Contact us to receive an offer.
| Category | Grinding - Cylindrical external / internal grinding machines |
| Max. grinding length | 200 mm |
| Grinding diameter | 120 mm |
| CNC | Yes |
| Type of CNC | |
| Max. height from spindle to table | 200 mm |
| Max. wheel speed | 1300 rpm |
| Spindle motor power | 4 kW |
| Weight | 3000 kg |
| worked hours | |
| hours under power | |
| state | good |
| At local norms | --------- |
| status | visible |
| Last availability date | 09/10/2026 |
| Product id | P240327135 |
| Language |
The Tripet TST 200 CNC is a high-precision internal cylindrical grinding machine designed for complex and accurate grinding tasks. Manufactured in 1986, this machine features CNC control over three axes (Z, X, and U) equipped with an electric hand wheel, enabling advanced grinding programs such as pendular grinding, double pendular grinding, blind hole grinding with face grinding, plunge-cut grinding, and automatic dressing compensation.
It supports a maximum internal grinding diameter of approximately 120 mm and a maximum grinding length of 200 mm. The machine allows a maximum height from spindle to table of 200 mm, accommodating a variety of workpiece sizes. The work spindle admits components up to 40 mm, with a table stroke (Z axis) of up to 480 mm, cross adjustment on the workpiece (X axis) of 50 mm, and turret head cross adjustment (U axis) also of 50 mm. The work spindle head swivels manually between -30° and +45°.
The spindle motor delivers 4 kW of power, driving the grinding spindle at speeds ranging from 9,500 to 150,000 rpm. The work spindle speed is infinitely variable between 75 and 1,300 rpm. The total electrical load of the machine is approximately 8 kW, operating at 380 V and 50 Hz. The machine weighs around 3,000 kg.
The machine is housed in a green enclosure with transparent protective guards, ensuring operator safety. It includes a control panel with multiple buttons and indicator lights, topped with two signal tower lights for operational status indication. Hydraulic or pneumatic components and tubing are mounted on the side and rear of the machine, supporting its operational functions. Inside the enclosure, the grinding wheel spindle, bed, carriage assembly, and workpiece holding fixtures are visible. An adjustable lamp mounted over the grinding area provides focused illumination. The machine shows minor surface wear and paint chipping on the base but appears clean and well-maintained overall. All visible hoses and wiring appear intact with no visible damage.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Quotation
CNC-Controlled High Precision Internal Grinding Centre
Grinding diameter, internal, max., approx. 3 -
120 mm
Grinding depth, approx. 200 mm
Height of centres above rotating workpiece slide 132 mm
Max. swing Ø in front of rotating workpiece slide,
approx. 450 mm
Work spindle admission 40 mm
Table stroke, max. (Z axis) 480 mm
Workpiece cross adjustment (X axis) 50 mm
Turret head cross adjustment (U axis) 50 mm
Workspindle head swivelling (B axis) -30
/ +45 ° (manual)
Speeds of workspindle, infinitely variable 75 –
1,300 rpm
Grinding spindle speeds 9,500 –
150,000 rpm
Grinding spindle drive 4 kW
Total electrical load, approx. 8 kW - 380
V - 50 Hz
Weight, approx. 3,000 kg
Accessories / Special Features
* TRIPET (Bruetsch) CNC Control for 3 axes (Z, X and U) with electric hand wheel, with the usual programs such
as pendular grinding, double pendular grinding, blind hole grinding (with face
grinding), plunge-cut grinding, and automatic compensation of the dressing
amount. Feed movements via stepping
motor and roller-thread spindles (with hydraulic linear amplifier in the Z
Axis).
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Machinery dealer |
| Active since | 2019 |
| Offers online | 162 |
| Last activity | Nov. 16, 2026 |
Quotation
CNC-Controlled High Precision Internal Grinding Centre
Grinding diameter, internal, max., approx. 3 -
120 mm
Grinding depth, approx. 200 mm
Height of centres above rotating workpiece slide 132 mm
Max. swing Ø in front of rotating workpiece slide,
approx. 450 mm
Work spindle admission 40 mm
Table stroke, max. (Z axis) 480 mm
Workpiece cross adjustment (X axis) 50 mm
Turret head cross adjustment (U axis) 50 mm
Workspindle head swivelling (B axis) -30
/ +45 ° (manual)
Speeds of workspindle, infinitely variable 75 –
1,300 rpm
Grinding spindle speeds 9,500 –
150,000 rpm
Grinding spindle drive 4 kW
Total electrical load, approx. 8 kW - 380
V - 50 Hz
Weight, approx. 3,000 kg
Accessories / Special Features
* TRIPET (Bruetsch) CNC Control for 3 axes (Z, X and U) with electric hand wheel, with the usual programs such
as pendular grinding, double pendular grinding, blind hole grinding (with face
grinding), plunge-cut grinding, and automatic compensation of the dressing
amount. Feed movements via stepping
motor and roller-thread spindles (with hydraulic linear amplifier in the Z
Axis).
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Category | Grinding - Cylindrical external / internal grinding machines |
| Max. grinding length | 200 mm |
| Grinding diameter | 120 mm |
| CNC | Yes |
| Type of CNC | |
| Max. height from spindle to table | 200 mm |
| Max. wheel speed | 1300 rpm |
| Spindle motor power | 4 kW |
| Weight | 3000 kg |
| worked hours | |
| hours under power | |
| state | good |
| At local norms | --------- |
| status | visible |
| Last availability date | 09/10/2026 |
| Product id | P240327135 |
| Language |
The Tripet TST 200 CNC is a high-precision internal cylindrical grinding machine designed for complex and accurate grinding tasks. Manufactured in 1986, this machine features CNC control over three axes (Z, X, and U) equipped with an electric hand wheel, enabling advanced grinding programs such as pendular grinding, double pendular grinding, blind hole grinding with face grinding, plunge-cut grinding, and automatic dressing compensation.
It supports a maximum internal grinding diameter of approximately 120 mm and a maximum grinding length of 200 mm. The machine allows a maximum height from spindle to table of 200 mm, accommodating a variety of workpiece sizes. The work spindle admits components up to 40 mm, with a table stroke (Z axis) of up to 480 mm, cross adjustment on the workpiece (X axis) of 50 mm, and turret head cross adjustment (U axis) also of 50 mm. The work spindle head swivels manually between -30° and +45°.
The spindle motor delivers 4 kW of power, driving the grinding spindle at speeds ranging from 9,500 to 150,000 rpm. The work spindle speed is infinitely variable between 75 and 1,300 rpm. The total electrical load of the machine is approximately 8 kW, operating at 380 V and 50 Hz. The machine weighs around 3,000 kg.
The machine is housed in a green enclosure with transparent protective guards, ensuring operator safety. It includes a control panel with multiple buttons and indicator lights, topped with two signal tower lights for operational status indication. Hydraulic or pneumatic components and tubing are mounted on the side and rear of the machine, supporting its operational functions. Inside the enclosure, the grinding wheel spindle, bed, carriage assembly, and workpiece holding fixtures are visible. An adjustable lamp mounted over the grinding area provides focused illumination. The machine shows minor surface wear and paint chipping on the base but appears clean and well-maintained overall. All visible hoses and wiring appear intact with no visible damage.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2019 |
| Offers online | 162 |
| Last activity | Nov. 16, 2026 |