Price on request
View price| ------------------- | |
| worked hours | |
| hours under power | |
| state | like new |
| At local norms | --------- |
| status | visible |
| Last availability date | 10/06/2026 |
This listing features a VBC Series 3 welding lathe equipped with a Miller Maxstar 400 amp DC TIG welding system. The machine includes a solid headstock fitted with a 400mm diameter chuck and an integral weld current return brush-gear rated at 400 amps. It offers a speed range from 0.20 to 3.5 rpm. The lathe can accommodate components up to 3000mm in length and a maximum weight of 600 kg.
The floor-standing main frame is fabricated from steel RHS and comes with adjustable feet for leveling on factory floors. It is also equipped with lifting eyes for easier handling. The sliding tailstock is mounted on linear guide rail carriages that run on continuously supported hardened and ground linear guide rails. This tailstock can be locked in any position along the length of the bed.
The machine includes a sliding tooling faceplate arrangement controlled by a pneumatic cylinder that provides a two-stage pressure thrust force. Two adjustable idlers are supplied, allowing manual linear movement between the headstock and tailstock. Each idler can be adjusted in height to support material diameters ranging from 100mm to 150mm and can be locked in place along the length.
The VBC Automatic Weld Controller features an intuitive multilevel control system with 15 stages. It includes PWM drive for rotation, cold wire feeder controls, AVC controls, rotation controls, weld current and pulsing controls, and a separate outlet for the linear drive of the torch position. A motorized linear slide for torch attachment is included, enabling programmed torch height adjustment via the multilevel control program. The system supports memory upgrades to 128 programs and is fitted to a remote 350A weld set with water cooling.
Additional features include the VBCIE Arc Length Controller, which maintains constant weld penetration, and a torch positioning system mounted on a pneumatic slide to assist with loading and unloading parts. The torch positioner offers 3-axis adjustment and AVC with 75mm movement, including touch and retract functions. Wire feed parameters support pulsed or continuous feed modes with a feed speed range of 50 to 2500 mm/min.
The machine appears clean and in good condition with minor scuffs. It is painted blue and labeled 'VBC Instrument Engineering.' Two circular components are located at each end of the machine, and a yellow caution label is visible on the left component.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
As new a VBC Welding Lathe fitted with NEW Miller Maxstar 400 amp DC TIG welding system
Solid headstock supplied with a 400mm diameter Chuck. Integral Weld current return brush-gear rated at 400 amps Speed Range : 0.20 to 3.5 rpm
Capacity: Maximum Component Length: 3000mm. Maximum Component Weight: 600 Kgs
Floor standing main frame fabricated from steel RHS. Provided with adjustable feet for levelling to factory floor. Provided with lifting eyes.
Tailstock Sliding tailstock mounted on linear guide rail carriages running on continuously supported hardened and ground linear guide rails Lockable in any position along length of bed
Fitted with sliding tooling faceplate arrangement controlled by pneumatic cylinder, Cylinder to exert a two stage pressure thrust force
Adjustable Idlers two adjustable Idlers supplied. Manual linear movement available between the headstock and tailstock. Each Idler can be adjusted in height to support material diameters 100mm to 150mm. Each Idler can be locked in place along the length
VBC Automatic Weld Controller Easy to use intuitive control structure, Multilevel control (15 Stages)
Supplied with PWM drive (rotation), Cold wire feeder controls, AVC controls, Rotation controls, Weld current and pulsing controls, and separate outlet for the linear drive of torch position,
Motorised Linear slide to attach to the torch included to control weld height during your weld procedure, torch height adjustment programmed via the multilevel control program Memory upgrade to 128 programs, Fitted to remote 350A weld set and water cool
VBCIE Arc Length Controller Automatically maintains constant weld penetration
Torch positioning and controls mounted on the pneumatic slide to assist with loading and unloading the parts. Torch Positioner with 3 axis torch adjustment AVC with 75mm movement with touch and retract functions
Wire Feed Parameters Pulsed or continuous feed modes. Feed Speed - range 50-2500mm/min
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
What welder is included with this VBC Series 3 Welding Lathe?
This VBC Series 3 Welding Lathe is equipped with a new Miller Maxstar 400 amp DC TIG welder.
What is the speed range of the machine?
This welding lathe has a speed range of 0.20 to 3.5 RPM.
What is the maximum component length for this model?
This VBC Series 3 Welding Lathe has a maximum component length of 3000 mm.
What is the maximum weight capacity of the machine?
This equipment can handle a maximum component weight of 600 kg.
What diameter chuck does this VBC Series 3 Welding Lathe have?
This VBC Series 3 Welding Lathe features a solid headstock supplied with a 400 mm diameter chuck.
Does the machine have a sliding tailstock?
This equipment includes a sliding tailstock mounted on linear guide rail carriages.
How many stages does the automatic weld controller have?
This VBC Series 3 Welding Lathe features an automatic weld controller with a multilevel control structure of 15 stages.
What is the maximum diameter for this VBC Instrument Engineering Welding Lathe?
This VBC Instrument Engineering Welding Lathe has a maximum diameter of 230 mm when using the through chuck.
The following questions and answers are generated using artificial intelligence based on the product information available. They are provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2019 |
| Offers online | 187 |
| Last activity | June 10, 2026 |
As new a VBC Welding Lathe fitted with NEW Miller Maxstar 400 amp DC TIG welding system
Solid headstock supplied with a 400mm diameter Chuck. Integral Weld current return brush-gear rated at 400 amps Speed Range : 0.20 to 3.5 rpm
Capacity: Maximum Component Length: 3000mm. Maximum Component Weight: 600 Kgs
Floor standing main frame fabricated from steel RHS. Provided with adjustable feet for levelling to factory floor. Provided with lifting eyes.
Tailstock Sliding tailstock mounted on linear guide rail carriages running on continuously supported hardened and ground linear guide rails Lockable in any position along length of bed
Fitted with sliding tooling faceplate arrangement controlled by pneumatic cylinder, Cylinder to exert a two stage pressure thrust force
Adjustable Idlers two adjustable Idlers supplied. Manual linear movement available between the headstock and tailstock. Each Idler can be adjusted in height to support material diameters 100mm to 150mm. Each Idler can be locked in place along the length
VBC Automatic Weld Controller Easy to use intuitive control structure, Multilevel control (15 Stages)
Supplied with PWM drive (rotation), Cold wire feeder controls, AVC controls, Rotation controls, Weld current and pulsing controls, and separate outlet for the linear drive of torch position,
Motorised Linear slide to attach to the torch included to control weld height during your weld procedure, torch height adjustment programmed via the multilevel control program Memory upgrade to 128 programs, Fitted to remote 350A weld set and water cool
VBCIE Arc Length Controller Automatically maintains constant weld penetration
Torch positioning and controls mounted on the pneumatic slide to assist with loading and unloading the parts. Torch Positioner with 3 axis torch adjustment AVC with 75mm movement with touch and retract functions
Wire Feed Parameters Pulsed or continuous feed modes. Feed Speed - range 50-2500mm/min
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
What welder is included with this VBC Series 3 Welding Lathe?
This VBC Series 3 Welding Lathe is equipped with a new Miller Maxstar 400 amp DC TIG welder.
What is the speed range of the machine?
This welding lathe has a speed range of 0.20 to 3.5 RPM.
What is the maximum component length for this model?
This VBC Series 3 Welding Lathe has a maximum component length of 3000 mm.
What is the maximum weight capacity of the machine?
This equipment can handle a maximum component weight of 600 kg.
What diameter chuck does this VBC Series 3 Welding Lathe have?
This VBC Series 3 Welding Lathe features a solid headstock supplied with a 400 mm diameter chuck.
Does the machine have a sliding tailstock?
This equipment includes a sliding tailstock mounted on linear guide rail carriages.
How many stages does the automatic weld controller have?
This VBC Series 3 Welding Lathe features an automatic weld controller with a multilevel control structure of 15 stages.
What is the maximum diameter for this VBC Instrument Engineering Welding Lathe?
This VBC Instrument Engineering Welding Lathe has a maximum diameter of 230 mm when using the through chuck.
The following questions and answers are generated using artificial intelligence based on the product information available. They are provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| ------------------- | |
| worked hours | |
| hours under power | |
| state | like new |
| At local norms | --------- |
| status | visible |
| Last availability date | 10/06/2026 |
This listing features a VBC Series 3 welding lathe equipped with a Miller Maxstar 400 amp DC TIG welding system. The machine includes a solid headstock fitted with a 400mm diameter chuck and an integral weld current return brush-gear rated at 400 amps. It offers a speed range from 0.20 to 3.5 rpm. The lathe can accommodate components up to 3000mm in length and a maximum weight of 600 kg.
The floor-standing main frame is fabricated from steel RHS and comes with adjustable feet for leveling on factory floors. It is also equipped with lifting eyes for easier handling. The sliding tailstock is mounted on linear guide rail carriages that run on continuously supported hardened and ground linear guide rails. This tailstock can be locked in any position along the length of the bed.
The machine includes a sliding tooling faceplate arrangement controlled by a pneumatic cylinder that provides a two-stage pressure thrust force. Two adjustable idlers are supplied, allowing manual linear movement between the headstock and tailstock. Each idler can be adjusted in height to support material diameters ranging from 100mm to 150mm and can be locked in place along the length.
The VBC Automatic Weld Controller features an intuitive multilevel control system with 15 stages. It includes PWM drive for rotation, cold wire feeder controls, AVC controls, rotation controls, weld current and pulsing controls, and a separate outlet for the linear drive of the torch position. A motorized linear slide for torch attachment is included, enabling programmed torch height adjustment via the multilevel control program. The system supports memory upgrades to 128 programs and is fitted to a remote 350A weld set with water cooling.
Additional features include the VBCIE Arc Length Controller, which maintains constant weld penetration, and a torch positioning system mounted on a pneumatic slide to assist with loading and unloading parts. The torch positioner offers 3-axis adjustment and AVC with 75mm movement, including touch and retract functions. Wire feed parameters support pulsed or continuous feed modes with a feed speed range of 50 to 2500 mm/min.
The machine appears clean and in good condition with minor scuffs. It is painted blue and labeled 'VBC Instrument Engineering.' Two circular components are located at each end of the machine, and a yellow caution label is visible on the left component.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2019 |
| Offers online | 187 |
| Last activity | June 10, 2026 |
Заваръчен струг VBC Серия 3
Svařovací soustruh VBC řady 3
VBC serie 3 svejsedrejebænk
VBC Serie 3 Schweißdrehmaschine
Τόρνος συγκόλλησης VBC Series 3
VBC Series 3 Welding Lathe
Torno de soldadura VBC Serie 3
Tour de soudage VBC série 3
VBC serija 3 strug za zavarivanje
VBC Series 3 hegesztő eszterga
Tornio per saldatura VBC Serie 3
VBC 3 serijos suvirinimo staklės
VBC serie 3 lasdraaibank
Tokarka spawalnicza VBC Series 3
Torno de soldadura VBC Série 3
Strung de sudură VBC Seria 3
Сварочный токарный станок VBC серии 3
Strug za zavarivanje VBC serije 3
VBC serie 3 svetssvarv
VBC Seri 3 Kaynak Tornası
EN
- Languages
English (GB)