Contact us to receive an offer.
| Manufacturer | USSR |
|---|---|
| Model | 165 |
| Year | |
| Location | Poland
|
This heavy-duty lathe model 165 x 5000 from the USSR is designed for machining large workpieces, featuring a robust construction with a heavy cast iron bed reinforced by ribbing for enhanced strength and stability. The lathe has a total length of 7500 mm, width of 2000 mm, and height of 1800 mm, weighing approximately 16,000 kg. It offers a turning length of 5000 mm between centers with a center height of 500 mm, allowing for the machining of sizable components. The maximum turning diameter above the bed is 1000 mm, and above the traversing slide, it is 600 mm. The spindle throughput diameter is 85 mm, accommodating substantial spindle sizes for heavy-duty operations.
The machine is equipped with a spindle-mounted chuck at the headstock end and a tailstock featuring a handwheel and spindle, with a Morse 5 taper bushing. The lathe bed includes a lead screw with a protective cover, and the carriage assembly comprises a cross slide and compound rest with adjustment handles, along with a tool post and handwheels for precise control. The headstock control panel contains various levers, dials, and speed charts, with labeling in Polish, reflecting the machine's origin and operational settings.
Condition-wise, the lathe shows visible signs of wear, including surface rust, paint wear, oil stains, and dirt accumulation on various components such as the bed, tailstock, carriage, and control panels. The electrical control panel is open, revealing wiring, relays, and circuit breakers that appear intact but aged, with dust present. Overall, this lathe is a substantial industrial machine suitable for heavy machining tasks, with all major components present and visible wear consistent with use in an industrial environment.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Heavy-duty lathe 165 x 5000; USSR;
Turning diameter above the bed: 1000 mm
Turning diameter over the slide: 600 mm
Turning length: 5000 mm
Spindle throughput: 85 mm
Tailstock bushing: Morse 5
Weight: 16 tons
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Machinery dealer |
| Active since | 2014 |
| Offers online | 16 |
| Last activity | Oct. 22, 2026 |
Heavy-duty lathe 165 x 5000; USSR;
Turning diameter above the bed: 1000 mm
Turning diameter over the slide: 600 mm
Turning length: 5000 mm
Spindle throughput: 85 mm
Tailstock bushing: Morse 5
Weight: 16 tons
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
This heavy-duty lathe model 165 x 5000 from the USSR is designed for machining large workpieces, featuring a robust construction with a heavy cast iron bed reinforced by ribbing for enhanced strength and stability. The lathe has a total length of 7500 mm, width of 2000 mm, and height of 1800 mm, weighing approximately 16,000 kg. It offers a turning length of 5000 mm between centers with a center height of 500 mm, allowing for the machining of sizable components. The maximum turning diameter above the bed is 1000 mm, and above the traversing slide, it is 600 mm. The spindle throughput diameter is 85 mm, accommodating substantial spindle sizes for heavy-duty operations.
The machine is equipped with a spindle-mounted chuck at the headstock end and a tailstock featuring a handwheel and spindle, with a Morse 5 taper bushing. The lathe bed includes a lead screw with a protective cover, and the carriage assembly comprises a cross slide and compound rest with adjustment handles, along with a tool post and handwheels for precise control. The headstock control panel contains various levers, dials, and speed charts, with labeling in Polish, reflecting the machine's origin and operational settings.
Condition-wise, the lathe shows visible signs of wear, including surface rust, paint wear, oil stains, and dirt accumulation on various components such as the bed, tailstock, carriage, and control panels. The electrical control panel is open, revealing wiring, relays, and circuit breakers that appear intact but aged, with dust present. Overall, this lathe is a substantial industrial machine suitable for heavy machining tasks, with all major components present and visible wear consistent with use in an industrial environment.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2014 |
| Offers online | 16 |
| Last activity | Oct. 22, 2026 |
| Center height | 400 mm |
|---|---|
| Tailstock | no |
| Overhauled | no |
|---|---|
| Steady | no |
Poland
1984
| Length between centers | 5000 mm |
|---|---|
| Turning length | 5000 mm |
| Ø above the bed | 1600 mm |
| Diameter in the gap | 105 mm |
| Max workpiece weight | 30000 kg |
| Overhauled | yes |
| Tailstock | yes |
| Type of chuck | 4 jaw |
| Max. turning diameter | 1600 mm |
|---|---|
| Center height | 800 mm |
| Ø above transversing slide | 1280 mm |
| Faceplate diameter | 1600 mm |
| Spindle motor power | 75 kW |
| Year of overhauling | 2026 |
| Steady | no |
Poland
1983
| Length between centers | 10000 mm |
|---|---|
| Turning length | 10000 mm |
| Ø above transversing slide | 500 mm |
| Turning speed | 800 rpm |
| Overhauled | no |
| Steady | yes |
| Max. turning diameter | 1050 mm |
|---|---|
| Ø above the bed | 800 mm |
| Diameter in the gap | 95 mm |
| Spindle motor power | 22 kW |
| Tailstock | yes |
| Type of chuck | 3 jaw |
Poland
1982
| Length between centers | 5000 mm |
|---|---|
| Turning length | 5000 mm |
| Ø above transversing slide | 630 mm |
| Max workpiece weight | 12000 kg |
| Turning speed | -1 rpm |
| Tailstock | yes |
| Type of chuck | 4 jaw |
| Max. turning diameter | 1250 mm |
|---|---|
| Ø above the bed | 1000 mm |
| Diameter in the gap | 1250 mm |
| Spindle bore | 120 mm |
| Overhauled | no |
| Steady | yes |
Poland
1984
| Length between centers | 5000 mm |
|---|---|
| Ø above the bed | 930 mm |
| Max workpiece weight | 9000 kg |
| Turning speed | 800 rpm |
| Tailstock | no |
| Type of chuck | 4 jaw |
| Turning length | 5000 mm |
|---|---|
| Diameter in the gap | 1200 mm |
| Spindle bore | 95 mm |
| Overhauled | no |
| Steady | no |
Belgium
| Length between centers | 3000 mm |
|---|---|
| Turning length | 3000 mm |
| Ø above the bed | 630 mm |
| Diameter in the gap | mm |
| Max workpiece weight | kg |
| Turning speed | 1120 rpm |
| Overhauled | no |
| Tailstock | no |
| Max. turning diameter | 630 mm |
|---|---|
| Center height | mm |
| Ø above transversing slide | mm |
| Faceplate diameter | mm |
| Spindle bore | 72 mm |
| Spindle motor power | kW |
| Year of overhauling | |
| Steady | no |
| Length between centers | 3000 mm |
|---|---|
| Ø above transversing slide | 630 mm |
| Spindle bore | 95 mm |
| Tailstock | no |
| Ø above the bed | 930 mm |
|---|---|
| Diameter in the gap | 1200 mm |
| Overhauled | no |
| Steady | no |
Poland
1983
| Length between centers | 6000 mm |
|---|---|
| Turning length | 6000 mm |
| Ø above the bed | 800 mm |
| Diameter in the gap | 95 mm |
| Spindle motor power | 25 kW |
| Tailstock | yes |
| Max. turning diameter | 800 mm |
|---|---|
| Center height | 400 mm |
| Ø above transversing slide | 530 mm |
| Max workpiece weight | 9000 kg |
| Overhauled | no |
| Steady | yes |
Poland
| Length between centers | mm |
|---|---|
| Turning length | 1250 mm |
| Ø above the bed | mm |
| Diameter in the gap | mm |
| Max workpiece weight | kg |
| Turning speed | rpm |
| Overhauled | no |
| Tailstock | no |
| Max. turning diameter | 655 mm |
|---|---|
| Center height | mm |
| Ø above transversing slide | 390 mm |
| Faceplate diameter | mm |
| Spindle bore | 82 mm |
| Spindle motor power | 22 kW |
| Year of overhauling | |
| Steady | no |
| Max. turning diameter | 4500 mm |
|---|---|
| Center height | 2250 mm |
| Max workpiece weight | 15000 kg |
| Tailstock | yes |
| Type of chuck | 4 jaw |
| Turning length | 6000 mm |
|---|---|
| Diameter in the gap | 2500 mm |
| Overhauled | no |
| Steady | no |
Poland
1991
| Turning length | 5000 mm |
|---|---|
| Overhauled | yes |
| Steady | no |
| Max workpiece weight | 40000 kg |
|---|---|
| Tailstock | yes |
| Type of chuck | 4 jaw |
| Length between centers | 3000 mm |
|---|---|
| Turning length | 3000 mm |
| Ø above the bed | 930 mm |
| Diameter in the gap | 1200 mm |
| Max workpiece weight | kg |
| Turning speed | 250 rpm |
| Overhauled | no |
| Tailstock | no |
| Max. turning diameter | mm |
|---|---|
| Center height | mm |
| Ø above transversing slide | mm |
| Faceplate diameter | mm |
| Spindle bore | 320 mm |
| Spindle motor power | kW |
| Year of overhauling | |
| Steady | no |
Poland
1988
| Length between centers | 10000 mm |
|---|---|
| Turning length | 8000 mm |
| Ø above the bed | 4000 mm |
| Faceplate diameter | 2000 mm |
| Spindle bore | 105 mm |
| Spindle motor power | 75 kW |
| Year of overhauling | 1988 |
| Steady | yes |
| Max. turning diameter | 4000 mm |
|---|---|
| Center height | 2050 mm |
| Ø above transversing slide | 4000 mm |
| Max workpiece weight | 30000 kg |
| Turning speed | 98 rpm |
| Overhauled | no |
| Tailstock | yes |
| Type of chuck | 4 jaw |
Bulgaria
| Length between centers | 6300 mm |
|---|---|
| Overhauled | no |
| Steady | no |
| Ø above the bed | 1000 mm |
|---|---|
| Tailstock | no |
| Length between centers | 5000 mm |
|---|---|
| Center height | 350 mm |
| Spindle bore | 105 mm |
| Spindle motor power | 15 kW |
| Tailstock | no |
| Turning length | 5000 mm |
|---|---|
| Faceplate diameter | 350 mm |
| Turning speed | 1000 rpm |
| Overhauled | no |
| Steady | no |
| Length between centers | 4000 mm |
|---|---|
| Ø above the bed | 800 mm |
| Spindle bore | 92 mm |
| Overhauled | no |
| Steady | no |
| Turning length | 4000 mm |
|---|---|
| Diameter in the gap | 870 mm |
| Spindle motor power | 15 kW |
| Tailstock | no |
| Type of chuck | other |
Austria
2009
| Length between centers | 11000 mm |
|---|---|
| Turning length | mm |
| Ø above the bed | 1250 mm |
| Diameter in the gap | mm |
| Max workpiece weight | 12000 kg |
| Turning speed | 315 rpm |
| Overhauled | no |
| Tailstock | no |
| Max. turning diameter | mm |
|---|---|
| Center height | 720 mm |
| Ø above transversing slide | 1000 mm |
| Faceplate diameter | 1000 mm |
| Spindle bore | mm |
| Spindle motor power | 55 kW |
| Year of overhauling | |
| Steady | no |
Poland
1988
| Overhauled | no |
|---|---|
| Steady | no |
| Tailstock | no |
|---|
Austria
2009
| Length between centers | 11000 mm |
|---|---|
| Turning length | mm |
| Ø above the bed | 1250 mm |
| Diameter in the gap | mm |
| Max workpiece weight | 12000 kg |
| Turning speed | 315 rpm |
| Overhauled | no |
| Tailstock | no |
| Max. turning diameter | mm |
|---|---|
| Center height | 720 mm |
| Ø above transversing slide | 1000 mm |
| Faceplate diameter | 1000 mm |
| Spindle bore | mm |
| Spindle motor power | 55 kW |
| Year of overhauling | |
| Steady | no |
Poland
1982
| Length between centers | 3000 mm |
|---|---|
| Ø above transversing slide | 630 mm |
| Spindle bore | 120 mm |
| Spindle motor power | 27 kW |
| Tailstock | no |
| Ø above the bed | 1000 mm |
|---|---|
| Max workpiece weight | 12000 kg |
| Turning speed | 500 rpm |
| Overhauled | no |
| Steady | no |
| Length between centers | 4500 mm |
|---|---|
| Ø above transversing slide | 600 mm |
| Turning speed | 500 rpm |
| Tailstock | no |
| Ø above the bed | 825 mm |
|---|---|
| Spindle bore | 80 mm |
| Overhauled | no |
| Steady | no |
| Length between centers | 3300 mm |
|---|---|
| Ø above transversing slide | 640 mm |
| Faceplate diameter | 315 mm |
| Turning speed | 1400 rpm |
| Overhauled | no |
| Steady | no |
| Ø above the bed | 840 mm |
|---|---|
| Diameter in the gap | 640 mm |
| Spindle bore | 74 mm |
| Spindle motor power | 22 kW |
| Tailstock | no |
| Type of chuck | 3 jaw |
Germany
| Max. turning diameter | 1500 mm |
|---|---|
| Tailstock | no |
| Overhauled | no |
|---|---|
| Steady | no |
Poland
1995
| Turning length | 4000 mm |
|---|---|
| Ø above transversing slide | 1660 mm |
| Overhauled | no |
| Steady | no |
| Ø above the bed | 2000 mm |
|---|---|
| Spindle motor power | 80 kW |
| Tailstock | no |
| Turning length | 5000 mm |
|---|---|
| Ø above transversing slide | 600 mm |
| Overhauled | no |
| Steady | no |
| Ø above the bed | 1000 mm |
|---|---|
| Spindle bore | 85 mm |
| Tailstock | no |
Netherlands
| Length between centers | 4000 mm |
|---|---|
| Turning length | mm |
| Ø above the bed | 1340 mm |
| Diameter in the gap | mm |
| Max workpiece weight | kg |
| Turning speed | 280 rpm |
| Overhauled | no |
| Tailstock | no |
| Max. turning diameter | mm |
|---|---|
| Center height | mm |
| Ø above transversing slide | 750 mm |
| Faceplate diameter | 900 mm |
| Spindle bore | 104 mm |
| Spindle motor power | 45 kW |
| Year of overhauling | |
| Steady | no |
| Length between centers | 6300 mm |
|---|---|
| Ø above the bed | 1250 mm |
| Max workpiece weight | 1530 kg |
| Overhauled | no |
| Steady | no |
| Center height | 650 mm |
|---|---|
| Ø above transversing slide | 900 mm |
| Turning speed | 6200 rpm |
| Tailstock | no |
Netherlands
| Length between centers | 10000 mm |
|---|---|
| Ø above transversing slide | 1500 mm |
| Turning speed | 71 rpm |
| Overhauled | no |
| Steady | no |
| Ø above the bed | 2000 mm |
|---|---|
| Faceplate diameter | 1800 mm |
| Spindle motor power | 117 kW |
| Tailstock | no |
| Length between centers | 5000 mm |
|---|---|
| Turning length | 4000 mm |
| Ø above the bed | 820 mm |
| Diameter in the gap | 1100 mm |
| Spindle bore | 105 mm |
| Spindle motor power | 10 kW |
| Tailstock | no |
| Max. turning diameter | 1000 mm |
|---|---|
| Center height | 450 mm |
| Ø above transversing slide | 595 mm |
| Max workpiece weight | 7000 kg |
| Turning speed | 1010 rpm |
| Overhauled | no |
| Steady | no |
| Length between centers | 6000 mm |
|---|---|
| Turning length | 6000 mm |
| Ø above transversing slide | 540 mm |
| Overhauled | no |
| Steady | no |
| Max. turning diameter | 800 mm |
|---|---|
| Ø above the bed | 800 mm |
| Spindle bore | 95 mm |
| Tailstock | no |
тежкотоварен струг USSR 165
Velký soustruh USSR 165
USSR 165 kraftig drejebænk
USSR 165 Schwerdrehbank
τόρνος βαρέως τύπου USSR 165
USSR 165 heavy duty lathe
Torno de gran capacidad USSR 165
Tour grande capacité USSR 165
teški tokarski stroj USSR 165
USSR 165 nagy teherbírású eszterga
Tornio pesante USSR 165
sunkios tekinimo staklės USSR 165
USSR 165 zware draaibank
Tokarka ciężka USSR 165
torno resistente USSR 165
strung greu USSR 165
USSR 165 Тяжёлый токарный станок
strug za teške uslove rada USSR 165
USSR 165 kraftig svarv
Ağır Tip Torna USSR 165
Italy
Turkey
Spain
EN
- Languages
English (GB)