Contact us to receive an offer.
| Manufacturer | TRUMPF |
|---|---|
| Model | TruLaser 3030 |
| Year | 2008 |
| Location | Belgium
|
TRUMPF TruLaser 3030 CNC CO₂ laser cutting machine, manufactured in 2008. The listed laser power is 4,000 W, with a Z-axis travel of 115 mm and a maximum workpiece weight of 900 kg. The existing specification states a working area of 3,000 × 1,500 mm and identifies the laser source as a TruFlow 4000. Listed maximum cutting thicknesses are 20 mm for mild steel, 15 mm for stainless steel, and 10 mm for aluminium. These specifications are provided as listing information and should be verified where critical to a purchase.
The machine is an enclosed blue-and-white design with front access doors and viewing windows. It has a cutting head carriage, gantry, cable carriers, and a cutting bed with serrated support slats. A control console is present. Its display has a prominent diagonal crack, and the panel and nearby surfaces appear dusty and worn. The exterior panels and interior gantry show visible dirt, scuffs, discoloration, and general surface wear. The cutting table is shown both empty and with cut sheet-metal parts on it.
The TruFlow 4000 source housing is identified on the machine. A separate vented unit is positioned beside the enclosure; its inclusion with the machine is not confirmed. A red rotary disconnect switch, attached cables, and electrical hazard warning labels are also present on the cabinets. The CNC control model is not confirmed. No claim is made about operating condition, testing, or service history.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
machines
TRUMPF CNC Laser Cutting Machine
Type: TruLaser 3030
Year: 2008
Laser source: TruFlow 4000
Laser type: CO₂
Laser power: 4000W
Working area (X/Y): 3000 × 1500mm
Z-axis travel: 115mm
Maximum workpiece weight: 900kg
Maximum cutting thickness – mild steel: 20mm
Maximum cutting thickness – stainless steel: 15mm
Maximum cutting thickness – aluminium: 10mm
CNC control: Siemens SINUMERIK 840D (to be confirmed)
Technology: 2D laser cutting
Please Note: The above information has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy cannot be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. Specific tooling and accessories must be confirmed before purchasing, since machine configurations may vary and availability cannot be guaranteed. We advise you to check any vital details!
Type: TruLaser 3030
Year: 2008
Laser Source: TruFlow 4000
Laser Type: CO₂
Laser Power: 4000W
Working Area X Y: 3000 × 1500mm
Z Axis Travel: 115mm
Maximum Workpiece Weight: 900kg
Technology: 2D laser cutting
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Machinery dealer |
| Active since | 2019 |
| Offers online | 41 |
| Last activity | Oct. 30, 2026 |
machines
TRUMPF CNC Laser Cutting Machine
Type: TruLaser 3030
Year: 2008
Laser source: TruFlow 4000
Laser type: CO₂
Laser power: 4000W
Working area (X/Y): 3000 × 1500mm
Z-axis travel: 115mm
Maximum workpiece weight: 900kg
Maximum cutting thickness – mild steel: 20mm
Maximum cutting thickness – stainless steel: 15mm
Maximum cutting thickness – aluminium: 10mm
CNC control: Siemens SINUMERIK 840D (to be confirmed)
Technology: 2D laser cutting
Please Note: The above information has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy cannot be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. Specific tooling and accessories must be confirmed before purchasing, since machine configurations may vary and availability cannot be guaranteed. We advise you to check any vital details!
Type: TruLaser 3030
Year: 2008
Laser Source: TruFlow 4000
Laser Type: CO₂
Laser Power: 4000W
Working Area X Y: 3000 × 1500mm
Z Axis Travel: 115mm
Maximum Workpiece Weight: 900kg
Technology: 2D laser cutting
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
TRUMPF TruLaser 3030 CNC CO₂ laser cutting machine, manufactured in 2008. The listed laser power is 4,000 W, with a Z-axis travel of 115 mm and a maximum workpiece weight of 900 kg. The existing specification states a working area of 3,000 × 1,500 mm and identifies the laser source as a TruFlow 4000. Listed maximum cutting thicknesses are 20 mm for mild steel, 15 mm for stainless steel, and 10 mm for aluminium. These specifications are provided as listing information and should be verified where critical to a purchase.
The machine is an enclosed blue-and-white design with front access doors and viewing windows. It has a cutting head carriage, gantry, cable carriers, and a cutting bed with serrated support slats. A control console is present. Its display has a prominent diagonal crack, and the panel and nearby surfaces appear dusty and worn. The exterior panels and interior gantry show visible dirt, scuffs, discoloration, and general surface wear. The cutting table is shown both empty and with cut sheet-metal parts on it.
The TruFlow 4000 source housing is identified on the machine. A separate vented unit is positioned beside the enclosure; its inclusion with the machine is not confirmed. A red rotary disconnect switch, attached cables, and electrical hazard warning labels are also present on the cabinets. The CNC control model is not confirmed. No claim is made about operating condition, testing, or service history.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2019 |
| Offers online | 41 |
| Last activity | Oct. 30, 2026 |
Машина за лазерно рязане TRUMPF TruLaser 3030
Laserový řezací stroj TRUMPF TruLaser 3030
TRUMPF TruLaser 3030 Laserskæremaskine
TRUMPF TruLaser 3030 Laserschneidmaschine
Μηχανή κοπής λέιζερ TRUMPF TruLaser 3030
TRUMPF TruLaser 3030 Laser cutting machine
Máquina de corte láser TRUMPF TruLaser 3030
Machine de découpe laser TRUMPF TruLaser 3030
Stroj za lasersko rezanje TRUMPF TruLaser 3030
TRUMPF TruLaser 3030 Lézervágó gép
Macchina taglio laser TRUMPF TruLaser 3030
TRUMPF TruLaser 3030 Lazerinio pjovimo staklės
TRUMPF TruLaser 3030 Lasersnijmachine
Maszyna do cięcia laserowego TRUMPF TruLaser 3030
Máquina de corte a laser TRUMPF TruLaser 3030
Mașină de tăiere cu laser TRUMPF TruLaser 3030
TRUMPF TruLaser 3030 Станок лазерной резки
Mašina za lasersko rezanje TRUMPF TruLaser 3030
TRUMPF TruLaser 3030 Laserskärmaskin
Lazer kesim makinesi TRUMPF TruLaser 3030
EN
- Languages
English (GB)