Centro di lavoro verticale Victor Vcenter 70 - APC
Apdirbimo centras – vertikalus Victor Vcenter 70 - APC
Victor Vcenter 70 - APC Bewerkingscentrum - verticaal
Pionowe centrum obróbcze Victor Vcenter 70 - APC
Centro de usinagem - vertical Victor Vcenter 70 - APC
Centru de prelucrare - vertical Victor Vcenter 70 - APC
Victor Vcenter 70 - APC Вертикальный обрабатывающий центр
Obradni centar - vertikalni Victor Vcenter 70 - APC
Victor Vcenter 70 - APC Bearbetningscentrum - vertikalt
Dikey işleme merkezi Victor Vcenter 70 - APC
EN
- Languages
English (GB)