Contact us to receive an offer.
| Manufacturer | TRUMPF |
|---|---|
| Model | TruLaser 3530 |
| Year | 2008 |
| Location | Poland
|
This TRUMPF TruLaser 3530 is a large industrial laser cutting machine manufactured in 2008. It has overall dimensions of 9300 mm in length, 4600 mm in width, and 2700 mm in height, with a total weight of 11,500 kg. The machine is powered by a 3200 W laser source and features working travel distances of 3000 mm along the X-axis, 1500 mm along the Y-axis, and 115 mm along the Z-axis.
The machine is equipped with a Siemens Sinumerik 840 D control system, which includes a control panel with a screen, buttons, knobs, and an emergency stop button. Documentation is attached above the control panel for operator reference. The cutting bed is visible through protective glass doors and includes metal spikes to support the material during cutting. Protective accordion covers are present on the machine rails, and warning labels are affixed to the machine beam for safety.
This laser cutting system supports a maximum sheet thickness of 20 mm, with maximum sheet weights up to 710 kg. It can handle stainless steel sheets up to 12 mm thick and aluminum sheets up to 8 mm thick. The laser type is TLF 3200 Turbo. The machine includes several advanced features such as high-pressure Hi-Las cutting, Las Plus, SprintAx Plus, a quick-change cutting head device with 5" and 7.5" lenses, automatic detection of the sheet metal outer edge, adjustable laser diode, programmable cutting gas selection and pressure settings, Contour Laser, micro-welding, AutoLas Plus, automatic pallet changer, workplace lighting, small parts/waste conveyor, multi-chamber suction, compact vacuum cleaner, automatic shutdown, and safety devices.
The machine is painted in white and blue and shows signs of industrial use with some dirt, dust, metal debris, and wear visible on surfaces and components. It is situated in a workshop environment with adjacent blue storage or electrical cabinets and yellow safety barriers nearby. The cutting bed and surrounding floor have accumulated dust and metal scraps, which is typical for used equipment in an industrial setting.
Connectivity options include an RJ45 network connection and a 3.5-inch floppy disk drive. Full documentation is provided with the machine. Compressed air consumption is 33 Nm3/h, and the connection power requirement is 72 kVA. As of February 28, 2025, the machine has an operating time of 57,113 hours, with 29,470 hours of laser beam operation recorded.
Overall, this TRUMPF TruLaser 3530 is a comprehensive laser cutting solution with extensive features and accessories suitable for various metal cutting applications. The machine appears used but complete, with visible signs of regular industrial operation.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Working width X 3000 mm
Working width Y 1500 mm
Working width Z 115 mm
Speed. Max. X 60 m/min
Speed. Max. Y 60 m/min
Speed. Max. X Y 84 m/min
Siemens Sinumerik 840 D control system
Max. Thickness of sheet metal 20 mm
Max. sheet weight 710 kg
Max. Gr. stainless sheet 12 mm
Max. Gr. of Alu sheet. 8 mm
Laser type TLF 3200 Turbo
Color white/blue
Compressed air connection 33 Nm3/h
Connection power 72 kVA
Operating time of the machine 57113 hours as of 28.02.2025
Laser beam operating time 29470 hrs as of 28.02.2025
Good condition, machine in 100% working order, service contract
Equipment:
- High-pressure cutting Hi-Las
- Las Plus
- One laser cutting head, each with a 5" and 7.5" lens.
- SprintAx Plus
- Quick-change cutting head device
- Automatic detection of the outer edge of the sheet metal
- Adjustable laser diode
- Programmable cutting gas selection/pressure setting
- Contour Laser
- Micro-welding
- AutoLas Plus
- automatic pallet changer
- workplace lighting
- Small parts/waste conveyor
- Multi-chamber suction
- Compact vacuum cleaner
- Automatic shutdown
- Safety devices
- Top 100 lite
- RJ 45 network connection
- 3.5 inch floppy disk drive
- Full documentation
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Factory – small or medium company |
| Active since | 2025 |
| Offers online | 1 |
| Last activity | Oct. 20, 2026 |
Working width X 3000 mm
Working width Y 1500 mm
Working width Z 115 mm
Speed. Max. X 60 m/min
Speed. Max. Y 60 m/min
Speed. Max. X Y 84 m/min
Siemens Sinumerik 840 D control system
Max. Thickness of sheet metal 20 mm
Max. sheet weight 710 kg
Max. Gr. stainless sheet 12 mm
Max. Gr. of Alu sheet. 8 mm
Laser type TLF 3200 Turbo
Color white/blue
Compressed air connection 33 Nm3/h
Connection power 72 kVA
Operating time of the machine 57113 hours as of 28.02.2025
Laser beam operating time 29470 hrs as of 28.02.2025
Good condition, machine in 100% working order, service contract
Equipment:
- High-pressure cutting Hi-Las
- Las Plus
- One laser cutting head, each with a 5" and 7.5" lens.
- SprintAx Plus
- Quick-change cutting head device
- Automatic detection of the outer edge of the sheet metal
- Adjustable laser diode
- Programmable cutting gas selection/pressure setting
- Contour Laser
- Micro-welding
- AutoLas Plus
- automatic pallet changer
- workplace lighting
- Small parts/waste conveyor
- Multi-chamber suction
- Compact vacuum cleaner
- Automatic shutdown
- Safety devices
- Top 100 lite
- RJ 45 network connection
- 3.5 inch floppy disk drive
- Full documentation
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
This TRUMPF TruLaser 3530 is a large industrial laser cutting machine manufactured in 2008. It has overall dimensions of 9300 mm in length, 4600 mm in width, and 2700 mm in height, with a total weight of 11,500 kg. The machine is powered by a 3200 W laser source and features working travel distances of 3000 mm along the X-axis, 1500 mm along the Y-axis, and 115 mm along the Z-axis.
The machine is equipped with a Siemens Sinumerik 840 D control system, which includes a control panel with a screen, buttons, knobs, and an emergency stop button. Documentation is attached above the control panel for operator reference. The cutting bed is visible through protective glass doors and includes metal spikes to support the material during cutting. Protective accordion covers are present on the machine rails, and warning labels are affixed to the machine beam for safety.
This laser cutting system supports a maximum sheet thickness of 20 mm, with maximum sheet weights up to 710 kg. It can handle stainless steel sheets up to 12 mm thick and aluminum sheets up to 8 mm thick. The laser type is TLF 3200 Turbo. The machine includes several advanced features such as high-pressure Hi-Las cutting, Las Plus, SprintAx Plus, a quick-change cutting head device with 5" and 7.5" lenses, automatic detection of the sheet metal outer edge, adjustable laser diode, programmable cutting gas selection and pressure settings, Contour Laser, micro-welding, AutoLas Plus, automatic pallet changer, workplace lighting, small parts/waste conveyor, multi-chamber suction, compact vacuum cleaner, automatic shutdown, and safety devices.
The machine is painted in white and blue and shows signs of industrial use with some dirt, dust, metal debris, and wear visible on surfaces and components. It is situated in a workshop environment with adjacent blue storage or electrical cabinets and yellow safety barriers nearby. The cutting bed and surrounding floor have accumulated dust and metal scraps, which is typical for used equipment in an industrial setting.
Connectivity options include an RJ45 network connection and a 3.5-inch floppy disk drive. Full documentation is provided with the machine. Compressed air consumption is 33 Nm3/h, and the connection power requirement is 72 kVA. As of February 28, 2025, the machine has an operating time of 57,113 hours, with 29,470 hours of laser beam operation recorded.
Overall, this TRUMPF TruLaser 3530 is a comprehensive laser cutting solution with extensive features and accessories suitable for various metal cutting applications. The machine appears used but complete, with visible signs of regular industrial operation.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Factory – small or medium company |
| Active since | 2025 |
| Offers online | 1 |
| Last activity | Oct. 20, 2026 |
машина за лазерно рязане TRUMPF TruLaser 3530
Řezačka - laserový řezací stroj TRUMPF TruLaser 3530
TRUMPF TruLaser 3530 laserskæremaskine
TRUMPF TruLaser 3530 Laserschneidmaschine
μηχανή κοπής λέιζερ TRUMPF TruLaser 3530
TRUMPF TruLaser 3530 laser cutting machine
Máquina de corte por láser TRUMPF TruLaser 3530
Machine de découpe laser TRUMPF TruLaser 3530
stroj za lasersko rezanje TRUMPF TruLaser 3530
TRUMPF TruLaser 3530 lézervágó gép
Impianto taglio laser TRUMPF TruLaser 3530
lazerinio pjovimo mašina TRUMPF TruLaser 3530
TRUMPF TruLaser 3530 Laser snij machine
Laser TRUMPF TruLaser 3530
máquina de corte a laser TRUMPF TruLaser 3530
mașină de tăiat cu laser TRUMPF TruLaser 3530
TRUMPF TruLaser 3530 Станок для лазерной резки
mašina za lasersko sečenje TRUMPF TruLaser 3530
TRUMPF TruLaser 3530 laserskärmaskin
Lazer kesim makinesi TRUMPF TruLaser 3530
EN
- Languages
English (GB)