Contact us to receive an offer.
| Manufacturer | Tripet |
|---|---|
| Model | MUR 100 |
| Year | |
| Location | Switzerland
|
A grinding machine is offered with capabilities for internal, external, cylindrical and surface grinding. The stated grinding range is 1–100 mm. The specified diameters are 0.5–15 mm for internal grinding and 0.1–15 mm for external grinding. Values of 80 mm and 60 mm are given for the cylindrical surface. The centre height is 60 mm.
The main longitudinal carriage has a travel of 225 mm. The grinding head moves automatically 1 mm longitudinally and 15 mm transversely. The specified speed is 0–8 m/min. The workhead swivels 50° forward and 90° backward.
The motor power and speeds are: hydraulic pump — 0.1 kW and 1400 rpm; workhead spindle — 0.23 kW and 3000 rpm; external grinding — 0.37 kW and 2880 rpm; coolant pump — 0.2 kW and 2800 rpm; surface grinding — 0.11 kW and 2760 rpm. The workhead spindle has a speed range of 150–1500 rpm. For internal grinding, JS 80 air turbines rated at 80 000 rpm and JS 130 air turbines rated at 120 000 rpm are specified. High-frequency spindles are available on request. The external grinding spindles run at 4900/5600 and 6700/7900 rpm, while the surface grinding attachment runs at 7250 rpm.
Grinding wheels for air-turbine spindles with special steel shanks Ø 3 and 6 mm are provided, along with standard wheels Ø 3–8 mm and diamond wheels Ø 0.4–6 mm. The maximum wheel diameter for external grinding is 100 mm. A 50 × 30 × 10 mm bell-shaped wheel is specified for surface grinding.
The workhead spindle uses W12 collets in sizes 0.5–10 mm. The spindle nose thread is 25 × 2.5 mm, and the maximum clamping length between centres is 125 mm. Automatic feed is up to 0.4 mm for the complete cycle, comprising rough, fine and finish grinding; the time can be adjusted from 30 seconds to 25 minutes.
The stated configuration includes a workhead spindle with manual micrometric adjustment, automatic feed, a grinding-wheel dressing attachment, a micrometric stop for the grinding-head slide, a cabinet for the hydraulic and electrical equipment, attachments for external, cylindrical and surface grinding, an automatic work cycle and a three-jaw support. The set also includes a JS 120 sleeve and a JS 80 spindle head with collets, a round magnetic chuck Ø 100 mm, a drive plate with a rotating belt pulley for grinding between dead centres, a lever-operated quick-clamping device, 3 W12 centres, a set of 24 W12 collets, a WALDMANN halogen lamp, a coolant system with tank and pump, and an operating manual. The description states that the tank and pump, quick-clamping device and halogen lamp are new.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Capacity
Grinding range 1-100mm
Grinding Diameter
internal : 0.5-15 mm
external : 0,1-15 mm
Circular surface : 80 mm 60 mm
Centre height : 60 mm
Slide movements
Basic longitudinal slide : 225 mm
Grinding head
longitudinal (automatique) : 1 mm
transversal : 15 mm
Speed : 0-8 m/min
Work headstock swivel
Front : 50°
Back : 90°
Motors
Hydraulic pump 0.1 KW 1400 rpm
Work headstock : 0.23 KW, 3000 rpm
External grinding : 0.37 KW, 2880 rpm
Coolant pump : 0.2 KW, 2800 rpm
Face grinding : 0.11 KW, 2760 rpm
Spindle speeds
Work headstock : 150-1500 rpm
Internal grinding quills
JS 80 air turbine : 80'000 rpm
JS 130 air turbine : 120'000 rpm
High-frequency quills : on request
External grinding quills 4900/5600 rpm 6700/7900 rpm
Face grinding atachment : 7250 t/min
Grinding wheels
For air turbine quills on special steel shanks Ø 3 et 6 mm
Standard wheels : Ø 3-8 mm
Diamond wheels : Ø 0.4-6 mm
For external grinding : Ø max. 100 mm
For face grinding bell-shaped grinding wheels : Ø 50x30x10 mm
Work headstock
Collets 0.5-10 mm : W12
Spindle nose thread : 25x2.5 mm
max. clamping length between centres : 125 mm
Automatic infeed
Full cycle max. 0,4 mm (Roughing. finishing and sparkout) adjustable from 30 sec to 25 minutes
Composition
Work Headstock
Manual micrometer adjustment
Automatic infeed
Wheel dressing atachment
Micrometer stop on grinding head slide
Hydraulics and electrics cabinet
External grinding
Circular surface grinding
Face grinding attachment
Automatic work cycle
Three-jaw steady rest
1 Air turbine quills JS 120 (120'000 t/min.) with collets
1 Air turbine quillsJS 80 (80'000 t/min.) with collets
1 circular magnetic chuck Ø 100 mm, réf. 30
Driver plate with revolving belt pully for grinding between dead centres, réf. 40dx
New quick lever chucking attachment on the work headstock
3 centres W12
Set of 24 collets W12
Halogen lamp WALDMANN neuve
Coolant system (NEW tank + pump )
Operating manual
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Machinery dealer |
| Active since | 2008 |
| Offers online | 42 |
| Last activity | Nov. 7, 2026 |
Capacity
Grinding range 1-100mm
Grinding Diameter
internal : 0.5-15 mm
external : 0,1-15 mm
Circular surface : 80 mm 60 mm
Centre height : 60 mm
Slide movements
Basic longitudinal slide : 225 mm
Grinding head
longitudinal (automatique) : 1 mm
transversal : 15 mm
Speed : 0-8 m/min
Work headstock swivel
Front : 50°
Back : 90°
Motors
Hydraulic pump 0.1 KW 1400 rpm
Work headstock : 0.23 KW, 3000 rpm
External grinding : 0.37 KW, 2880 rpm
Coolant pump : 0.2 KW, 2800 rpm
Face grinding : 0.11 KW, 2760 rpm
Spindle speeds
Work headstock : 150-1500 rpm
Internal grinding quills
JS 80 air turbine : 80'000 rpm
JS 130 air turbine : 120'000 rpm
High-frequency quills : on request
External grinding quills 4900/5600 rpm 6700/7900 rpm
Face grinding atachment : 7250 t/min
Grinding wheels
For air turbine quills on special steel shanks Ø 3 et 6 mm
Standard wheels : Ø 3-8 mm
Diamond wheels : Ø 0.4-6 mm
For external grinding : Ø max. 100 mm
For face grinding bell-shaped grinding wheels : Ø 50x30x10 mm
Work headstock
Collets 0.5-10 mm : W12
Spindle nose thread : 25x2.5 mm
max. clamping length between centres : 125 mm
Automatic infeed
Full cycle max. 0,4 mm (Roughing. finishing and sparkout) adjustable from 30 sec to 25 minutes
Composition
Work Headstock
Manual micrometer adjustment
Automatic infeed
Wheel dressing atachment
Micrometer stop on grinding head slide
Hydraulics and electrics cabinet
External grinding
Circular surface grinding
Face grinding attachment
Automatic work cycle
Three-jaw steady rest
1 Air turbine quills JS 120 (120'000 t/min.) with collets
1 Air turbine quillsJS 80 (80'000 t/min.) with collets
1 circular magnetic chuck Ø 100 mm, réf. 30
Driver plate with revolving belt pully for grinding between dead centres, réf. 40dx
New quick lever chucking attachment on the work headstock
3 centres W12
Set of 24 collets W12
Halogen lamp WALDMANN neuve
Coolant system (NEW tank + pump )
Operating manual
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
A grinding machine is offered with capabilities for internal, external, cylindrical and surface grinding. The stated grinding range is 1–100 mm. The specified diameters are 0.5–15 mm for internal grinding and 0.1–15 mm for external grinding. Values of 80 mm and 60 mm are given for the cylindrical surface. The centre height is 60 mm.
The main longitudinal carriage has a travel of 225 mm. The grinding head moves automatically 1 mm longitudinally and 15 mm transversely. The specified speed is 0–8 m/min. The workhead swivels 50° forward and 90° backward.
The motor power and speeds are: hydraulic pump — 0.1 kW and 1400 rpm; workhead spindle — 0.23 kW and 3000 rpm; external grinding — 0.37 kW and 2880 rpm; coolant pump — 0.2 kW and 2800 rpm; surface grinding — 0.11 kW and 2760 rpm. The workhead spindle has a speed range of 150–1500 rpm. For internal grinding, JS 80 air turbines rated at 80 000 rpm and JS 130 air turbines rated at 120 000 rpm are specified. High-frequency spindles are available on request. The external grinding spindles run at 4900/5600 and 6700/7900 rpm, while the surface grinding attachment runs at 7250 rpm.
Grinding wheels for air-turbine spindles with special steel shanks Ø 3 and 6 mm are provided, along with standard wheels Ø 3–8 mm and diamond wheels Ø 0.4–6 mm. The maximum wheel diameter for external grinding is 100 mm. A 50 × 30 × 10 mm bell-shaped wheel is specified for surface grinding.
The workhead spindle uses W12 collets in sizes 0.5–10 mm. The spindle nose thread is 25 × 2.5 mm, and the maximum clamping length between centres is 125 mm. Automatic feed is up to 0.4 mm for the complete cycle, comprising rough, fine and finish grinding; the time can be adjusted from 30 seconds to 25 minutes.
The stated configuration includes a workhead spindle with manual micrometric adjustment, automatic feed, a grinding-wheel dressing attachment, a micrometric stop for the grinding-head slide, a cabinet for the hydraulic and electrical equipment, attachments for external, cylindrical and surface grinding, an automatic work cycle and a three-jaw support. The set also includes a JS 120 sleeve and a JS 80 spindle head with collets, a round magnetic chuck Ø 100 mm, a drive plate with a rotating belt pulley for grinding between dead centres, a lever-operated quick-clamping device, 3 W12 centres, a set of 24 W12 collets, a WALDMANN halogen lamp, a coolant system with tank and pump, and an operating manual. The description states that the tank and pump, quick-clamping device and halogen lamp are new.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2008 |
| Offers online | 42 |
| Last activity | Nov. 7, 2026 |
Универсална шлифовъчна машина Tripet MUR 100
Bruska Tripet MUR 100
Tripet MUR 100 universal-slibemaskine
Tripet MUR 100 Schleifmaschine
Tripet MUR 100 Παγκόσμιας χρήσης μηχανή λείανσης
Tripet MUR 100 Universal grinding machine
Rectificadora Tripet MUR 100
Rectifieuse Tripet MUR 100
Tripet MUR 100 univerzalna brusilica
Tripet MUR 100 univerzális csiszológép
Rettificatrice Tripet MUR 100
„Tripet MUR 100“ universali šlifavimo staklė
Tripet MUR 100 universele slijpmachine
Szlifierka do walkow Tripet MUR 100
Tripet MUR 100 — Máquina de esmerilagem universal
Mașină universală de șlefuit Tripet MUR 100
Tripet MUR 100 Шлифовальный станок
Tripet MUR 100 univerzalna brusna mašina
Tripet MUR 100 universalslipmaskin
Taşlama makinesi Tripet MUR 100
EN
- Languages
English (GB)