Contact us to receive an offer.
| Category | Milling - Miscellaneous milling machines |
| X axis | 720 mm |
| Y axis | 420 mm |
| Z axis | 360 mm |
| CNC type | |
| Table length | 1000 mm |
| Table width | 320 mm |
| Table area (mm x mm) | |
| Spindle taper | |
| worked hours | |
| hours under power | |
| state | good |
| At local norms | --------- |
| status | |
| Last availability date | 13/11/2026 |
| Product id | P230802215 |
| Language |
This listing features a TOS FGS 25/32 milling machine, manufactured in 1990. The machine is equipped with a spacious working table measuring 1000 mm in length and 320 mm in width, providing ample space for various milling operations. It offers substantial travel distances along its axes, with the X-axis capable of 720 mm movement, the Y-axis 420 mm, and the Z-axis 360 mm, allowing for versatile machining capabilities.
The milling machine includes a digital readout (DRO) system, which is mounted on the top right side, enhancing precision by allowing operators to monitor positioning accurately. Below the DRO, there is a control panel featuring multiple push buttons and switches, facilitating operational control. Manual control is also supported via hand wheels located near the worktable.
The machine is painted green and features an electrical motor mounted on top. A large green box is situated on the left side, likely housing electrical components or possibly a coolant system. Electrical cables and hoses are connected at the base and sides of the machine, indicating it is set up for electrical and fluid connections.
The worktable surface shows signs of use and some dirt accumulation, and the machine exhibits signs of wear including rust spots on metal surfaces. It is mounted on wooden blocks, which may be for stability or transport purposes. Control knobs and electrical cables are visible on the front side, supporting operational adjustments.
Overall, this TOS milling machine presents a robust setup suitable for various milling tasks, with a combination of manual and digital controls, though it shows typical signs of wear consistent with its age.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Characteristic:
Length of the working table: 1000 mm
Width of the working table: 320 mm
X-Axis travels: 720 mm
Y-Axis travels: 420 mm
Z-Axis travels: 360 mm
Equipment:
DRO
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Machinery dealer |
| Active since | 2008 |
| Offers online | 1159 |
| Last activity | Nov. 16, 2026 |
Characteristic:
Length of the working table: 1000 mm
Width of the working table: 320 mm
X-Axis travels: 720 mm
Y-Axis travels: 420 mm
Z-Axis travels: 360 mm
Equipment:
DRO
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Category | Milling - Miscellaneous milling machines |
| X axis | 720 mm |
| Y axis | 420 mm |
| Z axis | 360 mm |
| CNC type | |
| Table length | 1000 mm |
| Table width | 320 mm |
| Table area (mm x mm) | |
| Spindle taper | |
| worked hours | |
| hours under power | |
| state | good |
| At local norms | --------- |
| status | |
| Last availability date | 13/11/2026 |
| Product id | P230802215 |
| Language |
This listing features a TOS FGS 25/32 milling machine, manufactured in 1990. The machine is equipped with a spacious working table measuring 1000 mm in length and 320 mm in width, providing ample space for various milling operations. It offers substantial travel distances along its axes, with the X-axis capable of 720 mm movement, the Y-axis 420 mm, and the Z-axis 360 mm, allowing for versatile machining capabilities.
The milling machine includes a digital readout (DRO) system, which is mounted on the top right side, enhancing precision by allowing operators to monitor positioning accurately. Below the DRO, there is a control panel featuring multiple push buttons and switches, facilitating operational control. Manual control is also supported via hand wheels located near the worktable.
The machine is painted green and features an electrical motor mounted on top. A large green box is situated on the left side, likely housing electrical components or possibly a coolant system. Electrical cables and hoses are connected at the base and sides of the machine, indicating it is set up for electrical and fluid connections.
The worktable surface shows signs of use and some dirt accumulation, and the machine exhibits signs of wear including rust spots on metal surfaces. It is mounted on wooden blocks, which may be for stability or transport purposes. Control knobs and electrical cables are visible on the front side, supporting operational adjustments.
Overall, this TOS milling machine presents a robust setup suitable for various milling tasks, with a combination of manual and digital controls, though it shows typical signs of wear consistent with its age.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2008 |
| Offers online | 1159 |
| Last activity | Nov. 16, 2026 |