Contact us to receive an offer.
| Manufacturer | TOS Trenčín |
|---|---|
| Model | SV 18RA/1000 |
| Year | |
| Location | Czech Republic
|
| Category | Lathes - Parallel lathes (0 - 3000 mm) |
| Length between centers | 1000 mm |
| Ø above the bed | 380 mm |
| Spindle nose | |
| Overhauled | no |
| Tailstock | no |
| Steady | no |
| worked hours | |
| hours under power | |
| state | good |
| At local norms | --------- |
| status | visible |
| Last availability date | 26/10/2026 |
| Product id | P230515015 |
| Language |
TOS Trenčín SV 18RA/1000
Soustruh TOS Trenčín SV 18RA/1000
TOS Trenčín SV 18RA/1000
TOS Trenčín SV 18RA/1000 Drehmaschine
TOS Trenčín SV 18RA/1000
TOS Trenčín SV 18RA/1000 lathe
Torno TOS Trenčín SV 18RA/1000
Tour TOS Trenčín SV 18RA/1000
TOS Trenčín SV 18RA/1000
TOS Trenčín SV 18RA/1000
Tornio TOS Trenčín SV 18RA/1000
TOS Trenčín SV 18RA/1000
TOS Trenčín SV 18RA/1000
Tokarka TOS Trenčín SV 18RA/1000
TOS Trenčín SV 18RA/1000
TOS Trenčín SV 18RA/1000
TOS Trenčín SV 18RA/1000 Токарный станок
TOS Trenčín SV 18RA/1000
TOS Trenčín SV 18RA/1000
Torna TOS Trenčín SV 18RA/1000
|
This TOS Trenčín SV 18RA/1000 metal lathe offers a center distance of 1000 mm and a maximum revolving diameter above the bed of 380 mm. The machine is equipped with a variety of accessories to support versatile machining operations, including one four-jaw chuck with jaws, one three-jaw chuck with both hard and soft jaws, a tool counter-holder, a sliding bezel, a tapping and drilling head, and two rotating tips. The lathe features a control panel protected by a glass shield, which includes two large knobs and three buttons (red, green, and yellow) for operational control. The headstock is fitted with two control levers and two buttons (red and green), facilitating machine operation. A handwheel is located on the front lower section of the lathe for manual adjustments. The lathe bed includes two parallel guide rails with visible ways, supporting the carriage and cross slide, which show some surface wear consistent with use. The tailstock, equipped with a pointed center, is mounted on the right side of the lathe bed. The chuck is mounted on the spindle and positioned on the left side of the lathe bed along with a tool post that holds multiple tools and adjustment bolts. The machine exhibits signs of paint wear, chipping, and dirt accumulation, reflecting its age and usage history. Prior arrangement allows for inspection of the machine in operation. This lathe is suitable for various metalworking tasks requiring precision and flexibility.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
The machine is in good technical condition. Revolving diameter above the bed: 380mm Center distance: 1000mm 1pc: four-jaw chuck + jaws 1pc: three-jaw chuck + hard and soft jaws 1pc: tool counter-holder 1pc: sliding bezel 1pc: tapping and drilling head 2pc: rotating tip By prior arrangement, the possibility of inspection in operation .
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Machinery dealer |
| Active since | 2020 |
| Offers online | 477 |
| Last activity | Nov. 5, 2026 |
The machine is in good technical condition. Revolving diameter above the bed: 380mm Center distance: 1000mm 1pc: four-jaw chuck + jaws 1pc: three-jaw chuck + hard and soft jaws 1pc: tool counter-holder 1pc: sliding bezel 1pc: tapping and drilling head 2pc: rotating tip By prior arrangement, the possibility of inspection in operation .
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Category | Lathes - Parallel lathes (0 - 3000 mm) |
| Length between centers | 1000 mm |
| Ø above the bed | 380 mm |
| Spindle nose | |
| Overhauled | no |
| Tailstock | no |
| Steady | no |
| worked hours | |
| hours under power | |
| state | good |
| At local norms | --------- |
| status | visible |
| Last availability date | 26/10/2026 |
| Product id | P230515015 |
| Language |
TOS Trenčín SV 18RA/1000
Soustruh TOS Trenčín SV 18RA/1000
TOS Trenčín SV 18RA/1000
TOS Trenčín SV 18RA/1000 Drehmaschine
TOS Trenčín SV 18RA/1000
TOS Trenčín SV 18RA/1000 lathe
Torno TOS Trenčín SV 18RA/1000
Tour TOS Trenčín SV 18RA/1000
TOS Trenčín SV 18RA/1000
TOS Trenčín SV 18RA/1000
Tornio TOS Trenčín SV 18RA/1000
TOS Trenčín SV 18RA/1000
TOS Trenčín SV 18RA/1000
Tokarka TOS Trenčín SV 18RA/1000
TOS Trenčín SV 18RA/1000
TOS Trenčín SV 18RA/1000
TOS Trenčín SV 18RA/1000 Токарный станок
TOS Trenčín SV 18RA/1000
TOS Trenčín SV 18RA/1000
Torna TOS Trenčín SV 18RA/1000
|
This TOS Trenčín SV 18RA/1000 metal lathe offers a center distance of 1000 mm and a maximum revolving diameter above the bed of 380 mm. The machine is equipped with a variety of accessories to support versatile machining operations, including one four-jaw chuck with jaws, one three-jaw chuck with both hard and soft jaws, a tool counter-holder, a sliding bezel, a tapping and drilling head, and two rotating tips. The lathe features a control panel protected by a glass shield, which includes two large knobs and three buttons (red, green, and yellow) for operational control. The headstock is fitted with two control levers and two buttons (red and green), facilitating machine operation. A handwheel is located on the front lower section of the lathe for manual adjustments. The lathe bed includes two parallel guide rails with visible ways, supporting the carriage and cross slide, which show some surface wear consistent with use. The tailstock, equipped with a pointed center, is mounted on the right side of the lathe bed. The chuck is mounted on the spindle and positioned on the left side of the lathe bed along with a tool post that holds multiple tools and adjustment bolts. The machine exhibits signs of paint wear, chipping, and dirt accumulation, reflecting its age and usage history. Prior arrangement allows for inspection of the machine in operation. This lathe is suitable for various metalworking tasks requiring precision and flexibility.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2020 |
| Offers online | 477 |
| Last activity | Nov. 5, 2026 |
EN
- Languages
English (GB)