Contact us to receive an offer.
| Manufacturer | Turkey |
|---|---|
| Model | 110 CM MONO EXTRUDER |
| Year | 2025 |
| Location | Turkey
|
**110 CM MONO PE BLOWN FILM EXTRUSION LINE**
**Manufacturer:** Turkey
**Model:** 110 CM MONO EXTRUDER
**Year of Manufacture:** 2025
This extrusion line is designed for producing polyethylene blown film with a maximum film width of 110 cm. It features a mono screw extruder with a screw diameter of 65 mm and an output capacity of up to 80 kg per hour.
**Extruder Specifications:**
- Screw Diameter: 65 mm
- L/D Ratio: 3:1 (effective 3.4:1)
- Motor Power: 32 kW
- Gearbox: 3-stage
- Screw Type: Barrier
- Die Head: Rotating
- Movable Tower Height: 5 meters
- Corona Unit: Installed
**Die and Film Specifications:**
- Die Diameter: 200 mm
- Film Thickness Range: 30 to 500 microns
**Cooling and Winding:**
- Air Ring: Single lip design
- Cooling Fan Power: 3 kW
- Winder Type: Double winder with independent drive control
**Service and Maintenance (2025):**
- Barrel reconditioned
- Electrical panel revised
- Motor, gearbox, heater bands, air ring serviced
- Die polished
The machine is equipped with a control panel featuring multiple buttons and meters for operation management. The extrusion system includes rollers guiding the plastic film smoothly through the process. A flexible duct is connected to the upper part of the machine, likely for ventilation or exhaust purposes.
The equipment appears clean and well-maintained with no visible damage to the main components, though the control cabinet shows some signs of wear and dirt marks. The plastic film produced looks smooth and free of tears or defects.
This extrusion line is currently in production and represents a cost-effective solution for blown film manufacturing. It is available for inspection to evaluate its suitability for your production requirements.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
**110 CM MONO PE BLOWN FILM EXTRUSION LINE**
**Condition:** Running Condition
**Year of Manufacture:** 2025
**Working Hours:** Approximately 1500 hours after servicing
**Technical Condition:** Good
**State:** In Production
**Main Technical Specifications**
**Extruder:**
- Screw Diameter: 65 mm
- L/D Ratio: 3:1 (effective 3.4:1)
- Motor Power: 32 kW
- Output Capacity: Up to 80 kg/hour
- Gearbox: 3-stage
- Corona Unit: Installed
- Die Head: Rotating
- Movable Tower: 5-meter
- Screw Type: Barrier
**Die:**
- Die Diameter: 200 mm
- Thickness Range: 30 – 500 micron
**Cooling:**
- Air Ring: Single lip
- Fan Power: 3 kW
**Winder:**
- Max Film Width: 110 cm
- Type: Double Winder
- Drive Control: Independent
**Service Details (2025):**
- Barrel: Reconditioned
- Electrical Panel: Revised
- Motor: Serviced
- Gearbox: Serviced
- Heater Bands: Serviced
- Air Ring: Serviced
- Die: Polished
This machine is in stable working condition and available for inspection. It represents a cost-effective investment for your production needs.
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
When was this 110 CM MONO EXTRUDER last overhauled?
This 110 CM MONO EXTRUDER was fully overhauled in 2025.
Is this equipment currently in running condition?
This equipment is in running condition.
When was this 110 CM MONO PE EXTRUSION LINE last overhauled?
This 110 CM MONO PE EXTRUSION LINE was fully overhauled in 2025.
What additional components are included with this equipment?
This equipment includes a spare die.
Is this 110 CM MONO PE EXTRUSION LINE currently in running condition?
This 110 CM MONO PE EXTRUSION LINE is in running condition.
What is the width of this extrusion line?
This extrusion line has a 110 cm width.
What type of extrusion line is this?
This extrusion line is a mono PE extrusion line.
When was this extrusion line overhauled?
This extrusion line was fully overhauled in 2025.
Does this extrusion line include a spare die?
This extrusion line includes a spare die.
Is the extrusion line in running condition?
This extrusion line is in running condition.
What is the screw configuration of this extruder?
This extruder has a 110 cm single-screw configuration.
What type of extrusion line is this?
This extrusion line is a 110 cm mono PE extrusion line.
The following questions and answers are generated using artificial intelligence based on the product information available. They are provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Factory – small or medium company |
| Active since | 2026 |
| Offers online | 4 |
| Last activity | Oct. 15, 2026 |
**110 CM MONO PE BLOWN FILM EXTRUSION LINE**
**Condition:** Running Condition
**Year of Manufacture:** 2025
**Working Hours:** Approximately 1500 hours after servicing
**Technical Condition:** Good
**State:** In Production
**Main Technical Specifications**
**Extruder:**
- Screw Diameter: 65 mm
- L/D Ratio: 3:1 (effective 3.4:1)
- Motor Power: 32 kW
- Output Capacity: Up to 80 kg/hour
- Gearbox: 3-stage
- Corona Unit: Installed
- Die Head: Rotating
- Movable Tower: 5-meter
- Screw Type: Barrier
**Die:**
- Die Diameter: 200 mm
- Thickness Range: 30 – 500 micron
**Cooling:**
- Air Ring: Single lip
- Fan Power: 3 kW
**Winder:**
- Max Film Width: 110 cm
- Type: Double Winder
- Drive Control: Independent
**Service Details (2025):**
- Barrel: Reconditioned
- Electrical Panel: Revised
- Motor: Serviced
- Gearbox: Serviced
- Heater Bands: Serviced
- Air Ring: Serviced
- Die: Polished
This machine is in stable working condition and available for inspection. It represents a cost-effective investment for your production needs.
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
When was this 110 CM MONO EXTRUDER last overhauled?
This 110 CM MONO EXTRUDER was fully overhauled in 2025.
Is this equipment currently in running condition?
This equipment is in running condition.
When was this 110 CM MONO PE EXTRUSION LINE last overhauled?
This 110 CM MONO PE EXTRUSION LINE was fully overhauled in 2025.
What additional components are included with this equipment?
This equipment includes a spare die.
Is this 110 CM MONO PE EXTRUSION LINE currently in running condition?
This 110 CM MONO PE EXTRUSION LINE is in running condition.
What is the width of this extrusion line?
This extrusion line has a 110 cm width.
What type of extrusion line is this?
This extrusion line is a mono PE extrusion line.
When was this extrusion line overhauled?
This extrusion line was fully overhauled in 2025.
Does this extrusion line include a spare die?
This extrusion line includes a spare die.
Is the extrusion line in running condition?
This extrusion line is in running condition.
What is the screw configuration of this extruder?
This extruder has a 110 cm single-screw configuration.
What type of extrusion line is this?
This extrusion line is a 110 cm mono PE extrusion line.
The following questions and answers are generated using artificial intelligence based on the product information available. They are provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
**110 CM MONO PE BLOWN FILM EXTRUSION LINE**
**Manufacturer:** Turkey
**Model:** 110 CM MONO EXTRUDER
**Year of Manufacture:** 2025
This extrusion line is designed for producing polyethylene blown film with a maximum film width of 110 cm. It features a mono screw extruder with a screw diameter of 65 mm and an output capacity of up to 80 kg per hour.
**Extruder Specifications:**
- Screw Diameter: 65 mm
- L/D Ratio: 3:1 (effective 3.4:1)
- Motor Power: 32 kW
- Gearbox: 3-stage
- Screw Type: Barrier
- Die Head: Rotating
- Movable Tower Height: 5 meters
- Corona Unit: Installed
**Die and Film Specifications:**
- Die Diameter: 200 mm
- Film Thickness Range: 30 to 500 microns
**Cooling and Winding:**
- Air Ring: Single lip design
- Cooling Fan Power: 3 kW
- Winder Type: Double winder with independent drive control
**Service and Maintenance (2025):**
- Barrel reconditioned
- Electrical panel revised
- Motor, gearbox, heater bands, air ring serviced
- Die polished
The machine is equipped with a control panel featuring multiple buttons and meters for operation management. The extrusion system includes rollers guiding the plastic film smoothly through the process. A flexible duct is connected to the upper part of the machine, likely for ventilation or exhaust purposes.
The equipment appears clean and well-maintained with no visible damage to the main components, though the control cabinet shows some signs of wear and dirt marks. The plastic film produced looks smooth and free of tears or defects.
This extrusion line is currently in production and represents a cost-effective solution for blown film manufacturing. It is available for inspection to evaluate its suitability for your production requirements.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Factory – small or medium company |
| Active since | 2026 |
| Offers online | 4 |
| Last activity | Oct. 15, 2026 |
Едношнеков екструдер Turkey 110 CM MONO EXTRUDER
Jednošnekový extrudér Turkey 110 CM MONO EXTRUDER
Turkey 110 CM MONO EXTRUDER Enkeltsnegleekstruder
Turkey 110 CM MONO EXTRUDER Einschneckenextruder
Μονόκοχλιος εξωθητήρας Turkey 110 CM MONO EXTRUDER
110 CM MONO EXTRUDER FULLY OVERHAULED IN 2025 – SERVICED COST EFFECTIVE INVESTMENT - RUNNING CONDITION
Extrusora monohusillo Turkey 110 CM MONO EXTRUDER
Extrudeuse monovis Turkey 110 CM MONO EXTRUDER
Jednopužni ekstruder Turkey 110 CM MONO EXTRUDER
Turkey 110 CM MONO EXTRUDER Egycsigás extruder
Estrusore monovite Turkey 110 CM MONO EXTRUDER
Vienos sraigės ekstruderis Turkey 110 CM MONO EXTRUDER
Turkey 110 CM MONO EXTRUDER Enkelschroefextruder
Wytłaczarka jednoślimakowa Turkey 110 CM MONO EXTRUDER
Extrusora de rosca simples Turkey 110 CM MONO EXTRUDER
Extruder cu un singur șnec Turkey 110 CM MONO EXTRUDER
Turkey 110 CM MONO EXTRUDER Одношнековый экструдер
Jednošnekni ekstruder Turkey 110 CM MONO EXTRUDER
Turkey 110 CM MONO EXTRUDER Enkelskruvsextruder
Tek vidalı ekstrüder Turkey 110 CM MONO EXTRUDER
EN
- Languages
English (GB)