| Manufacturer | Trumpf |
|---|---|
| Model | Trumatic 5000 R 1300 FMC |
| Year | 2005 |
| Location | Germany
|
The Trumpf Trumatic 5000 R 1300 FMC is a robust CNC punching machine manufactured in 2005, designed for precise and efficient sheet metal processing. It features a powerful 22-ton punching capacity, accommodating metal sheets up to 2500 mm in length and 1250 mm in width, with a maximum steel thickness of 8 mm. The machine allows repositioning to extend the working length up to 5000 mm while maintaining the metal width of 1250 mm. It supports a maximum punching diameter of 76 mm.
Equipped with a stable C-frame, the machine ensures easy access and high precision machining through a coordinate guide system. The repositioning unit includes a programmable stripper, enhancing versatility. Tool management is facilitated by a linear magazine housing tools and clamps, including three clamps for secure sheet handling. The programmable presser foot offers selectable press force, complemented by sheet collision detection and drives powered by maintenance-free 3-phase servo motors. Ball tables and a part flap measuring 500 x 500 mm assist in material handling.
The punching head is hydraulic with a single tool adapter capable of 360° tool rotation and automatic tool length compensation. Additional features include spray tool lubrication, a chip vacuum system, and forming capabilities.
Control is managed via a Siemens Sinumerik 840 D controller with a 10.4" TFT color screen, offering diagnostic functions, shop floor programming, a floppy drive, and RJ45 network connectivity. Safety features include CE marking, quick hydraulic switch-off, and light guards.
Additional functionalities encompass MultiTool, MultiShear, MultiBend, Tapping, Marking/Rapid Beading, Roll Technology, adaptive stroke calibration, individually opening clamps, repositioning cylinders, programmable chute sensors, air cushion installation, automatic shutdown, chip conveyor with switch point, low scratch effect machining, remote control interface, storage interface, and extra safety devices.
Automation options include the SheetMaster 1305 with peeler cup, vacuum sensor, central lubrication, sheet thickness sensor, and TASC 100 control; GripMaster with sheet skeleton gripper and sensor, scissor table, and tiltable skeleton pallet; TrumaSort R4 for parallel loading/unloading; and TrumaTool 40 for parallel setup operations.
The machine is observed to be clean and well-maintained, featuring a large CNC punching area with protective fencing, a sheet metal loading table with three round cutouts, and a centrally mounted tool head for punching operations.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Trumpf Trumatic 5000R - 1300 FMC
Year: 2005
Machine hours: about 79.000 h
Working area: 2570 x 1300 mm
Standard equipment
- Stable C-frame for easy access
- Coordinate guide for high precision machining
- Repositioning unit with programmable stripper
- Linear magazine for tools and clamps, 3 clamps
- Programmable presser foot with selectable press force
- sheet collision detection
- Drives with maintenance-free 3-phase servo motors
- Ball tables
- Part flap 500 x 500 mm
Punching head
- Hydraulic punching head
- Single tool adapter
- 360° rotation of all tools
- Automatic tool length compensation
- Programmable presser foot
- Spray tool lubrication
- Chip vacuum system
- Forming
Control
- Controller based on Siemens Sinumerik 840 D
- TFT color screen 10,4"
- Diagnosis functions
- Shop floor programming
- Floppy drive
- RJ45 network connection
Safety
- CE-marking
- Quick switch-off hydraulic
- Light guards
Additional equipment
- Function MultiTool
- Function MultiShear
- Function MultiBend
- Function Tapping
- Function Marking / Rapid beading
- Function Roll technology
- Adaptive stroke calibration
- Clamps opening individually
- Repositioning cylinders
- Sensor for programmable chute
- Installation on air cushion
- Automatic shutdown
- Chip conveyor combination with switch point
- Programmable switch point by M-function
- Machining with low scratch effect
- RCI Remote Control Interface
- Storage interface
- Additional safety device
Automation
SheetMaster 1305:
- Peeler cup
- Vacuum sensor
- Central lubrification
- Sheet thickness sensor for double sheet check
- Control TASC 100
Options:
- Safety interface
- Longer guide track
- Peeling device
- Suction plate module
- Loading table (3x1.5m)
GripMaster:
- Sheet skeleton gripper with sensor
- Scissor table 400 mm
- Sheet skeleton pallet tiltable 2500 x 1250 mm
TrumaSort R4:
- without containers
- Loading and unloading parallel to production
TrumaTool 40:
- Setup parallel to production TrumaTool
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Machinery dealer |
| Active since | 2019 |
| Offers online | 32 |
| Last activity | Oct. 21, 2026 |
TBM Maschinenhandel GmbH is a leading player in the machinery trading sector based in Germany. With a strong commitment to quality and customer satisfaction, TBM specializes in the sale and distribution of high-performance industrial machinery. Their extensive portfolio includes a wide range of equipment tailored to meet the diverse needs of various industries, ensuring that clients have access to the latest technology and innovations. Founded on the principles of reliability and expertise, TBM Maschinenhandel GmbH prides itself on its knowledgeable team, which is dedicated to providing exceptional service and support. They understand the unique challenges faced by businesses in today’s competitive landscape and strive to offer solutions that enhance productivity and efficiency. Whether you are looking for new machinery or need assistance with maintenance and repairs, TBM is your trusted partner. In addition to their impressive product offerings, TBM places a strong emphasis on building long-term relationships with clients. Their customer-centric approach ensures that every interaction is focused on understanding and fulfilling the specific needs of each business. By choosing TBM Maschinenhandel GmbH, clients can expect not only top-quality machinery but also a partnership that fosters growth and success in their operations.
Trumpf Trumatic 5000R - 1300 FMC
Year: 2005
Machine hours: about 79.000 h
Working area: 2570 x 1300 mm
Standard equipment
- Stable C-frame for easy access
- Coordinate guide for high precision machining
- Repositioning unit with programmable stripper
- Linear magazine for tools and clamps, 3 clamps
- Programmable presser foot with selectable press force
- sheet collision detection
- Drives with maintenance-free 3-phase servo motors
- Ball tables
- Part flap 500 x 500 mm
Punching head
- Hydraulic punching head
- Single tool adapter
- 360° rotation of all tools
- Automatic tool length compensation
- Programmable presser foot
- Spray tool lubrication
- Chip vacuum system
- Forming
Control
- Controller based on Siemens Sinumerik 840 D
- TFT color screen 10,4"
- Diagnosis functions
- Shop floor programming
- Floppy drive
- RJ45 network connection
Safety
- CE-marking
- Quick switch-off hydraulic
- Light guards
Additional equipment
- Function MultiTool
- Function MultiShear
- Function MultiBend
- Function Tapping
- Function Marking / Rapid beading
- Function Roll technology
- Adaptive stroke calibration
- Clamps opening individually
- Repositioning cylinders
- Sensor for programmable chute
- Installation on air cushion
- Automatic shutdown
- Chip conveyor combination with switch point
- Programmable switch point by M-function
- Machining with low scratch effect
- RCI Remote Control Interface
- Storage interface
- Additional safety device
Automation
SheetMaster 1305:
- Peeler cup
- Vacuum sensor
- Central lubrification
- Sheet thickness sensor for double sheet check
- Control TASC 100
Options:
- Safety interface
- Longer guide track
- Peeling device
- Suction plate module
- Loading table (3x1.5m)
GripMaster:
- Sheet skeleton gripper with sensor
- Scissor table 400 mm
- Sheet skeleton pallet tiltable 2500 x 1250 mm
TrumaSort R4:
- without containers
- Loading and unloading parallel to production
TrumaTool 40:
- Setup parallel to production TrumaTool
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
The Trumpf Trumatic 5000 R 1300 FMC is a robust CNC punching machine manufactured in 2005, designed for precise and efficient sheet metal processing. It features a powerful 22-ton punching capacity, accommodating metal sheets up to 2500 mm in length and 1250 mm in width, with a maximum steel thickness of 8 mm. The machine allows repositioning to extend the working length up to 5000 mm while maintaining the metal width of 1250 mm. It supports a maximum punching diameter of 76 mm.
Equipped with a stable C-frame, the machine ensures easy access and high precision machining through a coordinate guide system. The repositioning unit includes a programmable stripper, enhancing versatility. Tool management is facilitated by a linear magazine housing tools and clamps, including three clamps for secure sheet handling. The programmable presser foot offers selectable press force, complemented by sheet collision detection and drives powered by maintenance-free 3-phase servo motors. Ball tables and a part flap measuring 500 x 500 mm assist in material handling.
The punching head is hydraulic with a single tool adapter capable of 360° tool rotation and automatic tool length compensation. Additional features include spray tool lubrication, a chip vacuum system, and forming capabilities.
Control is managed via a Siemens Sinumerik 840 D controller with a 10.4" TFT color screen, offering diagnostic functions, shop floor programming, a floppy drive, and RJ45 network connectivity. Safety features include CE marking, quick hydraulic switch-off, and light guards.
Additional functionalities encompass MultiTool, MultiShear, MultiBend, Tapping, Marking/Rapid Beading, Roll Technology, adaptive stroke calibration, individually opening clamps, repositioning cylinders, programmable chute sensors, air cushion installation, automatic shutdown, chip conveyor with switch point, low scratch effect machining, remote control interface, storage interface, and extra safety devices.
Automation options include the SheetMaster 1305 with peeler cup, vacuum sensor, central lubrication, sheet thickness sensor, and TASC 100 control; GripMaster with sheet skeleton gripper and sensor, scissor table, and tiltable skeleton pallet; TrumaSort R4 for parallel loading/unloading; and TrumaTool 40 for parallel setup operations.
The machine is observed to be clean and well-maintained, featuring a large CNC punching area with protective fencing, a sheet metal loading table with three round cutouts, and a centrally mounted tool head for punching operations.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2019 |
| Offers online | 32 |
| Last activity | Oct. 21, 2026 |
TBM Maschinenhandel GmbH is a leading player in the machinery trading sector based in Germany. With a strong commitment to quality and customer satisfaction, TBM specializes in the sale and distribution of high-performance industrial machinery. Their extensive portfolio includes a wide range of equipment tailored to meet the diverse needs of various industries, ensuring that clients have access to the latest technology and innovations. Founded on the principles of reliability and expertise, TBM Maschinenhandel GmbH prides itself on its knowledgeable team, which is dedicated to providing exceptional service and support. They understand the unique challenges faced by businesses in today’s competitive landscape and strive to offer solutions that enhance productivity and efficiency. Whether you are looking for new machinery or need assistance with maintenance and repairs, TBM is your trusted partner. In addition to their impressive product offerings, TBM places a strong emphasis on building long-term relationships with clients. Their customer-centric approach ensures that every interaction is focused on understanding and fulfilling the specific needs of each business. By choosing TBM Maschinenhandel GmbH, clients can expect not only top-quality machinery but also a partnership that fosters growth and success in their operations.
CNC машина за щанцоване Trumpf Trumatic 5000 R 1300 FMC
Děrovací stroj CNC Trumpf Trumatic 5000 R 1300 FMC
Trumpf Trumatic 5000 R 1300 FMC CNC stansemaskine
Trumpf Trumatic 5000 R 1300 FMC CNC Stanzmaschine
CNC μηχάνημα διάτρησης Trumpf Trumatic 5000 R 1300 FMC
Trumpf Trumatic 5000R - 1300 FMC
Punzonadora CNC Trumpf Trumatic 5000 R 1300 FMC
Poinçonneuse à cnc Trumpf Trumatic 5000 R 1300 FMC
CNC stroj za bušenje Trumpf Trumatic 5000 R 1300 FMC
Trumpf Trumatic 5000 R 1300 FMC CNC lyukasztógép
Punzonatrice CNC Trumpf Trumatic 5000 R 1300 FMC
CNC perforavimo mašina Trumpf Trumatic 5000 R 1300 FMC
Trumpf Trumatic 5000 R 1300 FMC CNC-ponsmachine
Wykrawarka CNC Trumpf Trumatic 5000 R 1300 FMC
Máquina de perfuração CNC Trumpf Trumatic 5000 R 1300 FMC
Mașină de perforat CNC Trumpf Trumatic 5000 R 1300 FMC
Trumpf Trumatic 5000 R 1300 FMC Перфоратор с ЧПУ
CNC mašina za probijanje Trumpf Trumatic 5000 R 1300 FMC
Trumpf Trumatic 5000 R 1300 FMC CNC stansmaskin
CNC punch makinesi Trumpf Trumatic 5000 R 1300 FMC
EN
- Languages
English (GB)