| Manufacturer | TRUMPF |
|---|---|
| Model | TRUMATIC 120R |
| Year | 1991 |
| Location | Poland
|
The TRUMPF TRUMATIC 120R is a CNC punching machine designed for precise metal fabrication tasks. Manufactured in 1991, this machine offers a punching force of 15 tons (150 kN), suitable for working with sheet metal up to 4 mm in thickness. It features a working range of 1000 x 1000 mm without repositioning and can extend to 1000 x 2000 mm with one repositioning, accommodating metal sheets up to 2000 mm in length and 1000 mm in width.
Equipped with nine tool stations, the machine allows automatic tool changes with an approximate change time of 6 seconds, enhancing productivity. The TRUMATIC 120R operates at a maximum stroke rate of 340 strokes per minute, with an X/Y axis speed reaching up to 40 m/min on a single axis and 56 m/min on two axes simultaneously. The rotation speed of the tool head is 360 degrees per second, enabling full rotation for complex punching operations.
The control system is the TRUMAGRAPH CC 200, which provides high accuracy with the smallest programmable movement of 0.01 mm or 0.01 degrees. Position deviation is maintained within ±0.1 mm, and average positioning range is ±0.03 mm, ensuring precise and consistent results.
The machine has a footprint of 3800 mm in length, 4600 mm in width, and 1820 mm in height, weighing approximately 4300 kg. It requires a power supply of 15 kVA at 50 Hz and compressed air at 0.5 Nm³/h with 6 bar pressure.
Visually, the machine is labeled 'TRUMATIC 120 ROTATION' and features a blue mechanical arm with multiple tool holders beneath the main housing. The surface shows minor signs of use but remains generally clean. A metal sheet is placed on the worktable under the tool area, indicating readiness for operation.
Complete documentation including machine history is provided. Note that the machine has been idle for two years and was previously running at half capacity.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Trumpf Trumatic 120 Rotation with tools. The machine is fully operational.
You could say it was running at half capacity.
It has been idle for two years.
Technical specifications:
Punching force: 15 tons (150 kN)
Maximum sheet thickness: 4 mm
Maximum punching diameter: 38 mm
Working range without repositioning: 1000 x 1000 mm
Working range with one repositioning: 1000 x 2000 mm
Number of tools: 9
X/Y axis speed: maximum speed of one axis: 40 m/min, two axes simultaneously: 56 m/min
Rotation speed: 360 degrees/s, full rotation
Maximum number of strokes: 340 strokes per minute.
Control system: TRUMAGRAPH CC 200
Accuracy: smallest programmable movement 0.01 mm or 0.01 degree, position deviation Pa: +-0.1 mm, average positioning range Ps: +-0.03 mm
Automatic tool change: number of tool stations: 9, tool change time: approx. 6 seconds
Machine dimensions: length x width x height 3800 x 4600 x 1820 mm
Weight: 4300 kg
Complete documentation with machine history
Power requirement: 15 kVA / 50 Hz
Compressed air: 0.5 Nm³/h, 6 bar
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Private person / Without company |
| Active since | 2026 |
| Offers online | 1 |
| Last activity | Aug. 11, 2026 |
Trumpf Trumatic 120 Rotation with tools. The machine is fully operational.
You could say it was running at half capacity.
It has been idle for two years.
Technical specifications:
Punching force: 15 tons (150 kN)
Maximum sheet thickness: 4 mm
Maximum punching diameter: 38 mm
Working range without repositioning: 1000 x 1000 mm
Working range with one repositioning: 1000 x 2000 mm
Number of tools: 9
X/Y axis speed: maximum speed of one axis: 40 m/min, two axes simultaneously: 56 m/min
Rotation speed: 360 degrees/s, full rotation
Maximum number of strokes: 340 strokes per minute.
Control system: TRUMAGRAPH CC 200
Accuracy: smallest programmable movement 0.01 mm or 0.01 degree, position deviation Pa: +-0.1 mm, average positioning range Ps: +-0.03 mm
Automatic tool change: number of tool stations: 9, tool change time: approx. 6 seconds
Machine dimensions: length x width x height 3800 x 4600 x 1820 mm
Weight: 4300 kg
Complete documentation with machine history
Power requirement: 15 kVA / 50 Hz
Compressed air: 0.5 Nm³/h, 6 bar
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
The TRUMPF TRUMATIC 120R is a CNC punching machine designed for precise metal fabrication tasks. Manufactured in 1991, this machine offers a punching force of 15 tons (150 kN), suitable for working with sheet metal up to 4 mm in thickness. It features a working range of 1000 x 1000 mm without repositioning and can extend to 1000 x 2000 mm with one repositioning, accommodating metal sheets up to 2000 mm in length and 1000 mm in width.
Equipped with nine tool stations, the machine allows automatic tool changes with an approximate change time of 6 seconds, enhancing productivity. The TRUMATIC 120R operates at a maximum stroke rate of 340 strokes per minute, with an X/Y axis speed reaching up to 40 m/min on a single axis and 56 m/min on two axes simultaneously. The rotation speed of the tool head is 360 degrees per second, enabling full rotation for complex punching operations.
The control system is the TRUMAGRAPH CC 200, which provides high accuracy with the smallest programmable movement of 0.01 mm or 0.01 degrees. Position deviation is maintained within ±0.1 mm, and average positioning range is ±0.03 mm, ensuring precise and consistent results.
The machine has a footprint of 3800 mm in length, 4600 mm in width, and 1820 mm in height, weighing approximately 4300 kg. It requires a power supply of 15 kVA at 50 Hz and compressed air at 0.5 Nm³/h with 6 bar pressure.
Visually, the machine is labeled 'TRUMATIC 120 ROTATION' and features a blue mechanical arm with multiple tool holders beneath the main housing. The surface shows minor signs of use but remains generally clean. A metal sheet is placed on the worktable under the tool area, indicating readiness for operation.
Complete documentation including machine history is provided. Note that the machine has been idle for two years and was previously running at half capacity.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Private person / Without company |
| Active since | 2026 |
| Offers online | 1 |
| Last activity | Aug. 11, 2026 |
CNC машина за щанцоване TRUMPF TRUMATIC 120R
Děrovací stroj CNC TRUMPF TRUMATIC 120R
TRUMPF TRUMATIC 120R CNC stansemaskine
TRUMPF TRUMATIC 120R CNC Stanzmaschine
CNC μηχάνημα διάτρησης TRUMPF TRUMATIC 120R
TRUMPF TRUMATIC 120R CNC punching machine
Punzonadora CNC TRUMPF TRUMATIC 120R
Poinçonneuse à cnc TRUMPF TRUMATIC 120R
CNC stroj za bušenje TRUMPF TRUMATIC 120R
TRUMPF TRUMATIC 120R CNC lyukasztógép
Punzonatrice CNC TRUMPF TRUMATIC 120R
CNC perforavimo mašina TRUMPF TRUMATIC 120R
TRUMPF TRUMATIC 120R CNC-ponsmachine
Wykrawarka CNC TRUMPF TRUMATIC 120R
Máquina de perfuração CNC TRUMPF TRUMATIC 120R
Mașină de perforat CNC TRUMPF TRUMATIC 120R
TRUMPF TRUMATIC 120R Перфоратор с ЧПУ
CNC mašina za probijanje TRUMPF TRUMATIC 120R
TRUMPF TRUMATIC 120R CNC stansmaskin
CNC punch makinesi TRUMPF TRUMATIC 120R
EN
- Languages
English (GB)