Contact us to receive an offer.
| Manufacturer | UZINA ARAD |
|---|---|
| Model | SNA 500 x 1000 |
| Year | 1980 |
| Location | Poland
|
This listing is for a UZINA ARAD universal lathe, model SNA 500 x 1000, manufactured in 1980. The machine is designed for versatile turning operations with a maximum turning diameter of 740 mm in the bridge selection, 500 mm above the bed, and 260 mm above the transversing slide. It features a spindle through hole diameter of 64 mm and a maximum turning length between centers of 1000 mm. The spindle rotation speed ranges from 16 to 1600 rpm, powered by a spindle motor rated at 7.5 kW. The lathe uses a 3-jaw type chuck for workpiece holding.
The overall dimensions of the machine are 3800 mm in length, 1400 mm in width, and 1350 mm in height, with a total weight of approximately 1850 kg. The machine is equipped with control dials and levers for adjusting speed and feed settings, as well as handwheels and control knobs for manual operation. A work lamp is mounted on the lathe to enhance visibility during machining tasks.
Visible components include the chuck, carriage, tailstock, cross-slide, lead screw, and guide ways. The bed appears relatively clean and shiny, although some metal chips and residue are present in the base area. The machine shows signs of wear and use, including dirt, rust, and chipped paint on various parts such as the base, tailstock, carriage, and control panel, indicating extended use over time. The manufacturer plate and operational charts are affixed to the machine body, though they show scratches and signs of age.
This lathe is located in a workshop environment with surrounding shelving containing tools and parts, as well as a pallet jack nearby. Potential buyers may request a visual inspection and check the machine in motion to assess its condition further.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
SNA 500 x 1000 universal lathe.
Prod. UZINA ARAD. 1980.
Max. diameter of turning in the bridge selection 740mm.
Max. turning diameter over the bed 500mm.
Max. turning diameter over the slide 260mm.
Spindle through hole 64mm.
Max. length of turning in canine 1000 mm.
Spindle rotation range: 16 - 1600 rpm.
Motor power 10 kW.
Overall dimensions (length x width x height) 3800 x 1400 x 1350 mm.
Weight 1850 kg.
Technical condition of the machine good.
It is possible to make a visual inspection and check the machine in motion.
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
When was this UZINA ARAD SNA 500 x 1000 lathe manufactured?
This UZINA ARAD SNA 500 x 1000 lathe was manufactured in 1980.
What is the working length of this lathe?
This lathe has a working length of 1000 mm.
What is the swing over bed measurement of this UZINA ARAD SNA 500 x 1000 lathe?
This UZINA ARAD SNA 500 x 1000 lathe features a swing over bed of 500 mm.
The following questions and answers are generated using artificial intelligence based on the product information available. They are provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2015 |
| Offers online | 35 |
| Last activity | Oct. 15, 2026 |
SNA 500 x 1000 universal lathe.
Prod. UZINA ARAD. 1980.
Max. diameter of turning in the bridge selection 740mm.
Max. turning diameter over the bed 500mm.
Max. turning diameter over the slide 260mm.
Spindle through hole 64mm.
Max. length of turning in canine 1000 mm.
Spindle rotation range: 16 - 1600 rpm.
Motor power 10 kW.
Overall dimensions (length x width x height) 3800 x 1400 x 1350 mm.
Weight 1850 kg.
Technical condition of the machine good.
It is possible to make a visual inspection and check the machine in motion.
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
When was this UZINA ARAD SNA 500 x 1000 lathe manufactured?
This UZINA ARAD SNA 500 x 1000 lathe was manufactured in 1980.
What is the working length of this lathe?
This lathe has a working length of 1000 mm.
What is the swing over bed measurement of this UZINA ARAD SNA 500 x 1000 lathe?
This UZINA ARAD SNA 500 x 1000 lathe features a swing over bed of 500 mm.
The following questions and answers are generated using artificial intelligence based on the product information available. They are provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
This listing is for a UZINA ARAD universal lathe, model SNA 500 x 1000, manufactured in 1980. The machine is designed for versatile turning operations with a maximum turning diameter of 740 mm in the bridge selection, 500 mm above the bed, and 260 mm above the transversing slide. It features a spindle through hole diameter of 64 mm and a maximum turning length between centers of 1000 mm. The spindle rotation speed ranges from 16 to 1600 rpm, powered by a spindle motor rated at 7.5 kW. The lathe uses a 3-jaw type chuck for workpiece holding.
The overall dimensions of the machine are 3800 mm in length, 1400 mm in width, and 1350 mm in height, with a total weight of approximately 1850 kg. The machine is equipped with control dials and levers for adjusting speed and feed settings, as well as handwheels and control knobs for manual operation. A work lamp is mounted on the lathe to enhance visibility during machining tasks.
Visible components include the chuck, carriage, tailstock, cross-slide, lead screw, and guide ways. The bed appears relatively clean and shiny, although some metal chips and residue are present in the base area. The machine shows signs of wear and use, including dirt, rust, and chipped paint on various parts such as the base, tailstock, carriage, and control panel, indicating extended use over time. The manufacturer plate and operational charts are affixed to the machine body, though they show scratches and signs of age.
This lathe is located in a workshop environment with surrounding shelving containing tools and parts, as well as a pallet jack nearby. Potential buyers may request a visual inspection and check the machine in motion to assess its condition further.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2015 |
| Offers online | 35 |
| Last activity | Oct. 15, 2026 |
Austria
1992
| Length between centers | 1000 mm |
|---|---|
| Turning length | 1000 mm |
| Ø above transversing slide | 630 mm |
| Spindle nose | |
| Turning speed | 1250 rpm |
| Overhauled | no |
| Steady | no |
| Center height | 520 mm |
|---|---|
| Ø above the bed | 1040 mm |
| Diameter in the gap | 1400 mm |
| Spindle bore | 106 mm |
| Spindle motor power | 25 kW |
| Tailstock | no |
| Type of chuck | 3 jaw |
Czech Republic
1983
| Spindle nose | |
|---|---|
| Tailstock | no |
| Overhauled | no |
|---|---|
| Steady | no |
Czech Republic
1984
| Length between centers | mm |
|---|---|
| Turning length | 1000 mm |
| Ø above the bed | 500 mm |
| Diameter in the gap | 320 mm |
| Spindle nose | |
| Turning speed | rpm |
| Overhauled | no |
| Tailstock | no |
| Center height | mm |
|---|---|
| Turning Ø | 500 mm |
| Ø above transversing slide | 320 mm |
| Max workpiece weight | kg |
| Spindle bore | mm |
| Spindle motor power | kW |
| Year of overhauling | |
| Steady | no |
Austria
1992
| Spindle nose | |
|---|---|
| Tailstock | no |
| Overhauled | no |
|---|---|
| Steady | no |
Austria
2015
| Spindle nose | |
|---|---|
| Tailstock | no |
| Overhauled | no |
|---|---|
| Steady | no |
Czech Republic
1984
| Length between centers | mm |
|---|---|
| Turning length | mm |
| Ø above the bed | mm |
| Diameter in the gap | mm |
| Spindle nose | |
| Turning speed | rpm |
| Overhauled | no |
| Tailstock | no |
| Center height | mm |
|---|---|
| Turning Ø | mm |
| Ø above transversing slide | mm |
| Max workpiece weight | kg |
| Spindle bore | 67 mm |
| Spindle motor power | kW |
| Year of overhauling | |
| Steady | no |
Slovakia
1984
| Length between centers | 1500 mm |
|---|---|
| Turning Ø | 420 mm |
| Ø above transversing slide | 960 mm |
| Spindle nose | 315 |
| Turning speed | 1000 rpm |
| Overhauled | no |
| Steady | no |
| Turning length | 1500 mm |
|---|---|
| Ø above the bed | 710 mm |
| Diameter in the gap | 300 mm |
| Spindle bore | 71 mm |
| Spindle motor power | 7.5 kW |
| Tailstock | yes |
| Type of chuck | 3 jaw |
Czech Republic
1979
| Length between centers | 2000 mm |
|---|---|
| Ø above transversing slide | 270 mm |
| Spindle nose | |
| Overhauled | no |
| Steady | no |
| Ø above the bed | 500 mm |
|---|---|
| Max workpiece weight | 1815 kg |
| Spindle bore | 50.8 mm |
| Tailstock | no |
Austria
2023
| Spindle nose | |
|---|---|
| Tailstock | no |
| Overhauled | no |
|---|---|
| Steady | no |
Austria
2020
| Spindle nose | |
|---|---|
| Tailstock | no |
| Overhauled | no |
|---|---|
| Steady | no |
Austria
2001
| Spindle nose | |
|---|---|
| Tailstock | no |
| Overhauled | no |
|---|---|
| Steady | no |
Austria
2011
| Spindle nose | |
|---|---|
| Tailstock | no |
| Overhauled | no |
|---|---|
| Steady | no |
Czech Republic
1981
| Spindle nose | |
|---|---|
| Tailstock | no |
| Overhauled | no |
|---|---|
| Steady | no |
Germany
1991
| Length between centers | 2000 mm |
|---|---|
| Ø above transversing slide | 430 mm |
| Spindle nose | |
| Turning speed | 1800 rpm |
| Tailstock | no |
| Turning Ø | 720 mm |
|---|---|
| Max workpiece weight | 2500 kg |
| Spindle bore | 106 mm |
| Overhauled | no |
| Steady | no |
Poland
1989
| Spindle nose | |
|---|---|
| Tailstock | no |
| Overhauled | no |
|---|---|
| Steady | no |
France
| Spindle nose | |
|---|---|
| Tailstock | no |
| Overhauled | no |
|---|---|
| Steady | no |
Czech Republic
1976
| Spindle nose | |
|---|---|
| Tailstock | no |
| Overhauled | no |
|---|---|
| Steady | no |
Czech Republic
1993
| Turning length | 1250 mm |
|---|---|
| Ø above the bed | 380 mm |
| Diameter in the gap | 215 mm |
| Overhauled | no |
| Steady | no |
| Turning Ø | 380 mm |
|---|---|
| Ø above transversing slide | 215 mm |
| Spindle nose | |
| Tailstock | no |
Italy
1979
| Length between centers | 1500 mm |
|---|---|
| Ø above the bed | 350 mm |
| Spindle bore | 52 mm |
| Overhauled | no |
| Steady | no |
| Center height | 200 mm |
|---|---|
| Spindle nose | |
| Turning speed | 1600 rpm |
| Tailstock | no |
Czech Republic
1970
| Length between centers | 2000 mm |
|---|---|
| Ø above transversing slide | 250 mm |
| Overhauled | no |
| Steady | no |
| Turning Ø | 500 mm |
|---|---|
| Spindle nose | |
| Tailstock | no |
| Spindle nose | |
|---|---|
| Tailstock | no |
| Overhauled | no |
|---|---|
| Steady | no |
Poland
1986
| Length between centers | 1000 mm |
|---|---|
| Turning Ø | 350 mm |
| Ø above transversing slide | 200 mm |
| Spindle nose | |
| Spindle motor power | 4 kW |
| Tailstock | yes |
| Type of chuck | 3 jaw |
| Turning length | 1000 mm |
|---|---|
| Ø above the bed | 350 mm |
| Diameter in the gap | 36 mm |
| Turning speed | 2500 rpm |
| Overhauled | no |
| Steady | yes |
Austria
2016
| Spindle nose | HSK 63 |
|---|---|
| Spindle motor power | 37 kW |
| Tailstock | no |
| Turning speed | 12000 rpm |
|---|---|
| Overhauled | no |
| Steady | no |
Italy
1985
| Length between centers | mm |
|---|---|
| Turning length | mm |
| Ø above the bed | 1020 mm |
| Diameter in the gap | mm |
| Spindle nose | |
| Turning speed | 1300 rpm |
| Overhauled | no |
| Tailstock | no |
| Center height | mm |
|---|---|
| Turning Ø | mm |
| Ø above transversing slide | mm |
| Max workpiece weight | kg |
| Spindle bore | 360 mm |
| Spindle motor power | 74 kW |
| Year of overhauling | |
| Steady | no |
Spain
1978
| Ø above the bed | 1200 mm |
|---|---|
| Spindle nose | |
| Tailstock | no |
| Ø above transversing slide | 910 mm |
|---|---|
| Overhauled | no |
| Steady | no |
Austria
| Length between centers | 3000 mm |
|---|---|
| Ø above the bed | 530 mm |
| Diameter in the gap | 630 mm |
| Spindle bore | 45 mm |
| Spindle motor power | 15 kW |
| Tailstock | no |
| Type of chuck | 4 jaw |
| Center height | 265 mm |
|---|---|
| Ø above transversing slide | 340 mm |
| Spindle nose | |
| Turning speed | 281250 rpm |
| Overhauled | no |
| Steady | no |
Poland
1986
| Turning length | 2000 mm |
|---|---|
| Ø above transversing slide | 380 mm |
| Max workpiece weight | 1500 kg |
| Spindle bore | 90 mm |
| Spindle motor power | 15 kW |
| Tailstock | no |
| Ø above the bed | 630 mm |
|---|---|
| Diameter in the gap | 380 mm |
| Spindle nose | |
| Turning speed | 1800 rpm |
| Overhauled | no |
| Steady | no |
Poland
2018
| Length between centers | 2000 mm |
|---|---|
| Turning Ø | 560 mm |
| Ø above transversing slide | 340 mm |
| Spindle nose | |
| Turning speed | 1500 rpm |
| Overhauled | no |
| Steady | yes |
| Turning length | 2000 mm |
|---|---|
| Ø above the bed | 560 mm |
| Diameter in the gap | 85 mm |
| Spindle bore | 85 mm |
| Spindle motor power | 7.5 kW |
| Tailstock | yes |
| Type of chuck | 3 jaw |
Italy
1980
| Length between centers | 1500 mm |
|---|---|
| Turning length | 500 mm |
| Ø above the bed | 500 mm |
| Diameter in the gap | 740 mm |
| Spindle bore | 104 mm |
| Overhauled | no |
| Steady | no |
| Center height | 250 mm |
|---|---|
| Turning Ø | 250 mm |
| Ø above transversing slide | 324 mm |
| Spindle nose | |
| Turning speed | 1500 rpm |
| Tailstock | no |
Poland
1995
| Turning length | 2000 mm |
|---|---|
| Ø above transversing slide | 850 mm |
| Overhauled | no |
| Steady | no |
| Ø above the bed | 1150 mm |
|---|---|
| Spindle nose | |
| Tailstock | no |
струг UZINA ARAD SNA 500 x 1000
Soustruh UZINA ARAD SNA 500 x 1000
UZINA ARAD SNA 500 x 1000 drejebænk
UZINA ARAD SNA 500 x 1000 Drehmaschine
τόρνος UZINA ARAD SNA 500 x 1000
UZINA ARAD SNA 500 x 1000 lathe
Torno UZINA ARAD SNA 500 x 1000
Tour UZINA ARAD SNA 500 x 1000
tokarilica UZINA ARAD SNA 500 x 1000
UZINA ARAD SNA 500 x 1000 esztergapad
Tornio UZINA ARAD SNA 500 x 1000
tekinimo staklės UZINA ARAD SNA 500 x 1000
UZINA ARAD SNA 500 x 1000 draaibank
Tokarka UZINA ARAD SNA 500 x 1000
torno UZINA ARAD SNA 500 x 1000
strung UZINA ARAD SNA 500 x 1000
UZINA ARAD SNA 500 x 1000 Токарный станок
strug UZINA ARAD SNA 500 x 1000
UZINA ARAD SNA 500 x 1000 svarv
Torna UZINA ARAD SNA 500 x 1000
Belgium
EN
- Languages
English (GB)