| Manufacturer | TOS Varnsdorf |
|---|---|
| Model | WH 105 CNC |
| Year | 2004 |
| Location | Czech Republic
|
TOS Varnsdorf WH 105 CNC (year manufactured: 2004). Control: Heidenhain TNC 430. Main spindle: 105 mm diameter, ISO 50 taper, max speed 0–3300 rpm. Travels: X = 1800 mm, Y = 1250 mm, Z = 1250 mm; spindle (W) travel 630 mm. Table: clamping area 1250 x 1400 mm, max. workpiece weight 4000 kg. Cooling through spindle: NO. Tool magazine: NO.
Electrical and drive components: the electrical cabinet contains a rack of Siemens SIMODRIVE modules, with multiple bundled power and signal cables routed alongside the cabinet. Several drive modules show illuminated green indicator LEDs. Green/yellow earthing/grounding conductors are connected at the lower terminals.
Machine layout and fixtures: large vertical boring/milling machine with a circular rotary table and T-slotted table surfaces on both sides. A spindle head is mounted on the vertical column and a control pendant is mounted on a stand at the side. A workholding fixture is bolted to the rotary table.
Condition notes (visual): guideways and sliding surfaces show a polished finish with longitudinal finish marks, minor surface scratches and light wear lines; a few small indentations or pits are present on a vertical guideway. Coolant/oil residue and metal chips are present in side gutters and on machine surfaces and floor. The spindle/shaft extension is mounted with a left-end bearing housing and shows circumferential polishing marks and light wear/discoloration bands. A leadscrew/ball screw is present on the column side.
These condition remarks are visual observations intended for guidance; no statements about operational status, testing, or guarantees are provided.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Technical parameters:
- Control system Heidenhain: TNC 430
- Diameter of working spindle: 105 mm
- Travel X-axis: 1800 mm
- Travel Y-axis: 1250 mm
- Spindle speed: 0 - 3300 /min.
- Cooling through spindle: NO
- Spindle travel - W axis: 630 mm
- Travel Z-axis: 1250 mm
- Tool magazine: NO
- Spindle taper: ISO 50 .
- Max. load of table: 4000 kg
- Clamping area of table: 1250 x 1400 mm
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Machinery dealer |
| Active since | 2021 |
| Offers online | 16 |
| Last activity | Nov. 11, 2026 |
Technical parameters:
- Control system Heidenhain: TNC 430
- Diameter of working spindle: 105 mm
- Travel X-axis: 1800 mm
- Travel Y-axis: 1250 mm
- Spindle speed: 0 - 3300 /min.
- Cooling through spindle: NO
- Spindle travel - W axis: 630 mm
- Travel Z-axis: 1250 mm
- Tool magazine: NO
- Spindle taper: ISO 50 .
- Max. load of table: 4000 kg
- Clamping area of table: 1250 x 1400 mm
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
TOS Varnsdorf WH 105 CNC (year manufactured: 2004). Control: Heidenhain TNC 430. Main spindle: 105 mm diameter, ISO 50 taper, max speed 0–3300 rpm. Travels: X = 1800 mm, Y = 1250 mm, Z = 1250 mm; spindle (W) travel 630 mm. Table: clamping area 1250 x 1400 mm, max. workpiece weight 4000 kg. Cooling through spindle: NO. Tool magazine: NO.
Electrical and drive components: the electrical cabinet contains a rack of Siemens SIMODRIVE modules, with multiple bundled power and signal cables routed alongside the cabinet. Several drive modules show illuminated green indicator LEDs. Green/yellow earthing/grounding conductors are connected at the lower terminals.
Machine layout and fixtures: large vertical boring/milling machine with a circular rotary table and T-slotted table surfaces on both sides. A spindle head is mounted on the vertical column and a control pendant is mounted on a stand at the side. A workholding fixture is bolted to the rotary table.
Condition notes (visual): guideways and sliding surfaces show a polished finish with longitudinal finish marks, minor surface scratches and light wear lines; a few small indentations or pits are present on a vertical guideway. Coolant/oil residue and metal chips are present in side gutters and on machine surfaces and floor. The spindle/shaft extension is mounted with a left-end bearing housing and shows circumferential polishing marks and light wear/discoloration bands. A leadscrew/ball screw is present on the column side.
These condition remarks are visual observations intended for guidance; no statements about operational status, testing, or guarantees are provided.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2021 |
| Offers online | 16 |
| Last activity | Nov. 11, 2026 |
TOS Varnsdorf WH 105 CNC — Хоризонтален пробивен машин, 2004 (261421)
TOS Varnsdorf WH 105 CNC — Vodorovná vyvrtávačka, 2004 (261421)
TOS Varnsdorf WH 105 CNC — Horisontal boreanlæg, 2004 (261421)
TOS Varnsdorf WH 105 CNC — Horizontalbohrmaschine, 2004 (261421)
TOS Varnsdorf WH 105 CNC — Οριζόντιο μηχάνημα διάτρησης, 2004 (261421)
TOS Varnsdorf WH 105 CNC — Horizontal boring machine, 2004 (261421)
TOS Varnsdorf WH 105 CNC — Máquina taladradora horizontal, 2004 (261421)
TOS Varnsdorf WH 105 CNC — Perceuse horizontale, 2004 (261421)
TOS Varnsdorf WH 105 CNC — Horizontalni stroj za bušenje, 2004 (261421)
TOS Varnsdorf WH 105 CNC — Vízszintes furógép, 2004 (261421)
TOS Varnsdorf WH 105 CNC — Trapano orizzontale, 2004 (261421)
TOS Varnsdorf WH 105 CNC — Horizontalus gręžimo staklės, 2004 m. (261421)
TOS Varnsdorf WH 105 CNC — Horizontale boormachine, 2004 (261421)
TOS Varnsdorf WH 105 CNC — Wiertarka pozioma, 2004 (261421)
TOS Varnsdorf WH 105 CNC — Máquina de furação horizontal, 2004 (261421)
TOS Varnsdorf WH 105 CNC — Mașină de găurire orizontală, 2004 (261421)
TOS Varnsdorf WH 105 CNC — Горизонтально-расточной станок, 2004 (261421)
TOS Varnsdorf WH 105 CNC — Horizontalni bušilica, 2004 (261421)
TOS Varnsdorf WH 105 CNC — Horisontell borrmaskin, 2004 (261421)
TOS Varnsdorf WH 105 CNC — Yatay delme makinesi, 2004 (261421)
EN
- Languages
English (GB)